New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Everman
Window replacement in Everman costs $550 to $1,400 per window for vinyl insert replacements and $800 to $2,100 per opening for full-frame replacements, with most mid-century brick ranch jobs landing between $4,800 and $14,000 total. The price gap comes down to what’s behind the wall once we open it: original 1950s steel casement frames, rotted rough openings, and permit-triggered code upgrades that most contractors don’t mention until the change order shows up. We handle it differently. Every Everman replacement contract we write includes inspection findings and code-compliance allowances before the first window comes out, so the number on your written quote is the number you pay.
Call (682) 354-9300 to schedule your free estimate. A real person answers, 24/7.
Why Juniper Windows Fort Worth Is Everman’s Preferred Window Replacement Company
Everman homeowners keep calling us back because we treat a 60-year-old brick ranch differently than a new build. The age of the house matters. We know that a 1958 house on the streets around Johnson Park has different framing, different flashing details, and different code requirements than a 2005 home in Fort Worth. That local knowledge means our quotes don’t balloon after demolition starts, and our crews don’t look surprised when they find rusted steel casement anchors behind the trim.
Our Window Replacement team has worked on hundreds of mid-century homes across Everman’s neighborhoods from Enon Avenue to the blocks off W. Enon and north toward Saginaw. We know the specific ways hail eats aluminum frames starting at the weep holes, how east- and west-facing rooms with original single-pane glass turn into ovens by mid-afternoon in July, and which window styles match the original detailing on a 1960s brick ranch without making it look like a patch job. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, but crews serve Everman locally.
Led by Sean Mackey, Juniper Windows Fort Worth puts every Everman job under the 365-Day Done Right Promise: parts and labor covered for a full year after installation, in writing. If something isn’t right, we come back and make it right, no charge, no argument. That promise is why Everman homeowners who replace one window with us end up calling back when it’s time to do the other twelve.
- Written price before any work starts. Not an estimate, not a range, a line-item number.
- Background-checked, uniformed technicians on every Everman job, every time.
- Live phone answered 24/7 by a real person. No voicemail maze.
- The Relay Visibility Guarantee: live arrival time you can track, before-and-after photos, and a digital invoice you can pay from a link.
Window Replacement Company in Everman
When Everman homeowners search for a Window Replacement Company, they’re usually dealing with one of three things: a fogged insulated glass unit, a steel casement window that’s rusted shut, or an air leak that whistles every time a North Texas storm rolls through. Our work covers all three. We remove the old unit, inspect the rough opening, repair or replace any damaged framing, install the new window to the manufacturer’s specification, and seal everything against Everman’s heat, humidity, and hail. A typical full-frame replacement in Everman runs $800 to $2,100 per opening. Insert replacements, where the existing frame is still sound, run $550 to $1,400 per window.
Full Frame Replacement
Full frame means everything comes out: sash, frame, trim, and the old anchors. On Everman’s 1950s and 60s brick ranches, this is where we find the real story. Water-stained jambs from failed weep holes, rusted steel anchor clips, and framing that’s drifted out of square over six decades. We rebuild the opening properly, flash it for North Texas wind-driven rain, and set the new window in square and plumb. This is the right call when the original frame is compromised or the homeowner wants to change the window size or style.
Insert Window Replacement
Inserts work when the existing frame is still solid and square, which is more common in Everman’s brick homes than people expect. The old sash and hardware come out, the new unit fits inside the original frame, and we seal the perimeter. This keeps the original exterior trim intact, which matters on a mid-century brick ranch where matching that original look is part of the home’s character. Inserts run $550 to $1,400 per window and go in faster than a full-frame job.
Window Glass Replacement in Everman
Window Glass Replacement in Everman typically runs $180 to $575 per pane when the frame and sash are still in good condition but the glass unit itself is fogged, cracked, or hail-damaged. This is the fix for a failed insulated glass unit, a rock from a mower, or a storm that put a stress crack through a single-pane steel casement. We remove the old glazing, set a new glass unit cut to spec, and reseal. Done correctly, a glass replacement restores clarity and thermal performance without touching the frame, and the entire job is usually completed the same day we walk through the door.
Single-Pane to Insulated Glass
Everman’s original steel casements often have single-pane glass that was state-of-the-art in 1958 and is essentially useless today, especially on east- and west-facing walls in July. Where the steel frame is still serviceable, we can upgrade just the glass to insulated, low-E units. That single change cuts radiant heat gain through the glass by a significant margin and stops the cold draft that come through these old panes every winter.
Fogged Insulated Glass Units
Hail starts at the weep holes of original aluminum frames in Everman, splintering the sash and cracking the seal on insulated glass units before most homeowners even notice a problem. Once the seal fails, argon leaks out, moisture gets in, and that permanent fog appears between the panes. The only real fix is replacing the glass unit itself. We match the new unit’s U-factor and tint to the existing windows so the repair doesn’t stand out.
Trusted Brands We Service in Everman
Juniper Windows Fort Worth carries eight product lines, and for Everman’s storm-prone, heat-heavy climate, we recommend and service PGT, CGI, and ES Windows for impact-rated replacements. PGT’s WinGuard line carries a Miami-Dade NOA, the benchmark for wind-borne debris resistance, and it’s what we installed on that 1958 brick ranch near Johnson Park where the original steel casements had all but given up. We stock local parts for Everman customers, so replacement glass, hardware, and weatherstripping for these brands don’t require a two-week waiting game. That means faster turnaround when you need a single window repaired before the next hailstorm hits.
