PGT Window Replacement Nationwide

PGT Window Replacement: The Fort Worth Owner’s Guide

If you’ve got a PGT window in Fort Worth that’s fogged, cracked, or simply won’t seal, we stock and install PGT-compatible replacement windows with typical installed pricing running $450 – $1,100 for a standard single-hung or casement, and $900 – $2,400 for impact-rated units. Most single-window swaps take us two to four hours on site, and we carry common PGT sizes on the truck. How owners usually find us: they notice condensation between the panes that won’t wipe away, a sash that suddenly takes two hands to lift, or a hairline crack that’s been there since the last hail storm in Tarrant County started growing. That’s the window telling you the seal or the frame has given up, and PGT’s own warranty clock is often already expired by the time anyone notices.

Call (682) 354-9300

Which PGT Models This Applies To

PGT makes several lines that show up constantly in Fort Worth homes, and each has its own quirks. The WinGuard series is the impact-rated workhorse, built for coastal and high-wind zones, and it’s the one we see most on newer Tarrant County builds. The Spectrum line is PGT’s energy-focused vinyl option, common in Fairmount and other historic districts where homeowners want modern U-factors without changing the sightlines. Older Premier and EZ-Build series windows pop up too, usually in homes built between 1998 and 2012. The quickest identification route: open the sash and check the lower corner of the frame or the inside of the track for a white AAMA certification sticker, which lists the model line and the exact glass package. If that sticker’s faded away, measure the visible glass width and height to the nearest 1/8 inch, and our team can match it from there.

One gotcha worth knowing before you order anything: PGT’s WinGuard frames run about 3/8 inch deeper than their standard Spectrum frames, so a “same size” replacement from a different line won’t always drop into the existing opening without trim work. We’re an independent service provider, not a PGT dealer, which means we can be straight with you about whether an OEM PGT replacement makes sense or whether a quality aftermarket equivalent from CGI, CWS, or ES Windows gets you the same performance for less.

Signs Your PGT Window Replacement Is Failing

• Fog or haze you can’t clean. The desiccant inside the insulated glass unit (IGU) has saturated, and the argon or krypton fill has escaped. This is a sealed-unit failure, not a cleaning issue, and it only gets worse as Fort Worth’s humidity cycles through spring and summer.
• A sash that binds or drops when you open it. The spiral balancers or constant-force springs inside the window have worn out, or the vinyl track has warped from years of Texas sun hitting the west-facing side of the house.
• Daylight visible through the frame or around the edges. The weatherstripping has compressed, the frame joint has separated, or the installation shims have shifted. In older PGT Premier units, we regularly see the lower frame corners pull apart because the original install lacked proper weep drainage.
• Water staining on the interior sill or wall below the window. The weep ports are clogged or the outer sealant bead has failed, letting Fort Worth’s spring downpours work their way into the frame channel. Left alone, this rots the rough opening and turns a $600 sash replacement into a $4,000 frame rebuild.
• Laminated glass holding a crack but not shattering. The impact layer is doing its job, but the outer lite has been compromised since the last hail event, and now every temperature swing from a 40-degree morning to a 104-degree afternoon widens it a little more.

Replacement Cost & What’s Included

A full PGT window replacement in Fort Worth most commonly lands between $450 and $1,100 installed for a standard vinyl unit under 48 inches by 60 inches. Impact-rated WinGuard replacements start around $900 and can run up to $2,400 depending on size, glass package, and whether the original frame is salvageable or needs a complete new construction unit. Here’s how that breaks down:

• Standard PGT-compatible single-hung or casement, standard Low-E glass, installed: $450 – $800
• Impact-rated replacement windows (WinGuard-class performance), installed: $900 – $2,400
• Glass-only IGU swap when the original PGT frame is still square and sealed: $220 – $520
• Full-frame replacement when the original install has leaked and the rough opening needs repair: $700 – $1,400 plus any structural work we identify

Every Juniper Windows Fort Worth replacement gets a written price before we order a single part. That quote includes the window, haul-off of the old unit, flashing and sealant, interior and exterior trim restoration, and a 365-Day Done Right Promise covering both materials and labor. If the replacement fails in that first year for any reason related to our install, we return and fix it, in writing, no charge and no argument.

DIY or Call Us?

If the symptom is fogging between the panes, a broken lift rail, or worn weatherstripping, you can safely inspect and document the issue: check the AAMA sticker, measure the glass, and note whether the frame itself appears cracked or separated. What you shouldn’t do is try to separate a PGT impact-rated unit or force a warped vinyl frame back into square. WinGuard glass is heavy, laminated, and under pressure, and the frame extrusions rely on factory joints that don’t take kindly to pry bars. We’ve watched a single slipped sash in the Fairmount Historic District turn into a shattered tempered lite and a nasty cut because someone tried to leverage it back into the track. Get the numbers right up front, and the install takes care of itself. Call (682) 354-9300 and we’ll confirm your PGT model, measure the opening, and hand you a written price before anything gets ordered.

FAQs