New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across White Settlement
Window replacement in White Settlement typically costs $650 – $1,450 per window for a standard retrofit, while full-frame tear-outs run $1,200 – $2,800 per opening depending on flashing work, impact ratings, and whether we’re dealing with pre-1980s construction. Most jobs we scope here finish in one to two days once materials hit our warehouse. If you live west of Loop 820 near Saddle Trail, Cherry Lane, or the acreage off Silver Creek Road, you already know what spring hailstorms do to original aluminum frames. Call (682) 354-9300 and we’ll walk the house with you, measure every opening, and hand you a written price before anything gets ordered.
Why Juniper Windows Fort Worth Is White Settlement’s Preferred Window Replacement Company
We’ve spent enough time in White Settlement to know which houses were built before the city tightened its building codes in the 1980s, and that changes how we quote the job. Those original windows went in without sill pans or jamb flashing, so a straight swap that looks fine from the street can hide rotted sheathing behind the brick veneer. Sean Mackey, who leads our team, insists every pre-1980s replacement starts with pulling the trim and checking what’s actually behind the frame before we finalize a number. That’s not a sales tactic; it’s how you avoid a $2,100 quote turning into a $4,800 discovery once the wall is open.
Our White Settlement customers regularly mention the written-price commitment in their feedback, because it’s the difference between a quote and a guess. Every estimate includes line items for flashing retrofit, foam insulation, sill pan installation, and disposal. We don’t show up on install day with a change order. The number we hand you is the number on the invoice.
Window Replacement Company in White Settlement
A Window Replacement Company in White Settlement handles full-frame replacements and insert retrofits for homeowners whose original single-pane aluminum windows have stopped sealing, warped in the afternoon sun, or started letting water behind the brick. The job involves removing the old sash and frame, inspecting the rough opening for rot, installing new flashing and a sill pan where the original never had one, setting the new unit level and square, insulating the gap, and trimming the exterior and interior back to a clean finish. Most ranch-style homes here need a hybrid approach: inserts where the frame is still sound, full teardowns where water has already done its work. Expect $650 – $1,450 per insert and $1,200 – $2,800 per full-frame replacement, with impact-rated glass adding $180 – $420 per unit depending on size and product line.
Pre-1980s Full-Frame Work
Homes built along Chapel Creek and up toward the acreage on the west side predate the flashing requirements that newer construction takes for granted. When we pull those frames, we usually find caulk over bare sheathing and a jamb that’s been quietly rotting for decades. Our full-frame replacements on these houses always include a new sill pan, jamb flashing, and backer rod before the new unit goes in. That’s local code-savvy most quoted prices don’t account for.
Insert Windows for Sound Frames
Where the original frame is still solid and square, an insert replacement costs less and preserves more of the interior and exterior trim. White Settlement’s brick veneer ranches are actually good candidates for inserts on interior walls. The west-facing walls, though, usually need full teardowns because sun and storm damage concentrate there first.
Window Glass Replacement in White Settlement
Window Glass Replacement in White Settlement means swapping the insulated glass unit (IGU) inside an existing frame rather than replacing the entire window, and it runs $250 – $550 per pane depending on size, Low-E coatings, and whether the glass needs to be impact-rated. This is the right call when a hailstorm cracks one pane but the frame itself is still sealing fine. Residents near Cherry Park and the neighborhoods off South Cherry Lane see this constantly after spring storms move through Tornado Alley: one shattered pane, a perfectly good frame, and a quote for a whole new window that they don’t actually need. We measure the existing IGU, match the glass package, and have the replacement built to fit the original sash. Turnaround for custom IGUs is usually three to five business days.
Impact-Rated Glass Upgrades
When we replace glass in White Settlement, we always ask where the window faces. West-facing units get pounded by full afternoon sun and the leading edge of every storm that rolls in off the plains. Upgrading those panes to impact-rated glass (built to resist wind-borne debris without shattering) while reusing the existing frame can cut the cost compared to a full impact window and still give you real protection at the point where failure usually happens. CGI and CWS both make retrofit IGUs that drop into older frames, which matters for ranch homes where the original window openings were sized before modern standard dimensions.
Fogged or Failed Seals
Double-pane windows that have gone cloudy between the glass can’t be cleaned; the IGU has lost its seal and the gas fill has escaped. In White Settlement’s humid summers, this shows up as condensation you can’t wipe away. Glass replacement fixes it for a fraction of the cost of a new window, as long as the frame’s still doing its job.
Trusted Brands We Service in White Settlement
We stock and install CGI, CWS, and ES Windows product lines because they hold up to the weather this part of Tarrant County actually gets. Impact-rated, Miami-Dade NOA-tested, and built for wind-borne debris, these aren’t showroom windows that fall apart in a supercell. We keep common sizes and glass packages available for fast turnaround on White Settlement jobs, and when a specific opening needs a custom unit, our suppliers run on a three-to-five-day schedule. Window Replacement teams at Juniper Windows Fort Worth also service and replace glass in existing Therma-Tru door units and Mr-Glass storm doors if your project includes exterior doors along with the windows.