Common Window Replacement Problems We See in Everman Homes
- Rusted steel casement frames seize shut. After decades of Everman humidity and storm-driven rain, the original steel frames on 1950s and 60s homes rust at the hinges and locks, making emergency egress impossible in some rooms. A seized casement isn’t an inconvenience, it’s a fire-safety problem, and replacement is usually the only real fix.
- Original aluminum windows without low-E glass turn rooms into ovens. East- and west-facing rooms in older Everman homes catch direct sun through single-pane aluminum windows, and by 3 p.m. in July the difference between a replacement low-E unit and the original glass can mean 20-30% higher cooling bills.
- Hail damage starts at the weep holes. Aluminum frames from the 1960s and 70s are especially vulnerable at the weep holes, where hail splinters the sash and lets water into the frame channel. Homeowners often don’t notice until the insulated glass unit fogs or the window won’t open.
- Failed waterproofing around original steel casement anchors. The original caulking and flashing on a 60-year-old brick ranch has long since dried out, and wind-driven rain from North Texas storms works its way into the rough opening. By the time you see water-stained jambs or peeling paint below the window, the rough framing is already damaged.
Pricing for Window Replacement in Everman, TX
Here’s what replacement actually costs in Everman’s market, delivered straight. Vinyl insert windows run $550 to $1,400 per opening. Full-frame replacements run $800 to $2,100 per opening. Window glass replacement alone runs $180 to $575 per pane. A whole-house job on a typical three-bedroom Everman brick ranch, call it eight to twelve windows, lands between $4,800 and $14,000 for inserts and $6,400 to $25,000 for full-frame work with impact-rated glass. What moves the price: the condition of the rough opening, whether code upgrades are triggered once the wall is open, the glass package you choose, and whether the project is full-frame or insert. We write every price down before work starts, code allowances included, so the quote doesn’t move after demolition. Call (682) 354-9300 for an exact quote on your windows. Estimates are free.
We Also Serve Cities Near Everman
Our window replacement teams work across the cities surrounding Everman, including Fort Worth, Saginaw, Haltom City, and Keller. If your home sits right on the line between Everman and one of these neighboring communities, we can still help, and the same written-price guarantee and 365-Day Done Right Promise apply wherever your project lands.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Everman
Everman’s original housing stock was built with single-pane steel casement and aluminum windows that were never designed for 60-plus years of North Texas thunderstorms, hail, and 100-degree summers. The steel frames rust at the hinges and weep holes, the aluminum frames lack low-E glass, and the original waterproofing around the rough openings has failed. We see the same failure modes in house after house across Everman’s mid-century neighborhoods, and the age of the home is the single biggest predictor of what we’ll find behind the trim. Call (682) 354-9300 to have your windows inspected and priced.
We write inspection findings and code-compliance allowances directly into every Everman replacement contract before any work starts. That’s the single biggest difference between us and a contractor who quotes low and hands you a change order once the wall is open. When we open an Everman exterior wall on a 1950s or 60s home, the permit process can trigger upgrades for egress, tempered glass, flashing details, and anchors that weren’t required when the house was built. We plan for those costs up front, put them in writing, and if we find something unexpected, we price it and get your approval on a written change order before we touch it. Call (682) 354-9300 and we’ll walk you through the permit path on your home.
Yes, and the effect is most noticeable on east- and west-facing rooms. Original single-pane aluminum windows in Everman homes let direct July sun pour into the living room from mid-afternoon until sunset, and air conditioners fight that heat load every day. Impact-rated windows with low-E glass, like the PGT WinGuard units we install, reflect a large portion of that solar gain before it ever enters the room. Homeowners who replace their worst-facing windows first typically notice the difference in comfort within days, and the cooling-bill reduction shows up on the next electric bill. Call (682) 354-9300 for a free estimate on the windows that matter most in your house.
For most Everman homes, we recommend windows rated for wind-borne debris impact, which is the Miami-Dade NOA standard carried by PGT’s impact-rated lines. Everman sits in a hail and severe-thunderstorm corridor, and while the city is not directly on the coast, the wind loads and hail risk common to North Texas storms make impact-rated glass a practical upgrade, not a luxury. The exact rating your home needs depends on your specific location and the age of the existing opening, and we can verify that during the free estimate. Call (682) 354-9300 to talk through the options for your home.
Hail damage on Everman windows almost always shows up first at the weep holes of original aluminum frames, where the metal is thinnest and the sash splinters under impact. The damage starts there, then spreads to the frame channel, and eventually the seal on the insulated glass unit fails and the window fogs. By the time a homeowner notices the fogged glass, the frame damage has usually been present for months or years. We check weep holes and frame corners during every Everman inspection, because that’s where the next problem starts. Call (682) 354-9300 to schedule a hail-damage inspection on your windows.
Contact Juniper Windows Fort Worth for Window Replacement in Everman
If you live in Everman and your original steel casements are rusted shut, your aluminum frames are hail-splintered at the weep holes, or your east-facing living room turns into an oven every July afternoon, we’ll give you a written price before any work starts. That includes inspection findings and code-compliance allowances, so the number doesn’t move after demolition. Call (682) 354-9300 now to schedule your free estimate, or reach out any time day or night. A live person answers, 24/7, and we’ll have a technician to your Everman home with a written quote in hand.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Everman and the surrounding DFW area.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.