New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Fort Worth
Window replacement in Fort Worth runs $450 to $1,900 per window for most homes, with full-frame work on larger openings reaching $2,800 or more. Impact-rated units built for our wind and hail exposure typically land between $950 and $2,100 installed. The fastest way to get a real number is a free in-home estimate with a written, line-item price before any work starts. Call (682) 354-9300 and we’ll send a background-checked technician to your Fort Worth address, measure everything, and quote the job the same visit.
We know Fort Worth’s housing stock because we work in it every week: the 1920s bungalows in Fairmount with original wood double-hungs, the sprawling 60s and 70s ranches in Wedgwood and Ridglea, the newer builds out toward Keller and Azle. Each era brings its own window problems, and each home needs a different fix. Our crews are dispatched from our Dallas-Fort Worth office and serve Fort Worth locally, so scheduling runs tight and arrival times are live-trackable, not four-hour windows of “sometime.”
Key Takeaways
- Written price before any work starts, backed by the 365-Day Done Right Promise (parts and labor, in writing).
- Impact-rated and high-thermal-performance windows sourced from PGT, ES Windows, ECO Window Systems, and Mr-Glass.
- Fort Worth-specific wind-load compliance handled on every quote: design pressure ratings, product approvals, and windstorm inspection sign-off.
- Live phone answered 24/7 by a real person at (682) 354-9300.
Why Juniper Windows Fort Worth Is Fort Worth’s Preferred Window Replacement Company
Juniper Windows Fort Worth is the window and door specialist inside the Relay Home Co. family, founded in 2001. We’re not a general remodeler dabbling in glass. Window replacement, window installation, and door replacement are what we do. Sean Mackey leads the operation with one standard: every Fort Worth job gets a written price before a single screw turns. No vague estimate. No surprise change order at the door. The number we hand you is the number you pay.
Our Fort Worth customers get the Relay Standard on every project: book in a tap, track a live arrival time, receive before-and-after photos, and pay from a digital invoice link. It’s the same transparency you’d expect from a rideshare app, which sounds like a high bar for a window contractor until you realize it’s just how work should be run. If anything isn’t right after install, the 365-Day Done Right Promise covers it, parts and labor, for a full year. We also answer the phone 24/7 with an actual human. No voicemail maze.
Sean’s teams know Fort Worth’s permitting and wind-load requirements because they’re on our quote sheets, not an afterthought. When you call for window replacement in Fort Worth, you’re talking to people who know that a house off Camp Bowie in Ridglea may trigger a different wind exposure calculation than a ranch home in far north Fort Worth near Alliance. Concreteness builds trust, and trust is what gets a Fort Worth homeowner to hand you their keys.
Window Glass Replacement in Fort Worth
Window glass replacement in Fort Worth typically costs $180 to $450 per pane for standard insulated glass units, climbing to $600 – $1,100 per pane when you need impact-rated laminated glass that meets local wind-borne debris code. A Fort Worth homeowner needs glass replacement when a hailstorm spiderwebs a west-facing pane, when a failed seal fogs the glass between layers, or when a single-light sash cracks from heat stress. You don’t always have to replace the whole window, and we won’t sell you one if the frame is sound.
Hail and Impact Glass
Fort Worth sits squarely in hail country. Spring storms send ice through glass with enough force to punch holes, and even a non-catastrophic hit leaves micro-fractures that widen in the next heat cycle. We stock impact-rated replacement units from PGT and ES Windows with laminated interlayers that hold glass together when struck. That matters to your insurance carrier, which we’ll cover below.
Failed Seals and Fogging
North Texas air is humid, and the intense summer heat cycling on west-facing windows in neighborhoods like Wedgwood or Benbrook breaks down sealant faster than in milder climates. When argon or krypton gas leaks out, condensation appears between the panes and the unit’s U-factor climbs. Our glass replacement swaps in fresh, properly rated insulated units matched to your existing frame. The written price covers removal, new glass, and haul-away.
Window Sash Replacement in Fort Worth
Window sash replacement in Fort Worth averages $350 to $750 per sash for wood or vinyl units on standard double-hung windows, while custom-order sashes for old Fairmount or Mistletoe Heights bungalows start around $600 and can reach $1,400 if rot repair or weatherproofing is included. A sash is the movable or fixed frame that holds the glass. If the sash is warped, rotted, or has broken hardware and balances, replacing just the sash often beats tearing out the entire window and disturbing original trim.
Ranch Home Sash Failures
Fort Worth’s 50s and 60s ranch homes in neighborhoods like Ridglea Hills and Wedgwood East abound with original aluminum sash frames. Decades of hail and heat expansion have bent jambs and stripped the pivot hardware. We replace those sashes with thermally broken or vinyl units that seal tight and slide easily, usually without touching the interior casing. It’s a faster job and a cleaner match than a full frame replacement.
When Sash Replacement Makes Sense
Sash replacement is the right tool when the window opening is plumb and square, the weight pockets or jamb liners are intact, and the existing frame hasn’t shifted. It preserves interior paint and trim work, which matters in Fairmount’s contributing historic structures. We’ll tell you plainly if your frame is too far gone and full-frame replacement in Fort Worth is the honest call. Written quote either way.
Trusted Brands We Service in Fort Worth
Juniper Windows Fort Worth carries and services seven product lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru. For Fort Worth specifically, we lean on PGT’s impact-rated WinGuard series, ES Windows’ thermally broken aluminum profiles, ECO Window Systems’ budget-conscious vinyl, and Mr-Glass for their deep glass-replacement catalog. Parts and glass units for these lines are stocked locally, which means a sash or pane ordered for your Fort Worth home doesn’t sit in a shipping queue for six weeks. Our crews work with these products every day and know their installation tolerances, fastener schedules, and sealant requirements down to the bead size.
