New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Door Replacement for Fort Worth Homeowners
Our Door Replacement in Fort Worth typically runs $850 to $3,400 for a standard entry door installed, with premium impact-rated or custom units landing between $4,000 and $8,000. That’s the honest range we quote from before we ever step foot on your property. Sean Mackey and the Juniper Windows Fort Worth team have handled everything from single door swaps in Ryan Place to full exterior door packages in Walsh Ranch, and we put every price in writing before a single screw turns. Call (682) 354-9300 for a free estimate.
Fort Worth doors take a beating. The clay soil shifts, the summer sun bakes western exposures, and spring hail season doesn’t do anyone’s threshold any favors. When a door starts sticking, leaking air, or looking like it gave up, you want a crew that answers the phone live, shows up when they say they will, and backs the work for a full year. That’s the Juniper Windows & Doors standard.
Door Frame Repair
Door frame repair addresses the structural casing around your door: the jambs, the threshold, the brickmold, and the framing that keeps everything square and sealed. You need it when a door drags against the frame, when light or water creeps in around the edges, or when the frame itself shows rot or cracks. Juniper Windows Fort Worth starts door frame repair at $175 for minor adjustments and runs up to $900 when sections of the jamb or threshold need full replacement.
Rot and Weather Damage
North Texas, including our Door Replacement in Azle service area, doesn’t get snow like the Midwest, but it does get torrential spring downpours and relentless humidity that finds its way into untreated framing. We regularly see frame rot on older Fort Worth homes where builders skipped flashing or used unsealed pine. We cut out the bad wood, treat the surrounding area, and rebuild with rot-resistant material so you’re not back here in two years.
Frames That Shift Out of Square
Expansive clay soil under Fort Worth moves more than most homeowners realize, and your door frame is usually the first thing that complains. A shifted frame causes the latch to miss the strike plate, gaps to open at the top or bottom, and air leaks that spike your electric bill. We re-shim, re-square, and re-secure the frame so the door closes the way it did on day one.
Interior Door Replacement
Interior door replacement swaps out the doors inside your home: bedroom doors, bathroom doors, closet doors, pantry doors. You’re a candidate when doors are cracked, warped, covered in layers of landlord-grade paint, or just dated beyond what a coat of paint can fix. Juniper Windows Fort Worth replaces standard interior doors for $140 to $300 per door, including hardware and a clean installation, with solid-core upgrades and custom sizes running higher.
Standard Molded Panel Doors
Most Door Replacement - Keller and Fort Worth homes built in the last 30 years came with hollow-core molded doors that sound like a drum and dent if you look at them wrong. We swap those for solid-core or MDF panel doors that close with a satisfying thud and actually block sound between rooms. The price difference is smaller than most people expect, and the upgrade is immediate the first time you shut a bedroom door during a movie.
Closet and Specialty Sizes
Older ranches in Wedgwood and Ridglea Hills, not far from Door Replacement in Haltom City territory, often have closet doors in odd sizes that big-box stores won’t touch as a special order. We measure, source, and hang doors in non-standard widths without charging you a “custom” premium that doubles the bill. Bifold, bypass, or swinging, we get the track and the fit right the first time.
Interior Door Installation
Interior door installation is the full process of fitting a new door into an existing opening: measuring the rough opening, hanging the slab, setting the hinges, drilling for hardware, and adjusting until the reveal is even on all sides. You need professional installation when a door binds, when the gap around the edge is uneven, or when you’ve bought a new door and discovered the hinges don’t line up. Juniper Windows Fort Worth charges $110 to $230 per door for installation labor, depending on the complexity of the opening.
Pre-Hung vs. Slab Installation
A pre-hung door comes mounted in its own frame and installs quickly when the rough opening is clean. A slab door goes into your existing frame and takes more skill to get the hinges and strike plate aligned. We’ll tell you which one your opening actually needs, and the written quote reflects that choice before we ever start cutting.
Hardware and Hinge Alignment
A door that sags or won’t latch is rarely a door problem, it’s a hinge problem. We mortise new hinges, replace stripped screw holes with proper anchors, and set the latch so it engages without slamming. The little details here are what separate a door that feels new from one that just looks new.
Door Installers
Door installers are the people who show up, remove your old door, prep the opening, hang the new one, and make sure it seals and swings properly. The difference between a good installer and a bad one shows up a year later in air leaks, sticking, and a door that suddenly won’t latch. Juniper Windows Fort Worth sends background-checked, uniformed installers to every job in Fort Worth, and every one of them works off a written scope and price.
