Door Replacement in Fort Worth - Free Measure, Exact Written Quote

Fast, Reliable Door Replacement Across Fort Worth

A typical exterior door replacement in Fort Worth runs $1,100 – $4,200 for a standard single entry, while double doors and custom fiberglass units on acreage properties can reach $6,000 – $9,500. Those are the numbers we quote from the first phone call, and they don’t change once the work starts. Fort Worth homeowners call us because they want a real price, a live arrival time, and a crew that knows the difference between a Fairmount bungalow jamb and a ranch home out near Aledo ISD. We’re Juniper Windows Fort Worth, and door replacement here is what we do. Call (682) 354-9300 for a free estimate on anything from a front entry to a detached shop door.

Our Fort Worth crews coordinate from the Dallas-Fort Worth office and dispatch locally across the whole city. We serve everything from the Near Southside to the far western county line, and we know which addresses fall under City of Fort Worth review versus Tarrant County permitting. That matters more than most people realize.

Why Juniper Windows Fort Worth Is Fort Worth’s Preferred Door Replacement Company

Founded in 2001 as part of the Relay Home Co. family, Juniper Windows & Doors has spent two decades learning what North Texas weather does to an exterior door. Every project gets a written price before any work begins, and every install carries the 365-Day Done Right Promise: if it’s not right, we make it right for a full year, parts and labor, in writing. That’s not marketing language. It’s the standard we set for every door we hang in Fort Worth.

Sean Mackey leads our Fort Worth team, and the people who show up at your door are background-checked, uniformed Juniper technicians. You know exactly who is walking up the driveway. We answer the phone 24/7 with a live person, not a voicemail maze. We stock product lines including Therma-Tru, PGT, and ViewLux, and we show up with before-and-after photos and a digital invoice you can pay from a link. Fort Worth homeowners deal with enough surprises. A door quote shouldn’t be one of them.

Door Contractors in Fort Worth

Door Contractors in Fort Worth do more than swap a slab, especially when the address sits on acreage or inside an unincorporated pocket of Tarrant County. The job starts with measuring the rough opening, checking the condition of the jamb and subfloor, and confirming whether the opening is plumb or has settled out of square, which happens constantly in Fort Worth’s clay soil. From there, a full tear-out and reinstall usually takes one day for a single entry on a city lot, and two to three days when the home is a ranch on a gravel drive with a detached shop involved. A licensed contractor in Fort Worth runs $1,200 – $3,800 for a standard single door replacement including the unit, and closer to $4,500 – $8,000 when reframing is needed.

Full Tear-Outs and Openings

When the old jamb is rotted at the bottom or the rough opening has shifted, pulling everything to the studs is the only way to hang a door that closes without dragging. On older Fort Worth homes built before 1960, we often find no flashing behind the original jamb, just raw wood against brick. That’s a water problem waiting to happen. We reframe, flash, level, and set the new unit so the reveal is even from threshold to head.

Replacing Shop and ADU Doors

Acreage properties in Fort Worth often have a detached shop, barn, or ADU with a side door that hasn’t been square since the Ford administration. These openings usually need jamb replacement plus re-shimming to get the latch to engage. We scope the access path before quoting, because hauling a pre-hung Therma-Tru down a rutted gravel drive requires different equipment than a standard delivery to a Fairmount curb cut.

Door Frame Repair in Fort Worth

Door Frame Repair in Fort Worth typically costs $350 – $900 when the jamb is salvageable and only the bottom section or latch side needs replacement. The big variable is whether the existing jamb can be sistered and re-shimmed or must be pulled entirely. In older Fort Worth construction, door frames were often set directly against the masonry with no insulation and no moisture barrier, and after forty or fifty years of North Texas humidity swings, the wood starts to pull away from the studs.

Re-Shimming and Latch Adjustment

When a door swings open on its own or the deadbolt no longer lines up, the fix is usually re-shimming behind the hinges and latch plate. We remove the casing, reset the jamb with composite shims, and re-secure everything with long structural screws that bite into the framing. This is a two-to-three-hour job on most Fort Worth homes, and it immediately changes how the door feels to open and close.

Rotted Jamb Bottom Repair

Fort Worth’s spring rain and irrigation overspray rot out the bottom six inches of door jambs faster than anywhere else we work. We cut out the rotted section, splice in new wood, or replace the full leg with a rot-resistant composite, then re-case and paint. If the subfloor damage extends under the threshold, that’s a bigger repair, and we’ll tell you before we start, not after the wall is open.

Trusted Brands We Service in Fort Worth

We install and service doors from Therma-Tru, PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, and ViewLux. For Fort Worth homeowners, the workhorses are Therma-Tru fiberglass entry doors, which hold up in the heat without warping, and PGT impact-rated units for west-facing exposures that take spring hailstorms head-on. We keep common parts for these brands in local inventory, so a threshold replacement or hinge adjustment on an existing door doesn’t turn into a three-week wait. If you already have a quality door and only the frame or hardware is failing, we’ll tell you that honestly. Our job is to fix the door, not sell you a replacement you don’t need.

