New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Door Replacement Across Everman
Door replacement in Everman typically runs $1,200 to $4,800 for a standard entry door with full jamb rebuild, and most jobs are completed in a single day once the door arrives. That’s the honest range for this market, where mid-century brick ranch homes dominate and original wood frames have had six-plus decades to warp under North Texas weather. We’re Juniper Windows Fort Worth, and our Door Replacement team works in Everman every week, so we know exactly what these 1950s and 60s homes throw at a new door. Call (682) 354-9300 and you’ll get a real person, a written price, and a crew that knows the difference between a cosmetic swap and a door that actually seals against storm-driven rain.
Why Juniper Windows Fort Worth Is Everman’s Preferred Door Replacement Company
Everman homeowners call us because we show up when we say we will, with a locked price and a crew that’s done this work on the same streets you live on. We’re part of the Relay Home Co. family, founded in 2001, and every job runs on the same standard: a written price before any work starts, and the 365-Day Done Right Promise covering parts and labor for a full year after installation. Sean Mackey leads our team with a simple rule: document everything, commit in writing, and stand behind it.
Our technicians are background-checked and uniformed, so when someone knocks on your door near Johnson Park or Enon Avenue, you know who it is and why they’re there. We answer the phone 24/7 with a live person, not a voicemail queue. And because we stock parts for the Everman housing stock we see constantly – warped jambs, rusted thresholds, slab foundations that have settled – we don’t waste your time diagnosing what we already know from the last job three blocks over.
Interior Door Installation in Everman
Interior Door Installation in Everman means replacing hollow-core or damaged interior doors in homes where decades of humidity swings have caused panels to swell, stick, or scrape against 60-year-old frames. A single pre-hung interior door replacement in Everman runs $300 to $700 depending on the door style and whether the existing jamb is salvageable. Most Everman jobs involve three to six doors, and we price those at the same per-door rate with a small savings on the combined trip.
Pre-Hung Door Replacement
When an Everman home’s interior door frame has shifted with the foundation or the casing is cracked, a slab swap won’t sit square. We remove the old jamb, install a pre-hung unit, shim it level, and trim it out so the door swings clean and latches without wrestling.
Matching Mid-Century Trim Profiles
Everman’s 1950s and 60s homes often have trim profiles you can’t find at a big-box store. We match the existing casing dimensions and profile so a new door doesn’t look like an add-on in a house that’s otherwise original.
Door Installers in Everman
Door Installers in Everman handle the full replacement: removal of the old slab and jamb, inspection of the rough opening, correction of any settling or water damage behind the casing, new door installation, hardware, weatherstripping, and sill pan. Entry door installation in Everman runs $1,500 to $3,800 for a standard steel or fiberglass door with a new jamb and threshold, depending on glass options, hardware, and whether the opening needs reframing. Our crews do this work without subcontracting, so the person who measures is the person who installs.
Jamb and Threshold Rebuilds
Everman’s older homes rarely need just a slab. Freeze-thaw cycles twist the wood jamb, the threshold cracks, and the door stops sealing. We rebuild the jamb to square, install a continuous sill pan, and set the threshold so water can’t run under the door during a July gully-washer.
Storm-Rated Entry Systems
Some Everman homeowners want a door that meets a specific design pressure rating for wind and debris. We install impact-rated and high-DP-rated systems from Therma-Tru and other manufacturers, with documentation you can hand to your insurance agent. That paperwork matters when you’re chasing a wind mitigation credit.
Trusted Brands We Service in Everman
Everman homeowners get access to eight product lines, and for door work specifically, we lean on Therma-Tru fiberglass systems, PGT impact-rated doors, and ViewLux for contemporary glass entryways. CGI and CWS carry storm-rated options for homes where wind-load documentation matters. We keep common Everman sizes and hardware in local stock, which means fewer multi-week waits for a standard 36-inch entry door. If you have a specific brand or model in mind, we’ll quote it against a comparable option so you can see the price difference before you commit. Every quote is written, itemized, and locked before installation starts.
Common Door Replacement Problems We See in Everman Homes
- Warped original wood jambs: Everman’s mid-century homes near Johnson Park still have their original entry door frames, and 60 years of freeze-thaw cycling leaves them twisted enough that the deadbolt won’t throw. A new slab in that old jamb solves nothing.
