New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Replacement in Fort Worth: What to Know First
ECO Window Systems door replacement in Fort Worth typically runs $1,450 to $4,200 installed, depending on the door configuration, glass package, and whether the frame itself needs rebuild work. Most ECO door jobs take one to two days from removal to final trim, and we give you a written line-item price before any work starts. If you’re in Fort Worth with a failed ECO door, a sticking slider, or a frame that’s started sagging, call (682) 354-9300 and we’ll tell you exactly what you’re dealing with.
This page is for homeowners who already own ECO Window Systems products and need a door replaced without the runaround. We’re an independent ECO Window Systems service provider, not a manufacturer-authorized dealer. That matters because we’re free to tell you when an aftermarket part genuinely outperforms the OEM version, and when it doesn’t. Our crew has been pulling ECO doors out of Fort Worth homes long enough to know which failures repeat and which ones are one-offs.
- Typical turnaround: 3 – 7 business days from signed quote to install, depending on parts availability and door configuration.
- Price posture: Written quote. No change orders at the door. Ever.
- Who this is for: Fort Worth homeowners with ECO Window Systems doors that have failed, warped, or simply reached end of life.
How ECO Window Systems Products Fail – and How We Fix Them
ECO doors fail in patterns. Once you’ve replaced enough of them across Fort Worth, you start recognizing the fingerprints. Here’s what we see on a regular basis and how we address it.
- Roller degradation on the ECO-8 and ECO-9 sliding glass doors. The factory rollers are nylon, and Fort Worth’s grit plus hard water does a number on the bearings. The door gets heavy, then it starts jumping the track, then the track itself deforms. We replace the rollers with sealed-bearing steel units and resurface or swap the track. This is the most common ECO door failure we see, especially in homes near the Trinity River where dust is constant.
- Warped sills on early-gen ECO-6 single French doors. Texas heat bouncing off concrete patios in July pushes surface temps past 140°. The composite sill on early ECO-6 units expands and eventually cups, which lets water pool at the threshold. The fix is a full sill replacement with a properly sloped aluminum threshold, not a caulk band-aid. We’ve done enough of these in Ridglea Hills and Wedgwood to know the exact tear-out depth.
- Fogged glass packs on ECO-8 patio doors with the standard insulated unit. The original sealant on early production runs fails around year 8 – 10 in Fort Worth’s heat-cycling climate. Glass replacement alone runs $350 – $650 per sash. If the frame is still square, we can swap just the insulated glass unit and keep the existing door.
- Lock strike misalignment on ECO-9 double doors after foundation settling. North Texas soil moves. Doors that locked perfectly in March won’t catch in August. We don’t just shim the strike plate – we measure the frame deflection first, then decide whether it’s a hinge adjustment, a strike relocation, or a frame re-square. Sometimes it’s a $180 fix. Sometimes the foundation movement means the door can’t be saved and full replacement becomes the honest answer.
- Failed weatherstripping channels on ECO-6 and ECO-7 entry doors. The original sweep and jamb seals are friction-fit, and Fort Worth’s clay-dust soil works its way into the channels until the seal breaks down. You’ll feel drafts at the threshold and see light gaps at the corners. We pull the old channels, clean the extrusion, and install a denser compression seal that actually keeps conditioned air where it belongs.
Our ECO Window Systems Door Replacement Process
Every ECO job follows the same beat. No surprises, no shortcuts. Here’s what actually happens from the first phone call to final sweep.
- 1
You call (682) 354-9300. A live person answers. We ask what’s happening with the door, what brand it is, and roughly when it was installed. If you don’t know the model, we’ll help you find the little etched label on the glass or the sticker on the hinge edge.
- 2
We come out and diagnose in person. Photos only tell us so much. We need to feel the door move, check the frame with a level, and look at how the threshold is sitting. This is when we figure out repair versus replace.
- 3
We give you a written price. Line-item breakdown. Parts, labor, disposal, trim. You sign it, that’s the number. We don’t add surprise line items when the door is already out.
- 4
We source the parts. Some ECO glass and door components are long out of production. We’ll tell you what’s OEM, what’s OEM-equivalent, and what we’d actually recommend. If a better aftermarket option exists, we say so and show you the spec difference.
- 5
We do the install. Outside door goes out, new door goes in, frame is shimmed and squared, insulation is packed, trim goes back, and the whole assembly is tested for operation, lock engagement, and air infiltration.
- 6
We walk it with you and photo-document everything. Before-and-after photos are part of the job. Your final invoice is digital, and the 365-Day Done Right Promise is in writing: if the work isn’t right, we make it right for a full year, parts and labor.
