New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Rendon
If you’re searching for window installation in Rendon, you’re likely dealing with one of three things: windows that bind in out-of-square openings, original single-pane glass that leaks conditioned air, or hail damage from the last spring storm. A mid-range Rendon Window Replacement typically runs $650 to $1,400 per opening installed, depending on material and whether the framing needs custom shimming. Most jobs take one to three days on site once custom orders arrive. Call (682) 354-9300 for a written, line-item quote before anything gets ordered.
We work in Rendon weekly. Our crews know the unincorporated county pockets, the pier-and-beam ranches off Rendon Road, and the newer subdivisions where HOA rules govern glass specs. That local knowledge matters when the wrong window order adds six weeks to your project.
Why Juniper Windows Fort Worth Is Rendon’s Preferred Window Installation Company
We’ve replaced windows on enough Rendon properties to know what separates a clean install from a callback: flashing details, shimming, and honest scheduling. Homeowners around Rendon keep calling us back because our written price does not move. Sean Mackey runs the operation, and every project carries the 365-Day Done Right Promise: if the install is not right, parts and labor are covered in writing for a full year.
Rendon sits partly outside municipal code enforcement, which means Tarrant County rules apply, and familiar territory beats a learning curve. Our Window Installation team has handled everything from 1980s custom ranches to new suburban builds in this exact patchwork. The Relay Visibility Guarantee applies to every Rendon job: live arrival time, before-and-after photos, and a digital invoice you can pay from your phone. You know exactly who is walking up your driveway because every technician is background-checked and uniformed.
We answer the phone live, around the clock. When a spring storm postpones a crew or a delivery runs late, you get a real person at (682) 354-9300, not a voicemail maze.
Casement Windows in Rendon
Casement windows are the workhorse replacement for Rendon’s older custom ranches, especially where hail has already chewed through aluminum storm frames. A casement install in Rendon typically runs $850 to $1,600 per opening, depending on size, glass package, and how much shimming the existing jamb needs. These windows hinge on one side and crank outward, which gives a tight seal against the high humidity and wind gusts common in this part of North Texas.
Why Rendon Ranches Favor Casements Over Double-Hungs
Older pier-and-beam homes settle unevenly, and double-hungs bind in out-of-square jambs. Casements seat against the frame with compression hardware, so minor settlement does not wreck the seal. We saw this on a 1980s custom ranch off Rendon Road: original wood-framed single panes and hail-battered aluminum storms came out, PGT impact-rated casements went in, and every opening needed custom extension jambs and butyl tape flashing to stop the humidity-driven air leaks that had rotted the old sills.
Impact-Rated Casements and the Spring Storm Calendar
If you’re in a wind-borne debris zone under Tarrant County’s adopted code, standard annealed glass is a bad bet. One hailstorm can shatter a pane and dump water into the wall cavity. Impact-rated casements from PGT or ES Windows carry a heavier price, but a single claim often covers the difference. Order by February if you want them in before late-March storm season.
Double Hung Windows in Rendon
Double hung windows are what most Rendon homeowners picture when they think “replacement windows.” Both sashes move, which is practical for the cross-breeze setups common in older ranch layouts. Expect $700 to $1,350 per opening in Rendon for a quality vinyl or aluminum-clad double hung, installed with proper exterior flashing. The catch locally? Those pier-and-beam homes with settled framing make out-of-square openings the default, not the exception.
Custom Shimming on Out-of-Square Openings
In a newer slab home, a double hung drops into a square rough opening and gets screwed off. In older Rendon ranches, the jamb has usually drifted a quarter inch or more. Installing new double hungs into out-of-square pier-and-beam openings without shimming leads to binding sashes and failed seals within the first year. We re-shim jambs and re-trim sashes on nearly every older ranch we touch here. That custom work is not an upsell on our quotes; it is line-itemed so you see exactly what you pay for.
When Double Hungs Beat Casements
Double hungs work well in bedrooms where an outward-cranking casement interferes with a walkway or a window AC install. They also match the traditional sightlines of Rendon’s 1970s and 1980s custom builds, which matters if you plan to resell. ViewLux and ECO Window Systems both make double hung lines we install regularly, and we can match existing interior trim profiles so the new units look original to the house.
Trusted Brands We Service in Rendon
We stock and install windows from eight product lines, and on a typical Rendon job we’re quoting PGT for impact-rated casements, ViewLux for energy-efficient double hungs, and Therma-Tru for matching entry doors. Mr-Glass and ES Windows are on the shelf for high-end architectural work. Because our Dallas-Fort Worth office runs dispatch and scheduling for Rendon locally, we can pull most standard replacement parts within a day or two instead of waiting on a factory shipment. That shortens the downtime between tear-out and trim.