Common Door Replacement Problems We See in Fort Worth Homes

– West-facing warping on ranch homes: In neighborhoods like Wedgwood and Ridglea, doors on the west elevation take the full afternoon sun in July and August. Fiberglass units hold up, but older steel and wood doors warp or delaminate within a few seasons.
– Unincorporated Tarrant County permitting surprises: Addresses south of Loop 820 near Crowley Road or west near the Parker/Tarrant county line often sit outside Fort Worth city limits. A door replacement that would be a same-day job in the city can need a county inspection before we touch the jamb.
– Gravel and dirt driveway access failures: County roads and long private drives turn soft after spring rain. A delivery truck carrying a pre-hung door can sink a tire and crack the jamb before it’s unloaded. We plan haul routes and equipment staging before quoting.
– Septic and well setback conflicts on ADU doors: Replacing a side or rear door on a detached shop or garage can push the new opening too close to a septic drain field or wellhead under Tarrant County rules. We check setback requirements during the quote, not after the opening is cut.
– Clay soil shifting the rough opening: Fort Worth’s gumbo clay expands and contracts every season, and older slab foundations move with it. That’s why we shim and level every jamb to the current floor plane instead of trusting the original framing.

Pricing for Door Replacement in Fort Worth, TX

How Acreage Door Replacement Changes the Scope in Fort Worth

Unincorporated wedge areas around Fort Worth, especially south of Loop 820 near Crowley Road and west near the Parker/Tarrant county line, often fall under Tarrant County permitting instead of City of Fort Worth review. A door replacement that would sail through city review may instead trigger county-level inspection and septic or well setback checks before the jamb is ever touched. That means the job isn’t just swapping a slab. It’s checking the address against county parcel maps, measuring the setback from the nearest drain field or wellhead, and confirming the haul route can handle a truck with a pre-hung unit on board.

We scope all of this before we write a quote. It’s why our Fort Worth estimates take a little longer to prepare than a generic door company’s. And it’s why the number we hand you is the number you’ll pay. County setback rules don’t get discovered halfway through the job when we’ve already cut the opening.

On a five-acre spread off Old Weatherford Road near Aledo ISD, our crew replaced a warped north-facing Therma-Tru fiberglass entry on a 1970s ranch and a side door on a detached shop. The original jambs had pulled away from the studs enough that daylight showed around the latch side. We re-shimmed both jambs, set new Therma-Tru units with low-E insulated glass and wind-rated installation, and had to route one haul on a county road to avoid a low oak canopy. That added half a day before the first screw went in. A door company that only works city blocks wouldn’t have planned for that. We did, because we work Fort Worth acreage every month.

We Also Serve Cities Near Fort Worth

Our Fort Worth crews also cover Haltom City, Keller, and Azle, including the unincorporated stretches between them. If you’re on a county road just outside city limits, the same planning applies: permit checks, septic setbacks, and haul access solved before we write the quote.

FAQs About Door Replacement in Fort Worth

How does Tarrant County permitting differ from Fort Worth city permitting for door replacement on an acreage lot?

Tarrant County requires inspections that the City of Fort Worth generally doesn’t for a straight door replacement. If your address sits in an unincorporated pocket, you’ll need a county permit, and any opening near a septic drain field or wellhead must meet setback distances before final approval. That adds $300 – $800 in permit and reinspection fees and can push a one-day job to two or three days. We run the parcel check before quoting, so you know what’s coming. Call (682) 354-9300 and we’ll walk you through what applies to your address.

Does the afternoon sun warp doors on west-facing ranch homes in Fort Worth differently than on an in-town bungalow?

Yes, and the difference is the depth of the wall and the amount of exposed door face. Ranch homes on open acreage have no shade canopy, so west-facing doors bake for six hours a day from June through September. Wood doors cup and steel doors bow at the top corner. Fiberglass units with a polyurethane core, like the Therma-Tru doors we install most often on these homes, hold their shape because they don’t absorb moisture or conduct heat the same way. If your current door is metal or wood and faces west, we’ll tell you what replacement will actually last before we quote it.

Can you replace the side door on a detached shop or garage that is closer than 10 feet to a septic line and still pass county inspection?

Usually no, not without either moving the opening or getting a variance from Tarrant County. The county enforces minimum distances between door openings and septic components, and cutting a new opening closer than the setback triggers a fail. In some cases we can re-hang a door in the existing opening without changing its footprint and stay compliant. In others, we recommend a different location entirely. We measure this during the estimate, not after the rough opening is cut. For an exact read on your shop or ADU, call (682) 354-9300 and we’ll scope it in person.

What does door replacement cost in Fort Worth compared to Keller or Azle?

Fort Worth city-lot pricing runs $1,100 – $4,200 for a standard single entry. Keller and Azle run similar numbers for the door itself, but acreage and county-permit addresses outside city limits add $300 – $800 in permit and inspection costs. The biggest variable isn’t the city line. It’s whether your home is on a slab in a platted subdivision or on five acres with a gravel drive and a detached shop. We’ll quote the actual number for your address, in writing, before any work starts.

What warranty does Juniper Windows Fort Worth include on a door replacement?

Every door we install in Fort Worth carries the 365-Day Done Right Promise: if the work isn’t right, we make it right for a full year, parts and labor, in writing. That covers the installation, not just the door unit. Product warranties from Therma-Tru, PGT, CGI, and the other brands we carry run separately and typically cover the door itself for ten years to lifetime depending on the line. We’ll give you both warranty documents at the quote stage, so there’s nothing to guess about later.

Get Your Fort Worth Door Replacement Quote

If your front door sticks, your shop door won’t latch, or you’re tired of feeling the July heat bleed through the threshold, call us. We’ll come out, measure, check the permitting situation for your address, and hand you a written price before any work starts. That’s how we’ve operated since 2001, and it’s why Fort Worth homeowners keep calling us. Reach Sean Mackey and the Juniper Windows Fort Worth team at (682) 354-9300 for a free estimate.

Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth and Tarrant County.