New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Fort Worth Homeowners Choose CGI Windows & Doors
Juniper Windows Fort Worth provides independent CGI service in Fort Worth, from single-sash repairs on Pinnacle double hungs to full-frame Estate replacements in homes throughout Tarrant County. We are not an authorized CGI dealer, and we do not pretend to be one: we are an independent service provider whose technicians disassemble these products daily, which means we know their failure points better than most. When a CGI window in Fort Worth fails, it usually fails predictably, and we fix it with OEM parts where tolerances demand it and honest guidance where replacement makes more sense than repair. Call (682) 354-9300 and we will tell you what is actually wrong before we quote a dollar figure.
Fort Worth’s weather swings are brutal on windows and doors. Triple-digit summers bake west-facing units. Spring hailstorms batter glass and aluminum frames. Now and then a hard freeze cracks a seal that was already stressed. CGI builds impact-rated and high-thermal-performance products designed for exactly this, and many Fort Worth homeowners chose CGI for that reason. But even the best hardware wears out, binds, or gets installed imperfectly, and that is where we come in.
Why Trust Juniper Windows Fort Worth for Your CGI Windows & Doors?
We see CGI Pinnacle, Estate, Targa, and Sentry windows and doors in Fort Worth homes every week. That repetition matters. A technician who handles a product line once a month learns from the manual. A technician who rebuilds Estate balances and resets Pinnacle tilt-latches on a regular basis learns the quirks no documentation covers, like which weatherstripping profiles bind in dry heat and which balance springs lose tension fastest on full west exposure.
Sean Mackey runs Juniper Windows Fort Worth. He learned trade fundamentals at Los Angeles Trade-Technical College and spent close to two decades on real job sites before building the Fort Worth operation. His crew has pulled CGI windows from 1950s ranch homes in Wedgwood, full-frame replacements in Ridglea, and new-construction sentry doors across Tarrant County. Sean’s rule is simple: get the numbers right up front, and the install takes care of itself. That is why you get a written price before any work begins, from a background-checked, uniformed technician who shows up when we say they will. And if anything is not right, the 365-Day Done Right Promise covers parts and labor, in writing, for a full year.
Common CGI Windows & Doors Problems We Fix in Fort Worth
- Pinnacle sashes racking and snapping tilt-latch tabs. This is the most common CGI issue we see in Fort Worth. When a Pinnacle double hung goes into an unlevel rough opening, the sash frame twists slightly under load. The tilt-latch tabs are plastic, and on a racked sash they snap off flush with the stile. Replacing the tab without correcting the opening geometry just means it will snap again in six months. We address both.
- Estate balance springs losing tension early. CGI Estate windows use balance springs that do not love continuous high heat. On Fort Worth homes where an Estate window faces west and catches full afternoon sun, we see balance fatigue begin around the three-to-five-year mark. The sash will not stay up, or it drops suddenly when released. We rebuild these with OEM components and adjust the tension.
- Interlocking meeting rails on sliders eating through the lower track gasket. Fort Worth has hard water. That mineral content accumulates on Targa slider meeting rails, and the scale acts like sandpaper on the lower track gasket every time the window cycles. Once the gasket wears through, air and dust get in, and the rail starts dragging on raw aluminum. We replace the gasket and smooth the rail before it scores the track.
- Torn integral nailing fins leading to hidden sill rot. This one shows up more on re-siding jobs and deck additions. When a CGI window with an integral nailing fin gets flashed incorrectly, or the fin tears during installation, water gets behind the frame. Homeowners see a small crack in drywall or a soft spot at the sill and assume the window itself failed. Often the glass is fine; the waterproofing is not. We open it up, find the real leak, and fix it properly.
- Fogged glass units with failed seals. Fort Worth’s temperature swings work on insulating glass seals year after year. A CGI unit with a compromised seal fogs between the panes and loses thermal performance. On Estate and Pinnacle lines we replace the glass pack when the frames are still true. If the frame has racked or the sill shows rot, we will tell you before quoting glass.
CGI Parts & Our Repair-vs-Replace Approach
We start every CGI repair with OEM components whenever the existing extrusion profile is sound. Estate balance springs and Pinnacle tilt-latches are two examples where generic parts fail too often to justify the savings: the tolerances are tight, and a slightly-off balance makes the sash feel wrong forever. We keep common OEM parts in local stock for fast turnaround on Fort Worth service calls, including Estate balances, Pinnacle latches, and Targa track gaskets.
Where aftermarket parts genuinely outperform factory hardware, we will say so. Cam locks and wool pile are good examples: high-quality aftermarket versions often seal better and lock more smoothly than original spec on older CGI windows. And we will tell you flat-out when a full-frame replacement costs less long-term than chasing a rotted sill or a racked frame. Honesty is the repair strategy. Call (682) 354-9300 and we will give you a written price either way.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We inspect the unit, measure the rough opening if needed, and identify exactly what failed. This includes checking the health of the weatherstripping, balances, and frame on all four sides, not just the obvious symptom.
- 2
Written price. Before any work starts, you get a dollar figure in writing. Parts and labor are broken out. That number does not change at the door.
- 3
Repair or install. We use OEM CGI components for critical tolerances, aftermarket where it honestly outperforms, and full-frame or insert replacement when that is the right call. Every job is done with the existing opening checked for square, level, and water intrusion.