Common Window Installation Problems We See in Rendon Homes
- Out-of-square pier-and-beam openings. Decades of settling under Rendon’s clay-heavy soil leave even well-built ranches with jambs that are not square. A generic install without shimming means sashes bind, seals tear, and the window fails within a year. Our crews shim and re-trim as standard practice on these homes.
- Hail-damaged aluminum storm windows over new glass. Some homeowners try to keep their old aluminum storm frames and just swap the glazing. Reusing old aluminum storm window frames over new low-E insulated glass units traps humidity between the glazing layers, causing fogging and mold on the interior sash. Those storms should come off entirely.
- Flawed flashing details from past replacements. North Texas rain comes hard and horizontal during spring storms. Poorly flashed windows let water into the wall cavity around the sill, and by the time you see the water stain on the drywall inside, the framing is already rotting. Butyl tape at the rough opening and proper sill pan flashing are non-negotiable on our installs.
- Standard annealed glass in wind-borne debris zones. Specifying standard annealed glass instead of impact-rated glazing means a single spring hailstorm can shatter panes and let water pour into the wall cavity. If you’re in the unincorporated county areas where Tarrant County applies the stricter wind-borne debris rules, impact-rated glass is not an upgrade; it is the code.
Pricing for Window Installation in Rendon, TX
Here is a realistic picture of window installation pricing in Rendon today:
| Window Type | Typical Installed Cost (Per Opening) |
|---|---|
| Single & Double Hung | $700 – $1,350 |
| Horizontal Roller | $450 – $950 |
| Casement | $850 – $1,600 |
| Awning & Hopper | $500 – $1,000 |
| Picture / Fixed | $600 – $1,400 |
| Bay & Bow | $2,800 – $6,500 |
| Garden Window | $2,200 – $4,800 |
| 3-Panel Sliding | $1,900 – $4,200 |
These ranges reflect what we actually quote in Rendon: the lower end covers a standard vinyl unit in a square opening, and the higher end covers impact-rated glass, custom shimming, architectural millwork, or out-of-square pier-and-beam openings. Custom-sash trims and extension jambs add real labor because they are real labor. Our written quote separates material, tear-out, shimming, flashing, and trim so nothing hides in the lump sum. Call (682) 354-9300 and we’ll send a line-item price in writing before any order goes to the factory.
We Also Serve Cities Near Rendon
Our crews run Rendon jobs every week, and we regularly schedule installs in Fort Worth, Saginaw, Haltom City, and Keller from the same scheduling desk. If you own a rental or a multi-property portfolio spread across those cities, one written quote covers the whole scope. Call (682) 354-9300 and tell us what you’re replacing.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Rendon
Yes, in most cases. Unincorporated Rendon falls under Tarrant County’s adopted building codes, not a municipal building department, and the county applies wind-borne debris requirements to many residential structures. The practical difference is enforcement: Rendon has no city inspector walking your job, which means the responsibility for code-compliant glass and flashing sits entirely with the contractor you hire. We write the code path into every quote.
Because decades of settling on pier-and-beam foundations leave jambs out of square. In older Rendon ranches, out-of-square openings are so common that every double hung install is a custom trim job: we re-shim the jamb, cut extension jambs where the wall plane has shifted, and re-trim the interior to keep sightlines aligned. Skip that work and the sashes bind within months. Call (682) 354-9300 if you want a real quote on the trim scope, not a vague allowance.
Six to eight weeks is the honest answer. Impact-rated units from PGT and CGI are factory-built to spec, and spring is the busiest ordering season for every dealer in North Texas. If you want glass installed before late March, your order should be in the factory queue by early February. We do not promise shorter lead times than the factory can deliver; we tell you the real date and put it in writing.
Usually not, and we recommend against it for most homes. The original wood frames are often rotted at the sill from years of humidity intrusion, and retrofitting impact-rated glazing into a 40-year-old frame does not fix the air-sealing problem. There are narrow cases where a sash-only replacement works, but a full-frame replacement with butyl tape flashing is the more durable fix. We will show you both options and price both.
Ordering after the framing is already torn open. On high-end window jobs, lead times for custom millwork and architectural glass set the calendar, not labor. If you want specialty casements from ES Windows or custom trims to match existing cabinetry, those pieces are ordered weeks before any crew arrives. Homeowners who wait on the order sign-off end up with open walls and no windows in the June heat. We lock the price in writing at the order stage, not after the glass shows up.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Rendon and the surrounding North Texas communities.
Get Your Written Rendon Window Quote
You should not have to call to get a ballpark, but you will want to call for the written number that locks the job. We serve all of Window Installation in Rendon with fixed pricing, real arrival times, and before-and-after photos so you know exactly what got done. Call (682) 354-9300 and a live person answers, day or night. The quote is free, the price is written, and the work is covered in writing for 365 days.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.