New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Fort Worth
Window installation in Fort Worth runs $450 to $1,800 per opening for most homes, depending on the window type, frame condition, and whether the opening needs structural work. That range covers everything from a straightforward vinyl replacement in a Fairmount bungalow to an impact-rated picture window that requires new jamb framing in a Wedgwood ranch. Our crews know Fort Worth’s housing stock block by block, and we quote every job in writing before the first screw turns. Call (682) 354-9300 to get your number.
Fort Worth’s dramatic weather swings – from triple-digit July heat to spring hailstorms and the occasional February freeze – put real stress on window frames, seals, and glass. A window that leaks air in a 90 mph wind or lets UV fade your floors in August isn’t just inefficient. It’s costing you money every month. That’s why we treat window installation here as more than a swap-out. It’s an opening-by-opening assessment of what the original builder got right, what decades of North Texas weather have undone, and what the City of Fort Worth now requires when we pull a permit.
Why Juniper Windows Fort Worth Is Fort Worth’s Preferred Window Installation Company
Juniper Windows & Doors has been doing Window Installation since 2001, and we carry that experience into every Fort Worth neighborhood we serve – Fairmount, Wedgwood, Ridglea, Northside, Arlington Heights, and everywhere in between. Sean Mackey leads our Fort Worth team with a simple operating rule: if a wall is open, the homeowner knows what’s behind it before we touch it. That means inspection first, written allowances second, and a change order only when there’s something real to change.
Every Juniper technician is background-checked and uniformed, so the person at your door is someone we’d send to our own parents’ house. Our Fort Worth customers get a live arrival time they can track, before-and-after photos of every opening, and a digital invoice they can pay from a link. No four-hour windows. No no-shows. No quote that morphs at the door. That’s the Relay Standard, and it’s how we’ve earned the trust of homeowners from Haltom City to Keller.
The 365-Day Done Right Promise covers parts and labor on every completed installation, in writing. If something isn’t right, we make it right – free second visit, no argument. And when you call us at (682) 354-9300, a live person answers. Not a voicemail maze. Not a callback queue. A person, 24/7.
Vinyl Windows in Fort Worth
Vinyl Windows in Fort Worth are the workhorse choice for older ranch homes and budget-conscious replacements, and we install them with the same framing scrutiny we apply to impact-rated glass. A typical vinyl double-hung replacement runs $450 to $900 per opening in Fort Worth, installed. That assumes the existing jamb is sound and the opening doesn’t need structural repair. Vinyl makes sense here because it won’t rot when a spring storm drives hail-melt behind the trim, and it handles Fort Worth’s temperature swings without warping like wood.
Single and Double Hung Vinyl
Double-hung vinyl windows let you tilt both sashes inward for cleaning, which matters in Fort Worth where spring pollen and red-dirt dust coat everything. Single-hung units are more affordable and work well on front elevations where you’ll never open the top sash anyway. We stock both styles in multiple grid patterns so a replacement doesn’t look like an afterthought on a 1950s brick ranch.
Horizontal Roller and 3-Panel Sliding Vinyl
Horizontal roller windows are common in Fort Worth’s mid-century homes, especially across the back of a house facing a patio or porch. When we replace them, we check the sill drainage plane every time – original felt paper on a 1960s opening often wasn’t lapped correctly, and hail-melt finds its way behind the nailing flange. A 3-panel sliding vinyl window in Fort Worth typically runs $1,100 to $1,800, depending on width and how much jamb repair the opening needs.
Picture Window in Fort Worth
A Picture Window in Fort Worth is a fixed pane of glass built to frame something – a live oak in the front yard, the downtown skyline from a Ridglea hilltop, or just a lot of North Texas sky. Installed cost runs $600 to $1,400 per opening in Fort Worth for a standard insulated unit, more if you’re stepping up to impact-rated glass. Fixed windows don’t open, so the entire performance story is in the seal: a poor installation leaks air around the frame and fogs up inside the first winter.
Impact-Rated Picture Windows
Fort Worth sits in a hail corridor with wind speeds that regularly exceed 90 mph. A west-facing picture window on a Wedgwood ranch takes the full force of spring storm fronts, and after one good hail season the glass often shows pockmarks and the frame shows dents. We install impact-rated Picture Windows from PGT’s WinGuard line for these exposures. The laminated glass is built to resist wind-borne debris without shattering, and it carries a design pressure rating that actually means something in Collin County wind maps.
Bay and Bow Picture Assemblies
Bay and bow windows combine a fixed center picture window with operable side units. In Fort Worth’s older bungalows, these assemblies usually sit in an opening framed before modern header span tables, so we measure the load path before we order anything. A full bay replacement in a Fairmount craftsman runs $2,200 to $4,500 installed, including the structural assessment and any header upgrade the permit triggers.
Trusted Brands We Service in Fort Worth
We install and service CGI, CWS, and ECO Window Systems product lines across Fort Worth, and we stock common parts locally so turnaround doesn’t stall while a warehouse in another state ships. That means a failed sash on a CGI impact-rated unit in Keller gets replaced days faster than it would through a contractor who has to source everything from Florida. Whether you need a PGT WinGuard picture window or a ViewLux aluminum frame, we match the product to the opening and the exposure – never the other way around.