Background-Checked and Uniformed
You know exactly who is walking through your door before they ring the bell. Our installers are employees, not a revolving cast of day-labor subs, and they show up in Juniper gear with the tools and materials for your specific job on the truck. If anything changes on-site, you hear about it before it happens, not after.
Experienced With Fort Worth Construction
Fort Worth homes run the gamut from 1920s bungalows with original framing to new construction off Chisholm Trail Parkway with tight tolerances and builder-grade everything. Our installers have worked in all of it and know how to handle lead paint requirements, out-of-square openings, and the occasional surprise behind the trim. No change orders, no blank stares.
Door Contractors
Door contractors are the licensed professionals you hire to manage the entire door project: measuring, product selection, permitting when required, installation, and cleanup. You need a contractor when the job goes beyond a simple swap, like an exterior door that involves structural work, or a multi-door project where consistency matters across every opening. Juniper Windows Fort Worth operates as your door contractor from first measurement to final walkthrough, with a written price locked before work begins.
Fixed Pricing, No Door-Day Surprises
The classic contractor move is quoting a door job low and “discovering” problems once the old door comes off. We don’t play that game. The price we put in writing is the price you pay, unless you decide to change the scope yourself. Every Juniper job includes the 365-Day Done Right Promise: parts and labor covered for a full year, in writing.
Permits and Compliance Handled
Fort Worth requires permits for exterior door replacements that alter the opening or involve structural framing changes. We know when a permit is required and when it isn’t, and we pull them when the job demands it. Our inspections pass because we build to code the first time, not because we got lucky.
Brands We Service
We install and service doors from PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. If you have a Therma-Tru entry system that’s seen better days, we know its hinge points, its weatherstripping profiles, and its common failure modes because we’ve replaced and repaired dozens of them across Fort Worth. We also work extensively with PGT and ViewLux impact-rated doors, which matters when you live in a hail corridor that tests your exterior every spring.
CGI and CWS doors show up often in Fort Worth homes that were upgraded after a storm claim, and we know their installation requirements inside and out. Whether you have one of those brands or something else entirely, we can source the right door for the opening, the climate, and your budget. We don’t steer you toward one brand because it’s easier for us; we tell you what actually fits your home.
Signs You Need a Pro Right Now
- You can see daylight around the door edge. If light passes through, so does air, water, and your HVAC budget. A door that doesn’t seal is costing you money every month and inviting pests. This is usually a frame or weatherstripping fix, but it needs to happen before the next storm.
- The door sticks or drags when you open it. A door that scrapes the floor or jamb is telling you the frame has shifted or the hinges are failing. Ignoring it just makes the damage worse and the eventual repair more expensive. Fort Worth’s clay soil makes this one of the most common calls we get.
- The lock doesn’t engage fully. When the latch won’t seat in the strike plate, your home’s security is compromised even if the door looks closed. This can be a simple alignment fix or a sign the frame is out of square. Either way, it needs a pro with the right tools to diagnose.
- You feel a draft standing near the door. That’s not a quirk of an old house, that’s a failed seal or worn weatherstripping. Drafts drive up cooling costs in a Fort Worth summer and make rooms uncomfortable in winter. The fix is usually measured in hundreds, not thousands, if you catch it early.
- Visible rot, cracks, or water stains on the frame. Once water gets into the framing, the clock is ticking. Rot spreads behind the trim and compromises the structure holding your door. We see this most often on older homes in Fairmount and Mistletoe Heights where original wood frames were never properly flashed.
Our Process, Step by Step
- 1
Free Estimate and Measurement. We come out, take precise opening measurements, and walk you through options that fit your budget and your home’s style. You get a written price before we leave, not a “we’ll email you something” promise. The number on that sheet is the number you pay.
- 2
Product Selection and Order. We help you choose the door, glass package, and hardware that make sense for your opening and your exposure. We order from our eight product lines with accurate lead times, and we don’t pad the schedule just to make ourselves look busy.
- 3
Installation Day. Our background-checked crew shows up on schedule, protects your floors and surrounding trim, and removes the old door carefully. We prep the opening, correct any framing issues that fall within the quoted scope, and hang the new door with precise reveals and a proper seal.
- 4
Weatherproofing and Trim. Exterior doors get flashed, sealed, and trimmed out so water has no path inside. Interior doors get hinge alignment, hardware adjustment, and a clean finish. We don’t caulk over problems and call it done; we fix the problem, then caulk.