- 4
Air and water testing. After every CGI window or door we service, we check for drafts, proper sash travel, latch engagement, and seal integrity before we leave. A window that looks fixed but leaks is not fixed.
- 5
365-Day Done Right Promise. Parts and labor, in writing, for a full year. If our repair fails, we come back at no charge. That includes a free second visit if something we did was not done right.
CGI Products We Service & Install in Fort Worth
We work on the full CGI residential lineup: Pinnacle double hungs and casements, Estate sliders and picture windows, Targa sliding glass doors, and Sentry entry doors. Our crews handle insert window replacement, full frame replacement, and hurricane impact window installation, all quoted in writing before work begins. For Fort Worth homeowners in older Fairmount bungalows, mid-century Wedgwood ranchers, or newer developments, the right CGI product is the one installed correctly for this climate and this soil.
We Also Service These Brands
CGI is not the only window line we know well. We also service PGT, CWS, ES Windows, and ECO Window Systems products across Fort Worth. If you have mixed brands in your home, one call covers all of them: (682) 354-9300.
FAQs – CGI Windows & Doors Service in Fort Worth
No. We are an independent CGI service provider, not an authorized dealer or warranty station. That independence is useful: we evaluate repairs purely on what is best for your home, not what pushes a manufacturer program. The 365-Day Done Right Promise is ours, in writing, on every job.
Yes, whenever the tolerance demands it. Estate balance springs and Pinnacle tilt-latches are two places we insist on OEM because generics simply do not hold up. For less critical hardware like cam locks and wool pile, we will install quality aftermarket pieces that perform as well as or better than original, and we will tell you why. Want OEM only? Just ask; call (682) 354-9300 and we will quote it that way.
Most single-unit repairs, like an Estate balance rebuild or a Pinnacle tilt-latch replacement, finish in one visit of two to three hours. Full-frame replacements typically take a day per opening, depending on the condition of the rough opening we uncover. We give you a live arrival time and keep you updated with photos before we leave.
Pinnacle, Estate, Targa, and Sentry cover the majority of CGI residential installations in Fort Worth. Pinnacle is a double hung and casement series, Estate spans sliders and picture windows, Targa is the sliding glass door line, and Sentry covers entry doors. If you have something less common, call us: (682) 354-9300, and we will tell you if we can help before you schedule anything.
Any structural or glass warranty on your CGI windows typically remains with the manufacturer for covered defects. However, self-repair or third-party work can affect warranty coverage in some cases, especially if the work modifies the frame or glass. We will never alter a unit in a way that compromises warranty coverage without telling you first. Our own labor comes with the 365-Day Done Right Promise, in writing.
Repairs in CGI in Haltom City and Fort Worth typically run from $140 to $380 per unit, depending on the failure. An Estate balance rebuild is usually $140 – $220 per sash. A Pinnacle tilt-latch replacement pairs around $120 – $200 with any required opening adjustment. Full-frame replacement of a standard CGI window in Fort Worth starts around $1,700 to $2,600 per opening, installed, depending on size, glass package, and the condition of the rough opening. Call (682) 354-9300 for an exact written quote; estimates are free.
The glass is almost never the problem. Pinnacle sashes break tilt-latch tabs because the sash frame is racking, usually due to an unlevel rough opening or a settled pier-and-beam slab underneath. Putting a new tab on a racked sash just breaks it again. We fix the rack, reset the sash, and replace the latch receiver. Call (682) 354-9300 and we will diagnose the actual cause before quoting anything.
Yes. In most cases we rebuild Estate balances with OEM springs, tune the tension for the window’s exposure, and the sash works like new. Whole-sash replacement is only necessary if the sash extrusion itself is bent, cracked, or rotted. Rebuilding is usually one-fifth to one-third the cost of a new sash.
An insert replacement fits a new CGI Windows & Doors in Saginaw, TX into the existing frame, which works when the frame is square, sealed, and rot-free. A full-frame replacement removes everything down to the rough opening and replaces the frame, sill, and trim. In Fort Worth, where clay soil shifts and older openings are often out of square, we recommend full-frame when the existing frame has racked or the sill shows any rot. We quote both options in writing so you can compare real numbers.
We stock OEM gaskets and weatherstripping for Targa sliders. The lower track gasket is a wear item in Fort Worth because hard-water scale on the meeting rail grinds into it. We replace it with the correct CGI profile, not generic pile, because the wrong pile height causes the slider to drag or leak air. For wool pile on the vertical stiles, we use quality aftermarket material that matches or exceeds original performance.
Failed seals on insulating glass are sometimes covered under CGI’s glass warranty, depending on the age of the unit and the original purchase terms. You will need to contact CGI or the original installer about that. If warranty coverage does not apply or the process is stalled, we can replace the glass pack as a non-warranty repair. Call (682) 354-9300 and we will help you figure out which path makes sense before you spend anything.
Book Your CGI Service in Fort Worth, TX
If your CGI windows or doors need service, or you are planning replacement windows in Fort Worth, call (682) 354-9300. You will talk to a real person, get a straight answer about what is wrong, and receive a written price before we start. Free estimates, live arrival times, and a full year of coverage on our work.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth since 2001.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.