New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Keller
Window installation in Keller usually runs $450 – $1,850 per opening depending on the window type, framing condition, and glass package, with most full-home projects landing between $8,000 and $22,000 before any rebates or insurance offsets. If you live in a 1980s brick veneer home around Bear Creek Park or a newer stone-accented build off Keller Hicks Road, you’re likely dealing with original aluminum frames and fogged seals that have been failing quietly for years. We serve Keller with written pricing before any work starts, live arrival times you can track, and crews who know exactly what hides behind the drywall in this city’s housing stock. Call (682) 354-9300 and we’ll get you a line-item quote.
Why Juniper Windows Fort Worth Is Keller’s Preferred Window Installation Company
We’re the windows-and-doors specialist inside the Relay Home Co. family, founded in 2001, and every Keller job runs on one non-negotiable rule: a written price before a single screw turns. No estimate that morphs into a surprise invoice at the door. No vague “we’ll see what we find.” Sean Mackey leads the team, and the standard he set is simple: inspection first, allowance written into the contract, and any change order priced and approved in writing before we touch the opening.
Keller homeowners call us because when they book, they get the Relay Standard: a tap-to-book experience, a live arrival time they can track from their phone, before-and-after photos of every opening, and a digital invoice they can pay from a link. Our background-checked, uniformed technicians show up on time and answer questions in plain language. U-factor, impact-rated, sightlines – we use the trade terms, then we explain what they mean for a Keller July.
Most of our Keller work comes through referrals from neighborhoods like Hidden Lakes, Marshall Ridge, and the older sections near Bear Creek Park. The reason is boring in the best way: we show up, we price honestly, and we stand behind it for 365 days, parts and labor, in writing. That’s the 365-Day Done Right Promise, and it covers every installation we complete in Keller.
Window Installers in Keller
Window installers in Keller spend a lot of time undoing thirty years of North Texas weather. The job involves pulling the old unit, inspecting the rough opening for rot and undersized framing, correcting any waterproofing failures at the jamb and sill, then setting and sealing the new window so it actually performs. A Keller homeowner needs us when seals fog, frames bend from hail, or the July cooling bill stops making sense. Basic single-hung replacement in a sound opening runs $450 – $800; a full-frame replacement with reframing runs $1,200 – $1,850.
What We Check Before Setting a Window
Every Keller opening gets inspected before any new unit goes in. We check the rough opening dimensions against the window spec, probe for rot at the sill and jamb, and verify the flashing and house wrap are still doing their job behind the brick veneer. If we find undersized framing, we write a change order with a fixed price before we cut anything.
When Replacement Becomes Reframing
In Keller’s 1980s builds, original windows were often set into openings framed for a specific, smaller unit size. When the old aluminum double-hung is too warped or the opening has rotted corners, setting a new window properly means reframing first. This is the single biggest reason a Keller window quote moves, and it’s why we price it transparently: you hear about it before work starts, not after the wall is open.
Casement Windows in Keller
Casement windows in Keller make sense for homes where wind-driven rain and hail are regular guests. They crank outward on a hinge, seal tight against the frame when closed, and offer the cleanest sightlines for a large picture view. In Keller’s older sections around Bear Creek Park, we’ve replaced dozens of failed double-hungs with PGT impact-rated casements, and the difference in both comfort and insurance paperwork is immediate. Expect $700 – $1,500 per casement depending on size, glass package, and whether the opening needs reframing.
Why Casements Beat Sliders in Keller’s Storm Season
A casement’s compression seal beats a slider’s brush seal every time the wind picks up. When hail hits a slider, the frame can flex and let water in around the track. A casement closes against a gasket, so wind-driven rain stays outside where it belongs. For Keller homes on exposed lots, that’s not a preference, it’s a repair avoided.
Impact-Rated Casements for Keller’s Hail Zone
Impact-rated glass is built to resist wind-borne debris without shattering. For a Keller home in a hail zone, that means a large chunk of ice can hit the window and you’re replacing a screen, not a pane. Homeowners in the older Bear Creek Park sections tell us their insurance carriers respond well to this upgrade, and we can document the install for any wind-mitigation credit you’re pursuing.
Trusted Brands We Service in Keller
We install and service eight product lines, so the right window for a Keller home is never a compromise. For Keller’s hail and high-wind reality, we lean on PGT for impact-rated casements and fixed windows, CGI for coastal-grade performance that shrugs off North Texas storms, and ECO Window Systems for energy-efficient vinyl that keeps cooling costs down. We stock local parts for these brands, which means faster turnaround when a seal fails or a sash needs replacing, and our techs know the product lines well enough to recommend the right glass package for a west-facing Keller wall versus a shaded north one.