- 5
Walkthrough and Documentation. Before we leave, we walk the job with you, show you how everything operates, and document the work with photos. Your invoice comes via digital link, and your 365-Day Done Right Promise is in writing. If anything isn’t right, you call, and we come back. No charge, no argument.
How Much Does Door Replacement Cost in Fort Worth?
A standard exterior door replacement in Fort Worth runs $850 to $1,800 for a basic steel or fiberglass unit installed. Mid-range fiberglass doors with decorative glass and better hardware range from $1,800 to $3,400. Impact-rated doors, custom wood doors, and projects involving frame work or stucco or brick modification land between $4,000 and $8,000. Interior doors are more predictable: $140 to $300 per door for standard replacement, $110 to $230 per door for installation labor when you already own the door.
What moves the price? The door material itself is the biggest driver, followed by any glass options, the condition of the existing frame, and whether the opening requires structural work. Fort Worth homes built on expansive soils often have frames that need more attention than the door itself, which is why a cheap “door-only” quote can turn into a surprise bill. We include frame assessment in every free estimate, and we write the final number down before you approve anything.
How do you avoid overpaying? Get a written quote that separates materials, labor, and any frame work line by line. If a contractor won’t put the price in writing, walk away. Our estimates include everything: the door, hardware, labor, cleanup, and haul-away of the old door. Call (682) 354-9300 to schedule yours.
Our Service Area Near Fort Worth
We’re based in Fort Worth and cover the surrounding areas including Door Replacement in Fort Worth, Door Replacement in Saginaw, Door Replacement in Haltom City, Keller, Azle, White Settlement, River Oaks, Rendon, Lake Worth, Sansom Park, Richland Hills, and Forest Hill. Most of these areas are a 20 to 35 minute drive from our crew, and we schedule precisely so you’re not waiting around all day. A live person answers the phone 24/7, so you can book in a tap and get a real arrival time you can track.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Replacement in Fort Worth
Door replacement is the process of removing an existing door and installing a new one in the same opening. It can include a straight swap, a pre-hung unit, or a full frame and threshold rebuild depending on the condition of the opening. In Fort Worth, we handle exterior, interior, and storm door replacements for every style of home. The goal is a door that opens, closes, locks, and seals properly from day one.
Most single door replacements take one day from arrival to cleanup. Multi-door projects can take two to three days depending on how many openings and whether any framing needs attention. We give you a specific timeframe in your written quote before we start, so there are no “we’ll be done when we’re done” answers. Call (682) 354-9300 to schedule a free estimate and get a realistic timeline for your specific doors.
Exterior door replacement in Fort Worth typically runs $850 to $3,400 for standard units, with impact-rated or custom doors landing between $4,000 and $8,000. Interior door replacement runs $140 to $300 per door, and door frame repair starts at $175. Every Juniper quote is a written, line-item price before any work starts, so you’ll never see a surprise charge on your invoice.
Yes, we install and service Therma-Tru doors throughout Fort Worth. We know their weather-sealing profiles, hinge systems, and common wear points from years of working with their product line. Whether you need a new Therma-Tru entry system or repairs to an existing one, we can source parts and get the job done right. We also work with PGT, ViewLux, CGI, and the rest of our eight product lines.
If a door is damaged, won’t secure, or has been kicked in, we prioritize those calls. Our live phone line is answered 24/7 by a real person, not an answering service, and we’ll get someone out to secure your home as quickly as possible. For genuine emergencies, we’ll tell you exactly when to expect us. Call (682) 354-9300 and describe the situation.
Every Juniper Windows Fort Worth installation is covered by the 365-Day Done Right Promise: parts and labor for a full year, in writing. If the work isn’t right, we make it right, and if a repair fails within that year, the second visit is free. Manufacturer warranties on the door itself vary by brand and product line, and we’ll explain what applies to your specific door before you buy.
Clear the area around the door inside and out, move any furniture or decor within four feet of the opening, and make sure we can access both sides without obstacles. If you have pets, keep them in a separate room for their safety and ours during the installation. We handle the old-door haul-away and cleanup, so you don’t need to worry about debris. Everything else, we bring.
Schedule Your Door Replacement Service in Fort Worth Today
Ready for a door that actually fits, seals, and looks like it belongs on your home? Call (682) 354-9300 to schedule your free estimate. You’ll get a written price before anything starts, a live arrival time you can track, and a full year of coverage under the 365-Day Done Right Promise. A real person answers 24/7, so call now.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.