New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across River Oaks
Door replacement in River Oaks typically runs between $1,100 and $4,800 depending on whether you’re swapping a slab into an existing jamb or pulling the whole unit for a custom pre-hung install. Most jobs in River Oaks take one to two days once materials arrive, though custom millwork and specialty glass can push the calendar to four or six weeks for fabrication. We work throughout River Oaks and know exactly what these 1950s to 1970s brick-veneer homes throw at an installer: undersized brickmould openings, non-standard sill heights, and jamb widths that don’t match anything on a distributor’s shelf. If you’re dealing with a door that sticks, leaks, or simply looks tired, call (682) 354-9300 and we’ll send a door installer who actually knows River Oaks.
This page is built for River Oaks homeowners who want a real number, a real timeline, and no surprises when the crew shows up. Juniper Windows & Doors has been installing doors since 2001 under the Relay Home Co. family, and every River Oaks project starts with a written price before any work begins. That’s not a sales line. It’s how we operate, and it’s why our Door Replacement team handles everything from standard slab swaps to fully custom architectural entries in this exact suburb.
Why Juniper Windows Fort Worth Is River Oaks’s Preferred Door Replacement Company
Sean Mackey runs our Fort Worth operation with a simple rule: if the opening measurement isn’t verified three ways before ordering, nothing gets ordered. That rule exists because River Oaks homes punish guesswork. We’ve pulled doors on Roberts Cut Off Road, Meadowbrook Drive, and along Ohio Garden Road where the framed opening was 34-3/4 inches but the homeowner’s tape said 36. We catch that before the purchase order goes in.
Homeowners across River Oaks call us for door replacement because we answer the phone with a live person, 24/7, and because our technicians arrive in uniform with a tracked arrival time. You’ll know who’s walking up your driveway before they ring the bell. Every door project carries the 365-Day Done Right Promise: if the install isn’t right, we make it right, parts and labor, in writing, for a full year.
Our River Oaks customers also appreciate that we’re not a general remodeling crew. Juniper does our Window Installation in River Oaks and doors. That’s it. When you ask us about a Therma-Tru fiberglass door with a matching transom, you’re talking to someone who has set more of them in brickmould openings than we can count, not a handyman who also lays tile, hangs drywall, and builds patios.
Interior Door Installation in River Oaks
Interior Door Installation in River Oaks usually means one of two things: swapping dated hollow-core slabs for solid-core or panel doors throughout a 1960s ranch, or fitting a single craftsman-style door where a bedroom or hallway transition needs a visual upgrade. Most River Oaks interior door installs run $225 to $650 per door including the slab, hinges, hardware, and labor, assuming the existing jamb is square and in good shape. If we’re dealing with a door that was custom-cut decades ago or a jamb that has settled out of plumb, expect to add $120 to $280 per opening for shimming, trimming, and re-mortising the hinges.
Custom Millwork and Pre-Primed Slabs
Several River Oaks homes we’ve worked on have hallway and closet openings that were never standardized even when they were built. Off-the-shelf slabs come 24, 28, 30, 32, and 36 inches wide. A 1968 River Oaks hallway might have a 29-3/4-inch opening. When that happens, we order pre-primed slabs and cut them on site, or we route custom millwork through a local shop for a door that matches the original profile. The material cost difference is modest; the real cost is the skilled labor to make a square door fit a not-square opening.
Hardware and Finish Coordination
We regularly work with River Oaks homeowners and their designers to coordinate door hardware finishes with existing cabinetry pulls, hinges, and lighting fixtures. Matte black, aged bronze, polished nickel. We’ll spec the hinge type, backset, and strike plate configuration before the slab is ordered so the door arrives ready to hang with no extra trips to the hardware store. If the designer wants a specific passage set, we’ll quote it line-item so the written price includes every screw.
Door Installers in River Oaks
Door Installers in River Oaks have to solve for something that newer subdivisions never deal with: brick veneer doesn’t move. On a 2020 build, you can order a standard pre-hung unit and shim it into a rough opening with room to spare. On a 1964 River Oaks ranch, the framed opening was cut for a single-glazed wood door that measured 34-3/4 inches, and brick was laid around the brickmould with almost no reveal. A standard pre-hung today needs 36 inches. That means our River Oaks door installers either spec a custom-width slab, cut back brick, or rebuild the jamb in place. Labor for this kind of retrofit typically runs $950 to $2,400 per exterior opening, including demo, jamb work, flashing, and setting the new door.
Retrofit Work Without Damaging Brick
We’ve done enough River Oaks door replacements to know which brick veneers tolerate a grinding wheel and which ones spall the moment you touch them. When the opening is too tight and the brick is fragile, we keep the original jamb, square it with hardwood shims and a hand plane, and install a custom-sized slab that marries perfectly to the existing brickmould profile. The homeowner gets a new fiberglass or steel door without a single cracked brick. That’s the kind of restraint you learn after years of working this housing stock.
Flashing, Sill Pan, and Code Details
Every exterior door replacement in River Oaks gets a proper sill pan and flashing tape before the new unit goes in. We don’t skip the pan because “the old one didn’t leak.” North Texas thunderstorms and the humidity we get from June through September will find a gap in the weatherstrip and feed water straight into the subfloor. Our installers flash the rough opening, set the pan, and detail the jambs so water sheds away from the framing. When we’re done, the new door assembly is sealed at every transition against the brickmould.
