New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in Fort Worth, TX | Juniper Windows Fort Worth
CGI windows and doors service in Fort Worth means diagnosing how two decades of North Texas sun, hail, and humidity work against aluminum and vinyl frames, then fixing it without selling you a replacement you don’t need. Juniper Windows Fort Worth runs independent CGI repair and replacement crews across the city, and we are not manufacturer-affiliated or factory-authorized. That independence matters: we recommend what the window actually needs, not what a brand rep says to sell. Call (682) 354-9300 for a free estimate on any CGI window, door, or impact unit in Fort Worth.
Why Fort Worth Residents Choose Us for CGI Service
We know CGI model lines the way a mechanic knows a particular engine family. Sean Mackey, our owner, learned the trade at Los Angeles Trade-Technical College and has spent nearly two decades on job sites since. He’ll tell you straight: CGI builds a solid frame, but after years of hail and triple-digit afternoons, the balance springs and weep channels need attention. Our crews install and service CGI every week across Fort Worth, from single-window swaps in Fairmount to full door and window packages in newer Tarrant County builds.
We stock factory CGI replacement parts where regional distributors still carry them: sash balances, latches, weatherstripping, roller assemblies. For discontinued hardware, we source tested aftermarket equivalents that match the original profile. Every job gets a written price before work starts, and our 365-Day Done Right Promise covers parts and labor for a full year after installation.
Our CGI sales & service work is grounded in one habit: we order the parts, inspect the frame, and only then tell you whether repair or full replacement makes sense.
Common CGI Windows & Doors Problems We Solve in Fort Worth
- Drifting sashes from failed balance springs. CGI 9700 Series single hungs older than 12 years often lose tension in the balance springs. The sash slides down on its own. It’s worse in Fort Worth because constant AC cycling keeps the temperature difference between indoors and outdoors high, which works the springs harder than the factory ever expected.
- Weep-hole clogging and corner seal debonding on horizontal rollers. Older CGI 9400 Series frames collect dust and clay from our dry springs. After a hailstorm, water sits in the track instead of draining, and the corner seals start to let go. You’ll see internal staining on the frame edges.
- Loose glass in picture windows from glazing channel shrinkage. CGI Estate 1000 Series fixed windows sit in direct sun for hours. Repeated 100-degree-plus afternoons shrink the glazing channel bit by bit, and the glass starts to rattle or shift. That looseness also lets air leak past the seal.
- Warped sills on west-facing CGI entry doors. In neighborhoods like Wedgwood and Ridglea, the afternoon sun hits dark-painted door frames hard. The thermal expansion exceeds what the factory aluminum profile can handle. The sill warps, the sweep stops sealing, and you feel a draft at your ankles.
- Bent interlocks and shattered glazing beads after hail. Hailstones crack the plastic glazing beads and bend the aluminum interlock channels. The window still opens, but the seal is gone, and the damage spreads. This is the most common call we get in May and June.
CGI Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth sits in a hail-belt corridor rated 4 to 5 out of 10 on the risk scale by the Insurance Institute for Business & Home Safety. Dallas, just to the east, drops to a 3. That difference is everything for CGI window owners here. West-facing CGI frames take repeated direct ice impacts that bend interlocks and shatter glazing beads in ways you simply don’t see as often thirty miles down I-30. Our tech pulled an original CGI 9400 Series horizontal roller from a 1980s ranch in Wedgwood after a spring storm. The aluminum track was dented by hail and the weep channels were packed with clay dust, so the panel would no longer lift out for cleaning. We installed a new 9400 frame with an impact-rated roller panel, redrilled the weeps to the next size, and recaulked the exterior fin with elastomeric sealant, matching the faded ivory finish on the other windows. That kind of repair only makes sense if you know the climate you’re working in.
Fort Worth’s housing stock spans a century of construction styles. The Fairmount bungalows from the early 1900s, the huge ranch-home tracts from the 1950s through 1970s, and the newer suburban developments all carry different CGI model generations. A 9700 Series single hung on a 1998 home in Wedgwood behaves very differently from the same model installed in a 2015 build near Alliance. We adjust our repair approach accordingly.
