New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Impact Garage Doors: The Fort Worth Owner’s Guide
We stock and install ECO Window Systems-compatible impact garage doors throughout Fort Worth, with most complete door replacements running $3,200 to $6,800 installed depending on size, track hardware, and opener integration. If you’re calling us, it’s usually one of three things: a panel that took a hit and cracked, rollers that have gone loud and rough, or a door that’s suddenly fighting the tracks after years of North Texas heat cycling. We carry ECO-compatible panels, track assemblies, rollers, hinges, springs, and weatherseals, and we can match most single and double doors without ordering from out of state.
Here’s the thing most Fort Worth homeowners learn the hard way: impact-rated doors aren’t just about the panels. The entire system – tracks, springs, hinges, reinforcement struts – has to work together or the wind rating means nothing. We’ll walk through what actually fails, what it costs to fix, and when it’s smarter to replace the whole door rather than patch it.
Which ECO Window Systems Models This Applies To
ECO Window Systems builds several impact-rated garage door lines, and parts compatibility is where most owners get burned. The most common models we service across Fort Worth are the ECO StormShield series and the ECO WindGuard series. The critical gotcha: StormShield and WindGuard share panel profiles and sightlines, but their track gauges are not interchangeable. StormShield uses a heavier 14-gauge track, while WindGuard ships with standard 16-gauge. That’s not a cosmetic detail – it affects roller size and spring tension. Put a WindGuard roller in a StormShield track and the door will struggle within months.
How to identify what you have: look for the white label on the interior side of the top panel, usually near the left hinge. It lists the series, panel width, and build date. If that label is gone or painted over, measure the track thickness with a caliper or bring us a photo and we’ll identify it from the spring assembly and bearing plates. For OEM ECO parts versus quality aftermarket equivalents: we recommend OEM for anything load-bearing – springs, cables, and hinge systems – because the aftermarket versions frequently use thinner gauge steel that wears faster in Fort Worth’s heat and dust. For weatherseals and bottom rubber, a quality aftermarket part performs just as well and saves you money.
Signs Your ECO Window Systems Impact Garage Door Is Failing
- Groaning or metal-on-metal grinding during operation. This is almost always dry or flattened rollers riding against worn hinge brackets. Left alone, the roller shafts score the track and you’re into a full track replacement instead of a $30 roller swap.
- Visible panel delamination or cracking at the edges. Impact-rated panels are laminated layers of aluminum and foam core. Fort Worth’s July heat can cause the adhesive to fail at the seams, especially on west-facing doors that take full afternoon sun. Once a panel starts separating, its wind rating is compromised.
- The door hesitates or stops midway. That’s typically a spring losing tension or a track that’s drifted out of plumb. If it happens more than once a week, the spring is done – it’s not going to heal.
- Daylight visible under the door or around the sides. The bottom weatherseal or side jamb seals have compressed and hardened. On an impact-rated door, gaps aren’t just an energy leak; they create pressure differentials that make the door work harder in high wind.
- You hear a sharp pop from the garage and the door won’t lift. That’s a torsion spring snapping under tension. This is the one failure that demands a professional – we cover why in the safety section below.
Replacement Cost & What’s Included
For a full ECO-compatible impact garage door in Fort Worth, plan on these installed ranges:
| Scope | Installed Price Range |
|---|---|
| Single-car impact door (8×7 to 9×7), basic track, new springs | $3,200 – $4,400 |
| Double-car impact door (16×7 to 18×7), standard track, new springs | $4,600 – $6,800 |
| Panel replacement only (matches existing ECO series) | $420 – $750 per panel |
| Roller and hinge refresh (all rollers, all hinges) | $240 – $390 |
| Torsion spring replacement (pair, labor included) | $310 – $480 |
The range comes down to three things: door size, track gauge (StormShield’s heavier track costs more), and whether your opener needs reprogramming or new safety sensors after the swap. Every quote we write includes parts, labor, haul-away of the old door, and a written line-item breakdown before anything starts. The work is covered by the 365-Day Done Right Promise: if something we installed fails within a year, parts and labor are on us, in writing. No change orders, no surprise at the finish.
DIY or Call Us?
There’s honest work an owner can do and work that belongs in professional hands. You can safely check visible wear: run the door a few times, watch for hesitation, listen for rough rolling, and inspect the weatherseal. You can tighten loose hinge bolts with a socket. That’s real maintenance, and it prevents surprise failures.
What you should not touch: torsion springs, lift cables, and anything under tension. A torsion spring holds hundreds of pounds of stored force, and when it lets go, it goes through sheetrock, not around it. Even with the door braced, the number of ways a spring swap goes sideways isn’t worth the hospital bill. We also see DIYers replace rollers without releasing the tension plate properly and end up with a track that’s bent beyond reuse. If the door is jumping, banging, or the spring is broken, call us at (682) 354-9300. Sean Mackey and our crew have handled ECO-specific replacements across Fort Worth long enough to do it fast and do it once.
FAQs
Expect 12 to 18 years of service life in Fort Worth’s climate, with springs needing replacement every 6 to 8 years and weatherseals every 3 to 4 years. West-facing doors that take direct afternoon sun tend to age on the shorter end of that range. Call us at (682) 354-9300 if your door is past year ten and starting to show panel seam wear.
Yes, in most cases. If the panels are solid and the track is straight, we can replace individual panels, rollers, hinges, springs, and seals without touching the door’s structure. Once multiple panels are delaminated or the track is bent, replacement is the more honest option. We’ll tell you which path makes sense, with numbers for both, before you commit to anything.
A single-door replacement with new track and springs typically takes 4 to 6 hours from arrival to cleanup. A double-door or a job with opener reprogramming can run 6 to 8 hours. You’ll get a live arrival time, before-and-after photos, and a digital invoice you can pay from a link when we’re done.
We stock the common ECO-compatible wear items on our trucks in Fort Worth: rollers, hinges, bottom seals, spring pairs, and bearing plates. Full panels and complete doors usually come from our local supplier within 3 to 5 business days. We also keep parts on hand for PGT, CGI, and CWS doors, so tell us what’s on your garage and we’ll let you know same-day what’s already here and what needs a few days.
Call (682) 354-9300 for a free estimate on your ECO Window Systems impact garage door in Fort Worth. We’ll send someone who knows the difference between a StormShield and a WindGuard track without checking a spec sheet.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.