Trusted Brands We Service in River Oaks
We carry and install a focused set of door and window product lines, including CWS, ES Windows, ECO Window Systems, and Mr-Glass, alongside Therma-Tru for fiberglass doors and PGT for impact-rated glass. For River Oaks homeowners, that means we’re not pushing whatever the distributor overstocked this quarter. We spec the product that fits the opening, the exposure, and the budget. Because we stock fast-moving parts and have direct relationships with these manufacturers, a custom fiberglass door that used to take six weeks can often be ordered, built, and delivered in four. When hail season hits and a River Oaks homeowner needs impact-rated glass in a door panel, we can get it faster than a shop that orders through a third party.
Common Door Replacement Problems We See in River Oaks Homes
- Undersized brickmould openings from original 1950s-1970s construction. The framed rough opening was cut for a skinny single-glazed wood door, and today’s standard pre-hung units simply won’t fit without cutting brick or ordering custom. We measure three ways before ordering anything.
- Failed weatherstripping and gaps that leak humid air. The original door stop kerf was cut for a thin felt strip that’s long gone. The 1/8-inch gap left behind lets North Texas humidity push straight into the house and drives up cooling costs every summer.
- Aluminum sliders caulked into place decades ago. We pulled one on a 1962 ranch off Roberts Cut Off Road that had been caulked so many times the original jamb was buried under a half-inch of silicone. The rough opening measured 4-9/16 inches wide instead of the assumed 4-5/8. We ordered a custom Therma-Tru door with a matching transom built to that exact size.
- Rotted wood sills under brick on both sides. When the sill sits below the finished floor and there’s brick on both sides, you can’t just cut it out and slide a new one in. We rebuild the sill in place, flash it properly, and reset the door so it drains instead of holding water.
Pricing for Door Replacement in River Oaks, TX
Here’s what River Oaks homeowners actually pay, in writing, before we start: interior slab replacement runs $225 to $650 per door. Exterior door replacement on a 1950s-1970s brick ranch runs $1,400 to $3,800 per opening for a standard unit, and $2,800 to $4,800 when the opening needs custom millwork, brickmould reconstruction, or an impact-rated glass package. Custom architectural doors with specialty finishes, transoms, or designer-specified hardware can run $5,500 to $9,000. The price is locked in writing before we order materials, and it doesn’t change at the door. No change orders, no surprise invoices. Call (682) 354-9300 for a free estimate; we’ll measure on site and hand you a line-item quote.
We Also Serve Cities Near River Oaks
Our door installers cover River Oaks and the surrounding Tarrant County communities, including Door Replacement in River Oaks and nearby Fort Worth, Saginaw, Haltom City, and Keller. If you’re just outside River Oaks, call and check; we likely cover your street too.
Serving River Oaks, TX - Our Local Coverage Area
We’re based in the River Oaks area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in River Oaks
Most River Oaks brickmould openings from the 1950s through 1970s were framed at 34-1/2 to 35-1/4 inches wide, not the 36-inch rough opening a standard pre-hung unit needs. The brick veneer was laid tight to the original brickmould, so you can’t just chisel out a bit and make it fit. You need either a custom-width door, a jamb rebuild in place, or selective brick cutting. Our crew measures the actual opening three ways before we order anything, so you never get stuck with a door that sits in the garage until someone pays for brickwork. Call (682) 354-9300 for a free on-site measurement.
We rebuild the sill in place without disturbing the surrounding brick. That means cutting out the rotted or failed wood, installing a pressure-treated or composite sill pan sloped for drainage, flashing the pan up the jamb sides, and resetting the door assembly on top of it. In River Oaks we see this constantly on slab-on-grade ranches where the finish floor was raised during a remodel. It’s labor-intensive but entirely doable, and the new sill will outlast the original. The job typically runs $350 to $700 in labor on top of the door cost.
Yes, we coordinate directly with architects, designers, and general contractors on River Oaks custom millwork projects. We’ll pull shop drawings, confirm hinge locations, stile and rail dimensions, and hardware specs before the door goes into production. Designers often choose our team specifically because we provide line-item written pricing on long-lead custom doors, which lets the architect hold the schedule without holding the budget. We’ve worked on River Oaks homes where the custom entry door was the critical path item for the entire renovation, and we delivered it on time because the measurement was locked before the order was placed.
For a door that takes the west or northwest wind during a North Texas thunderstorm, we recommend PGT impact-rated laminated glass in a door panel that carries the same design pressure rating as the adjacent windows. Impact-rated glass is built to resist wind-borne debris without shattering, which matters in hail country. We’ll also match the SHGC (Solar Heat Gain Coefficient) to your existing low-E windows so the interior light and heat stay consistent. A River Oaks door with impact glass and a matching transom typically adds $800 to $1,400 to the project cost.
Lead time, not labor, sets the calendar on custom River Oaks door work. A standard fiberglass or steel pre-hung door is usually installed within one to two days of arrival, and many are in stock locally. A custom Therma-Tru door with a matching transom, specialty finish, or impact-rated glass typically takes four to six weeks from measurement to installation. Custom millwork doors with designer-specified hardware can run six to eight weeks. We’ll give you a firm schedule in writing when you sign, and the price is locked before anything is ordered. Call (682) 354-9300 to get your project on the calendar.
Ready to replace that sticking, leaking, or dated door? Call our River Oaks door installation team at (682) 354-9300 to schedule a free estimate. You’ll get a written price, a real arrival time, and a door installed by people who know River Oaks brickmould openings better than anyone.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving River Oaks door replacement and installation projects across Tarrant County.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.