CGI Models & Products We Service in Fort Worth
Our Fort Worth crews work on the full range of CGI residential lines: the 9700 Series aluminum single hung, common on 1990s and 2000s homes; the 1500 Series vinyl single hung, popular in newer construction and replacement projects; the 9400 Series horizontal roller, a staple of mid-century ranch homes; and the Estate 1000 Series aluminum picture and fixed windows, often paired with operating units in larger openings. We carry factory-balance springs, latches, and weatherstripping for these lines locally, which cuts turnaround time for Fort Worth repairs.
For impact-resistant upgrades, we install full-frame replacements with CGI impact glass where the frame still makes sense, or we recommend Fort Worth Window Replacement when the frame is too far gone. We’re honest about that math: if the sash and glazing are compromised but the frame is intact, a full-frame replacement is often cheaper than chasing repeat seal failures in a Fort Worth hail zone.
CGI Service Pricing in Fort Worth
What you’ll pay depends on the repair type and the frame condition. Here’s what we see most often in Fort Worth:
- Balance spring replacement on a CGI 9700 Series single hung: $140 to $280 per window, depending on spring type and access.
- Weep-hole cleaning and corner seal recaulk on a 9400 Series roller: $120 to $240 per unit.
- Glazing channel repair and glass reset on an Estate 1000 Series fixed window: $180 to $420, depending on glass size and whether re-glazing is required.
- Full-frame replacement for a CGI 1500 Series single hung: $520 to $980 per window installed, including tear-out, new frame, sash, and exterior trim seal.
These ranges reflect what we regularly quote across Fort Worth. The final number depends on window size, frame condition, and whether we’re doing one window or a full elevation. Every estimate is written and itemized before any work starts. Call (682) 354-9300 and we’ll measure, inspect, and give you a number you can hold us to.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in Fort Worth
How much does it cost to replace a full-frame CGI 1500 Series single hung in Fort Worth?
A full-frame replacement for a CGI 1500 Series single hung typically runs $520 to $980 per window for our Window Installation in Fort Worth, with the range driven by opening size, exterior finish, and whether we’re replacing one unit or several. Call (682) 354-9300 for an exact written quote. Estimates are free.
Why did the spring balance on my CGI 9700 Series fail after only ten years in Fort Worth?
Constant AC cycling keeps the indoor-outdoor temperature differential high for months at a time in Fort Worth. That thermal cycling works the balance springs harder than the factory’s design life assumes, so failures at ten to twelve years are common here. We replace them with factory CGI parts when stocked, or tested equivalents when the exact model is discontinued.
Can you install CGI impact windows in a Fairmount historic bungalow without changing the exterior appearance?
Yes. We can install impact-rated CGI units with the same sightlines and exterior finish profiles as the original wood or aluminum windows, provided the opening dimensions work. Fairmount has specific exterior requirements, so we always check the current standards before we quote. Call (682) 354-9300 and we’ll walk through the options for your specific house.
Do you ever repair a CGI horizontal roller track instead of replacing the whole window?
We do. When the aluminum track is dented or the weep channels are clogged, we can often redrill the weeps, straighten the track, and replace the roller assembly. If the corner seals have debonded, we recaulk with elastomeric sealant. We only recommend full window replacement when the frame itself is cracked, severely warped, or rotted.
What causes condensation between the panes of my CGI Estate 1000 Series fixed window?
The glazing seal around the insulated glass unit has lost integrity. Moisture gets in, and once it’s between the panes, it cannot be cleaned out. The fix is replacing the glass unit and resealing the frame. In Fort Worth, where summer humidity meets constant air conditioning, failed seals show up faster than in drier climates.
Service Areas Near Fort Worth
Juniper Windows Fort Worth serves the entire Fort Worth metro, plus the surrounding communities. We’re regularly in Saginaw, Haltom City, Keller, Azle, and White Settlement. For CGI service in Saginaw or CGI service in Haltom City, check those pages for specific details. Our full Fort Worth service area page covers the neighborhoods we work in every week.
Book Your CGI Service in Fort Worth Today
If you have a CGI window that won’t stay up, a door that won’t seal, or hail damage on a west-facing frame, call us. Sean Mackey and the Juniper Windows Fort Worth crew will inspect it, quote you in writing, and get the work done. Call (682) 354-9300 to schedule your free estimate.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth for years.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.