Common Window Replacement Problems We See in Fort Worth Homes
- Hail-battered west-facing glass. After spring hailstorms, the west-facing windows of older homes in Wedgwood and Ridglea show pockmarks, stress fractures, and dented frames. Laminated impact-rated replacements are the only permanent fix.
- Buckled vinyl from uncalculated wind loads. Cheap vinyl replacements installed without design-pressure calculations buckle under Fort Worth’s 90 mph straight-line gusts, especially on the windward side of ranch homes in open subdivisions.
- Warped north-facing doors and windows from thermal load. The intense afternoon sun on north-facing ranch home openings in Fort Worth heats dark frames unevenly, leading to warping and stuck sashes. Thermally stable materials matter here.
- Low-E glass ordered for the wrong climate zone. Big-box Low-E glass often carries a solar heat gain coefficient optimized for northern states, not Fort Worth’s August thermal load. The result is a sun-blasted west window that fails to reject heat and warps the frame.
Pricing for Window Replacement in Fort Worth, TX
A typical insert window replacement in Fort Worth runs $450 – $1,200 per window for vinyl, with full-frame replacements starting around $850 per opening and reaching $2,800+ on large custom units or specialty shapes. Impact-rated windows, which we recommend for homes in Fort Worth’s wind-borne debris regions, typically run $950 – $2,100 installed. What moves the number: operating style (picture windows cost less than double-hungs with tilt-sash hardware), glass package (double-pane Low-E with argon is the sensible baseline here), frame material, and whether the opening needs any structural or flashing repair. Every quote includes the wind-load rating written on the line item, not hidden in fine print. Call (682) 354-9300 to schedule a free, written estimate.
We Also Serve Cities Near Fort Worth
Our Window Replacement team serves Fort Worth and the surrounding metro. You’ll find us working in Fort Worth daily, and we regularly schedule installs and estimates in Haltom City, Keller, and Azle with the same live arrival tracking and written pricing. Same crews, same 365-Day Done Right Promise, same transparent process.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Fort Worth
Fort Worth’s building code requires replacement windows in wind-borne debris regions to meet a design pressure rating of DP 40 or higher, depending on the structure’s exposure category. Homes on open lots, elevated sites, or anything within a mile of open prairie may trigger a DP 50 calculation. The DP rating is stamped on the manufacturer’s test data, and the city’s windstorm inspection won’t pass without that paperwork. A compliant Fort Worth quote includes the DP rating for every window, not just a line saying “impact glass.” If your quote is missing that number, it’s not permit-ready. Call (682) 354-9300 and we’ll tell you exactly what your house needs.
Yes. Fort Worth’s building department accepts Florida Product Approval documents, including Miami-Dade NOAs, as evidence of impact and wind-load performance. This matters because PGT’s WinGuard series and several ES Windows lines carry Miami-Dade NOAs that exceed Fort Worth’s wind mitigation checklist. We recently replaced the original steel-casement windows on a 1962 ranch in Wedgwood after a spring hailstorm left the west-facing panes with a spiderweb of stress fractures and the aluminum frames bent along the jamb. Our crew installed PGT WinGuard impact-rated double-hungs with laminated glass interlayers and a Miami-Dade NOA that exceeded Fort Worth’s wind mitigation checklist; the homeowner’s windstorm insurer accepted the Florida Product Approval documents and dropped their premium by over 20 percent on renewal. The key is submitting the right documents with the permit application. We handle that paperwork. Call (682) 354-9300 to get the process started.
Often, yes. Fort Worth homeowners who install impact-rated windows with documented product approvals and a completed Certificate of Compliance can see windstorm premium reductions from 10 to 25 percent, depending on the carrier. The reduction depends on the window’s DP rating, the interlayer type, and whether the final windstorm inspection was filed with the city. Skipping that inspection leaves you without the certificate, and insurers use that missing form to deny hail-impact claims on replaced windows. We file the windstorm inspection paperwork as part of our Fort Worth window replacement jobs and hand you the compliance documents with your final invoice. For an exact number on your policy, call your agent, then call (682) 354-9300 for the windows that qualify.
Look for small pockmarks or divots in the glass, which catch light at an angle and appear as tiny craters on west-facing panes. Check aluminum or wood frames for dents along the jamb and muntins, especially on the storm-facing side. Interior signs include fogging between panes, which means the seal broke, and windows that suddenly stick or won’t lock because the frame warped. After any Fort Worth hailstorm, walk your exterior with a flashlight at dusk and inspect the glass obliquely. If you see cracks or pitting, call (682) 354-9300 for a free glass assessment with a written quote before the damage spreads.
Yes. You can replace the glass units in sound original wood sashes with Low-E insulated glass and comply with Fort Worth’s energy code, provided the replacement glass meets the required U-factor and solar heat gain coefficient for our climate zone. The wood frame and sash stay, preserving the Fairmount architectural character. The one caveat: if the sash is rotten or the frame is out of square, glass replacement won’t fix the air leaks and may not pass a pressure test. We’ll assess the sash condition during the estimate and tell you if glass-only is the honest route or if sash replacement makes more sense. Call (682) 354-9300 for a free assessment. Estimates are free, and every quote is written.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth and the surrounding metro.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.