Common Window Replacement Problems We See in White Settlement Homes
- Missing sill flashing on pre-1980s frames. The original aluminum windows went in with caulk over open sheathing, so spring hailstorms drive water behind the brick veneer and rot the jamb and sill plate. By the time you see a stain below the window, the real damage is inside the wall.
- Warped sashes on west-facing walls. White Settlement’s hot afternoons bake the west side of the house, and original single-pane aluminum frames transfer that heat straight into the glass. Sashes warp, double-hungs won’t seat, and conditioned air leaks out all summer.
- Outbuildings with windows that don’t meet current setbacks. On acreage lots with septic systems and wells, a shop or detached ADU window often can’t be replaced in the same footprint without moving the unit to satisfy code. We scope this before quoting, because a standard retrofit that fails inspection costs you twice.
- Hail damage that looks minor but compounds. A cracked pane is one thing. A dozen micro-fractures in impact-adjacent glazing is another. After every major storm, we walk White Settlement homes and find windows that are holding for now but will fail before the next season.
Pricing for Window Replacement in White Settlement, TX
A typical insert replacement in White Settlement runs $650 – $1,450 per window. Full-frame replacement with flashing retrofit on a pre-1980s home runs $1,200 – $2,800 per opening. Impact-rated glass adds $180 – $420 per unit. Window glass-only replacement runs $250 – $550 per pane. The big variables on acreage properties are access (long hauls from the street to the house add labor), outbuilding permitting (setback issues can require engineered drawings), and the condition of the existing framing once we pull the old window. That last one is why we never quote a White Settlement job without seeing the house. Call (682) 354-9300 to schedule a free estimate, and we’ll put every number in writing before you decide anything.
We Also Serve Cities Near White Settlement
Our crews cover White Settlement and the surrounding west-side communities, including Fort Worth, Saginaw, Haltom City, and Keller. If you’re just outside the city limits on county land off Silver Creek Road or heading toward Lake Worth, we’re still your local crew. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and the techs who show up are the same uniformed, background-checked installers who work Window Replacement in White Settlement every week.
Serving White Settlement, TX - Our Local Coverage Area
We’re based in the White Settlement area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in White Settlement
Most window replacements in White Settlement city limits require a city permit when the opening size changes or when full-frame work touches structural framing. If you’re on county land outside city limits, you may only need to satisfy county requirements, but outbuildings with septic and well setbacks can trigger additional reviews that change where a window can legally go. We handle permit scope on every quote and will tell you before you sign which authority applies to your address. Call (682) 354-9300 and we’ll check your specific property.
Yes, and that’s one of the most common requests we get in White Settlement’s mid-century neighborhoods. We can install impact-rated IGUs or full units that keep the narrow sightlines of the original aluminum frames while upgrading the glass to meet current storm standards. The catch is that original frames from the 1960s often have hidden rot at the jambs, so we may need to rebuild the rough opening before the new unit goes in. We’ll know once we pull the trim. Call (682) 354-9300 for a free assessment.
Yes, though the biggest savings come from replacing leaky single-pane aluminum with a modern IGU that has Low-E coating and a warm-edge spacer, not just from the impact rating itself. White Settlement’s summers are brutal, and homes with original windows lose a measurable amount of conditioned air through failed seals and warped sashes. On a 1970s ranch off Saddle Trail, we pulled a rotted double-hung and found the original aluminum frame had no sill flashing, just caulk over open sheathing. We replaced it with a PGT impact-rated casement and flashed the jambs properly; the homeowners cut their cooling bill enough to add a matching unit in the detached shop the next season. Your results depend on how many windows you replace and which direction they face, but the physics is the same. Call (682) 354-9300 to scope your house.
You can put impact glass in an outbuilding; there’s no rule requiring an ADU or shop to match the house. The issue on White Settlement acreage is setback compliance. If your septic system, well, or property line placement means the existing window location no longer meets code, moving the unit during replacement can trigger a redesign. We check setback requirements before quoting any outbuilding window work so you don’t pay for a retrofit that fails inspection. Call (682) 354-9300 with your property address and we’ll verify what applies.
Usually, yes. On pre-1980s homes in White Settlement, original windows were set without sill pans or jamb flashing, so water from spring hailstorms runs behind the brick veneer and stains the wall below the window while the real rot happens inside the framing. By the time you see the stain, the jamb or sill plate may already be compromised. A glass-only replacement won’t fix it; the opening needs to be torn down, flashing installed, and the unit reset. Call (682) 354-9300 and we’ll pull the trim and show you exactly what’s happening before we quote the repair.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving White Settlement with window and our Door Replacement in White Settlement, backed by the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.