Common Window Installation Problems We See in Keller Homes
- Fogged seals on original aluminum double-hungs. Keller’s 1980s homes near Bear Creek Park were built with single-pane aluminum windows whose seals give up after three decades of hundred-degree summers. Once the seal fails, the glass fogs permanently and the only fix is replacement.
- Failed waterproofing behind brick veneer. Keller’s brick and stone exteriors look solid, but when the original flashing at the sill and jamb fails, water gets behind the veneer and rots the framing. You won’t see it until the old window comes out, which is why our inspection-first process matters.
- Undersized or rotted framing around original openings. Keller’s 1980s builds often used the cheapest framing that passed code at the time. When we pull an old window, we regularly find studs too small for a modern unit or corners soft from years of slow water intrusion.
- Outdated wiring run through window rough openings. Keller homes from the 1980s and 1990s sometimes had electrical lines routed through or near window openings. Removing a window can disturb that wiring, and once the wall is open, the city’s permit process may require bringing it up to current code. We flag this during inspection and write any required electrical work into the change order before we proceed.
Pricing for Window Installation in Keller, TX
Here’s what window installation actually costs in Keller. A basic single-hung replacement in a sound opening runs $450 – $800. Casement windows run $700 – $1,500. Double-hungs run $500 – $1,100. Picture and fixed windows run $600 – $1,600 depending on glass package. Bay and bow windows run $2,500 – $6,000. Full-home projects in Keller typically land between $8,000 and $22,000, with the biggest variables being framing condition, glass package, and whether the opening needs reframing or waterproofing correction. Every Keller quote includes a written inspection summary and a line-item price before any work starts. Call (682) 354-9300 and we’ll schedule the walkthrough.
We Also Serve Cities Near Keller
Juniper Windows Fort Worth serves Keller and the surrounding area, including Window Installation in Keller neighbors in Haltom City, Fort Worth, and Azle. If you’re in one of those cities and want the same written-price process, schedule a visit. Our Window Installation team covers the whole metro with the same 365-Day Done Right Promise.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Keller
Yes, in most Keller homes a full window replacement triggers a permit, and once the opening is inspected, any code deficiencies found must be corrected before the new unit is set. That can include undersized framing, failed waterproofing, or outdated electrical wiring in the rough opening. We inspect everything and write any required code upgrades into the change order before we start, so the final number is approved in writing, not sprung on you mid-project. Call (682) 354-9300 to schedule an inspection and get a written quote.
Impact-rated glazing means the glass is built with a laminated interlayer that holds the pane together when hail or wind-borne debris hits it, instead of shattering into the house. For a Keller home, this means a hailstorm that would crack ordinary glass leaves your impact-rated window intact, or with cosmetic damage only. It also qualifies many homeowners for insurance credits, which we can document. Call (682) 354-9300 and we’ll walk through which openings matter most for your policy.
Because Keller’s 1980s and 1990s brick veneer homes were often built with minimal flashing at the window sill and jamb, and after thirty years of North Texas rain and humidity, water found its way behind the brick. The framing rots slowly, hidden from view, until the old window is pulled and the damage is exposed. That’s why we inspect every opening before pricing the replacement, so you hear about rotted framing as a written change order, not as a surprise once the wall is open. Schedule your free estimate at (682) 354-9300.
Yes, replacing single-pane aluminum with Low-E insulated glass typically cuts the solar heat gain through your windows by 40 to 55 percent, which directly reduces cooling load during Keller’s hot, humid summers. Single-pane aluminum frames also conduct heat poorly, so the frame itself is a thermal leak. New Low-E units with insulated frames lower the U-factor significantly, meaning less heat enters the house and your AC runs less. The exact savings depend on your home’s orientation and shade, but the physics is consistent. Call (682) 354-9300 for an assessment of which windows are costing you the most.
In many Keller cases, yes, impact-rated windows on every opening qualify the home for a windstorm or hail mitigation discount on your homeowner’s policy, but the exact credit depends on your carrier and policy terms. We provide documentation of the install, including the product spec and impact rating, which is what most carriers require to apply the credit. Juliper is a hardy evergreen built to handle sun, wind, and cold, which is a fitting standard for what your windows have to endure in Keller. Call (682) 354-9300 and we’ll help you gather the paperwork your insurer needs.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Keller and the surrounding area with written pricing and the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.