Common Window Installation Problems We See in Fort Worth Homes
- Caulk-only retrofit on single-pane sashes. Fast temperature swings make the original wood jamb expand and contract, and a bead of caulk cracks within one season. Water and red-dirt dust work their way around the opening, and the homeowner is back where they started.
- Undersized framing on 1970s ranch homes. When a new large-missile-rated unit adds 40 pounds to an opening, the original header can sag within months. The sash starts to bind, and the design pressure rating is voided – which matters when the next hail claim lands on your insurance desk.
- Ignored drainage plane at the sill. Fort Worth’s heavy hail-melt and sudden freezes push water behind the nailing flange if the original felt paper isn’t re-lapped. Hidden rot at the sheathing of double-hung openings is one of the most expensive surprises we find.
- Permit-triggered code upgrades nobody budgeted for. When you open a 1960s Wedgwood wall for a window replacement, the City of Fort Worth may require updated flashing, tempered glazing near doors, or egress compliance. If your quote didn’t include an allowance for this, the change order hits after the wall is open and you have no leverage.
Pricing for Window Installation in Fort Worth, TX
Window installation in Fort Worth runs these ranges, installed: single-hung vinyl $450 to $750 per opening, double-hung vinyl $550 to $900 per opening, horizontal roller $500 to $850, picture windows $600 to $1,400, bay and bow assemblies $2,200 to $4,500, and casement windows $700 to $1,200. Impact-rated glass adds 30 to 60 percent depending on the product line and design pressure rating. What moves the number is what’s inside the wall once it’s open: rotted jambs, undersized headers, missing flashing, and code upgrades the permit triggers. We handle this with inspection first, allowances written into the contract, and any surprise priced and approved in writing before we touch it. Call (682) 354-9300 for a free estimate – you’ll get a written number, not a range that shifts at the door.
We Also Serve Cities Near Fort Worth
Juniper’s Fort Worth crews also serve Haltom City, Keller, and Azle, plus surrounding neighborhoods across the metro. Whether you’re replacing a picture window in a Keller cul-de-sac or a full ranch set in Azle, the same written-price guarantee and 365-Day Done Right Promise apply. See our Window Installation in Fort Worth page for neighborhood-level details or call to schedule an estimate in your area.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Fort Worth
The City of Fort Worth requires any window opening that’s been opened up to meet current code, which typically means flashing at the head and sill, a drainage plane re-lapped to the original sheathing, tempered glass within 24 inches of a door, and egress compliance if the window serves a bedroom. Depending on the age of the home, that can add $150 to $600 per opening. We write these allowances into your contract before the wall opens, so you see the number in writing before we start, not after we find it. Sean Mackey’s rule is simple: no surprise change order on a Fort Worth wall we haven’t priced first. Call (682) 354-9300 for an exact figure on your home.
West-facing windows in Fort Worth take the full brunt of afternoon UV and the leading edge of spring hailstorms, so we see pitted and cracked glass, baked-on seals, and compressed wood jambs that bind the sash. North-facing doors fail differently – they warp in the intense afternoon sun that hits them at a low angle, pulling away from the frame at the top corner. A Wedgwood ranch with a west-facing picture window and a north-facing door may need two entirely different repair approaches in the same house. We price them separately because the failure modes are separate.
A Miami-Dade NOA (Notice of Acceptance) is a product approval with the strictest impact-testing protocol in the country, and it’s the standard we reference for Fort Worth hail zones. A Florida Product Approval is a broader state-level approval that doesn’t require the same large-missile testing. Fort Worth’s hail corridor demands Miami-Dade NOA-rated units for wind-borne debris resistance – not because a Florida approval is useless, but because hail hits harder and faster than most Florida wind events. When we spec an impact-rated window for a Fort Worth home, we’re looking for the NOA stamp first.
We write a change-order allowance as a line item with a fixed dollar band attached to specific conditions: a rotted jamb allowance of X, a header upgrade allowance of Y, a flashing correction allowance of Z. The band is based on what we’ve actually found in Fort Worth homes of that era – a 1960s Wedgwood ranch often needs $200 to $800 in jamb repair per opening, while a 1990s suburb likely needs none. The key is that the allowance is written before the wall opens, and the change order is priced and signed before we do the work. No inflated bids, no surprise invoices. That’s the Juniper standard under Sean Mackey.
The State of Texas doesn’t offer a specific window installation credit, but many Fort Worth homeowners qualify for a property insurance premium reduction after installing hail-rated impact windows, and some local utilities offer rebates for Low-E upgrades. The credit and rebate amounts depend on your insurer and your municipal utility, and we’re happy to point you toward the right forms. The bigger savings is usually the energy bill – Fort Worth summers are brutal, and a properly sealed Low-E window cuts cooling costs measurably. Call (682) 354-9300 and we’ll walk you through what applies to your house.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth and surrounding North Texas neighborhoods.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.