- Rusted steel thresholds on settled slabs: Slab foundations move, and when they do, the threshold is the first thing to gap. Storm-driven rain finds that gap and wicks into the subfloor, which is how you get rot and termites in a house that otherwise looks dry.
- Single-pane sidelights and transoms: Those original glass panels leak air and water and do nothing for July heat gain. Replacing the door but keeping a 1960s sidelight means your new door is only as good as the glass next to it.
- Interior doors stuck from humidity cycles: Everman’s humid summers and dry winters make wood swell and shrink. Doors that stick in August and swing freely in January are telling you the frame is out of square and the slab is warped beyond trim adjustment.
Pricing for Door Replacement in Everman, TX
A slab-only entry door replacement in Everman starts around $900 to $1,400, but that’s the number to be careful with. Most Everman homes need jamb work, and that’s where the honest price lands: $1,500 to $3,800 for a complete entry system with a new jamb, threshold, weatherstripping, and storm-rated door. Add $400 to $900 for sidelight glass replacement. Interior doors run $300 to $700 each when done as a pre-hung replacement. What changes the price here most is whether the rough opening is square and dry or whether our crew is rebuilding framing and flashing. That’s not a surprise upcharge – it’s written into the quote before we start. Call (682) 354-9300 for a free estimate with a line-item price you can keep.
We Also Serve Cities Near Everman
Our Everman crews regularly work in Fort Worth, Saginaw, Haltom City, and Keller, so the same written pricing and 365-Day Done Right Promise applies wherever your door project sits. If you’re in a neighboring community, call us and we’ll schedule the same way we do for Everman: live arrival time, photo updates, and a digital invoice.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Door Replacement in Everman
There’s no Everman-specific ordinance mandating a design pressure rating on residential entry doors, but insurance companies increasingly expect documented wind resistance for premium discounts, and Texas building codes set baseline structural requirements based on the region’s wind zone. A door rated for a design pressure of DP-40 or higher, with a jamb and sill pan installed to match, is the practical standard for Everman’s storm exposure. We can specify the DP rating on your quote and provide the manufacturer documentation. Call (682) 354-9300 if you want to know what your current door is rated for – the answer is usually “it isn’t documented.”
Ask for the manufacturer’s design pressure certification for the door, and make sure the quote lists a new jamb, continuous sill pan, and weatherstripping as separate line items. Those are the three features insurers look for when verifying wind mitigation. We provide that paperwork with every entry door install, and Sean Mackey’s team will walk you through what your agent needs. A quote that says “door replacement” with no DP rating and no mention of the sill pan won’t hold up in an insurance review.
It helps most when the sticking is caused by a warped slab or a door that was trimmed poorly over the years, but humidity-related swelling is often a whole-house issue tied to air sealing and HVAC balance. Replacing a swollen hollow-core door with a pre-hung unit gives the door room to move through seasonal cycles without binding. If every interior door in your Everman home sticks in August, the real fix may be air sealing the envelope first – we’ll tell you straight, and if door replacement alone won’t solve it, you’ll hear that on the estimate call.
A cheap quote is a slab swap: new door, old jamb, old threshold, no documentation, and no attention to the water path under the door. A compliant quote includes a new jamb squared to the rough opening, a continuous sill pan, a threshold that slopes away from the house, weatherstripping that compresses on all four sides, and a written DP rating for the door. The difference in price is usually $600 to $1,200, and in Everman’s freeze-thaw climate, the cheap version starts failing within two years. Call (682) 354-9300 and we’ll show you both options on paper so you can decide with real numbers.
Original entry doors on Everman’s 1950s and 60s homes have almost no insulation value and often leak enough air around the jambs to feel like an open vent. A new insulated fiberglass or steel door with proper weatherstripping can cut the air infiltration at that one opening by 80% or more, which shows up most on west-facing entries that catch the 3 p.m. July sun. The bigger effect is comfort: the entryway stops radiating heat into the living room. For exact energy numbers on your specific door, call (682) 354-9300 and we’ll measure the existing opening and talk through your options.
Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Everman door replacement projects with written pricing and the 365-Day Done Right Promise.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.