What ECO Window Systems Door Replacement Costs in Fort Worth
Here’s straight talk on the numbers. These are installed ranges for Fort Worth, not national averages or vague ballparks.
- Single ECO entry door replacement (basic fiberglass or steel slab, no sidelites): $1,450 – $2,400 installed.
- ECO entry door with one sidelite: $2,200 – $3,600 installed, depending on glass package and frame condition.
- ECO-8 sliding glass door replacement (6-foot): $1,900 – $3,200 installed, with aftermarket or OEM-equivalent door panel.
- ECO-9 sliding glass door replacement (8-foot or double-panel): $2,800 – $4,200 installed.
- Glass-only replacement on existing ECO door frame: $350 – $650 per sash, plus service call if it’s a single-unit job.
- Frame rebuild due to rot or settling (partial tear-out, new sill and jamb work): Add $300 – $800 to the door cost depending on scope.
What moves the price: the door size, whether it’s impact-rated, whether the frame is reusable, and whether the existing opening requires structural correction. Fort Worth homes on clay soil see more frame movement than properties on rock, so older homes in Fairmount and Ryan Place often need more prep work than newer builds in Alliance or Walsh. We’ll tell you exactly where your job lands. Call (682) 354-9300 and we’ll come measure and give you a number you can actually use.
Why Fort Worth Homeowners Call Juniper Windows Fort Worth for ECO Window Systems Work
We’re the windows-and-doors specialist inside the Relay Home Co. family, and we’ve been at this since 2001. That’s more than two decades of watching Fort Worth weather do things to door frames. We work on eight product lines, including ECO Window Systems, PGT, CGI, CWS, and ES Windows. When your ECO door isn’t worth saving, we can show you what a Therma-Tru or ViewLux replacement would cost side by side, so you’re never boxed into one brand’s pricing.
Sean Mackey runs the Fort Worth crew. He learned this trade at Los Angeles Trade-Technical College and has spent nearly twenty years on real job sites, including door replacements across Tarrant County. His standard is simple: get the numbers right up front, and the install takes care of itself. Every job is background-checked, uniformed technicians, a written price before anything starts, and the 365-Day Done Right Promise covering parts and labor for a full year. If a repair fails, the second visit is free.
FAQs
Most ECO Window Systems products carry a limited warranty, but coverage depends heavily on whether the original installation was registered and whether the failure is a manufacturing defect versus environmental wear. We can’t file warranty claims on your behalf since Juniper Windows Fort Worth is an independent service provider, not an ECO-authorized dealer. We can, however, pull the door specs, identify the exact component that failed, and give you the documentation you’d need to approach the manufacturer. Call (682) 354-9300 and we’ll help you figure out if a claim makes sense before you spend money on a repair.
Some yes, some no. Glass packs and basic hardware for the ECO-8 and ECO-9 are still available from several suppliers. But early-gen rollers, specific sill extrusions, and certain lock assemblies for the ECO-6 series are out of production and getting scarce. When OEM parts aren’t available, we source OEM-equivalent components and tell you what we’re using and why. In some cases, the part costs more than the door is worth, and that’s when we’ll tell you replacement makes more sense than repair.
If the frame is square, the glass is intact, and it’s just rollers, seals, or hardware, repair usually wins. If the frame has moved from foundation settling, the sill is rotted, or the door has been leaking for more than a season, replacement is typically the cheaper long-term move, especially in Fort Worth’s clay-heavy soil. We won’t push you into a full replacement when a $200 roller job gets you another five years. Call us for an honest read before you commit either way.
Most ECO door replacements happen within 3 – 7 business days of us measuring and giving you a written quote. If the door size is standard and we’re pulling from stock inventory, it can be faster. Fully custom openings or special glass packages add time. You’ll know the install date before you sign anything, and we show up when we say we will.
No. Door replacement isn’t a same-day job if it’s done properly. Removal, frame prep, installation, trim work, and testing take time, and we’d rather do it right than fast. Emergency board-up or temporary securing of a broken door is a different conversation. Call us and we’ll tell you how soon we can get on the calendar.
Get Your ECO Door Replaced the Juniper Way
If your ECO Window Systems door has failed, warped, or just isn’t doing its job anymore, let’s fix that. Call (682) 354-9300 and we’ll schedule a free diagnostic visit, measure the opening, and hand you a written price with no surprises. A live person answers, every time. Written quote before any work starts. Done right or we make it right for 365 days, in writing.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.