Awning & Hopper Windows in Fort Worth, TX

Awning & Hopper Windows in Fort Worth, TX

Awning and hopper windows cost between $450 and $1,200 per window installed in Fort Worth, depending on size, glass package, and frame material. Both styles hinge rather than slide, which makes them unusually good at keeping rain out while still letting air in, a real asset during North Texas downpour season. At Juniper Windows Fort Worth, we install both styles with a written price locked before any work begins and back the installation with our 365-Day Done Right Promise. If you’re still deciding whether these fit your home, our Window Installation in Fort Worth guide walks through the full range of options we carry.

Awning windows hinge at the top and open outward from the bottom, so the sash acts like a small roof over the opening when it’s open. Hopper windows flip that: they hinge at the bottom and tilt inward from the top. Awning windows are common in Fort Worth bathrooms, kitchens, and any wall where you want ventilation without giving up privacy. Hopper windows show up most often in basements, garages, and occasionally in bathrooms where the window sits high on the wall. Both are compact, mechanically simple, and seal tighter than a sliding window of similar size, which matters when a Fort Worth July pushes 104 degrees and your AC is already working hard.

Call (682) 354-9300 and you’ll get a live person, not a voicemail queue. Tell us what you’re working with and we’ll give you a straight answer on timing and a ballpark price before anyone books a visit.

When You Need Awning & Hopper Windows

Most homeowners don’t start out searching for “awning windows.” They start with a problem. Here’s what typically leads Fort Worth homeowners to this style:

• You want to leave a window open during spring thunderstorms without soaking the sill. An awning window’s top hinge means rain hits the sash and runs off instead of blowing in. In neighborhoods like Ryan Place or Mistletoe Heights, where older homes often lack good cross-ventilation, this is a year-round benefit.
• Your bathroom window is short, wide, and perpetually fogged or painted shut. Short, wide openings are exactly what awning windows are built for. We see this constantly in 1950s and 1960s ranch homes across Wedgwood, Eastwood, and Handley, where original steel casement or wood awning units have finally given up.
• You need ventilation in a high-up or awkward spot. A window over a kitchen sink, above a bathtub, or high on a garage wall is hard to reach. An awning window with a crank handle solves that. A hopper window in a basement or utility room gives you airflow without a slide track that collects dust and debris.
• Your sliding windows leak air around the seals. Sliders depend on a brush or felt seal along a horizontal track. Over time, that seal wears and Texas dust works into the track, and air starts moving through. Hinged windows compress against a gasket all the way around, so they often seal more tightly on smaller openings.
• You’re replacing a window in a spot where a slider or double-hung doesn’t make sense. If the opening is wider than it is tall, a double-hung looks stretched and awkward. Awning windows are proportioned for that footprint, which is why they’re a common replacement in mid-century Fort Worth homes that were built with them originally.
• You want functional ventilation without sacrificing security. An awning window open a few inches still doesn’t give anyone a handhold or a gap large enough to climb through. For a front-facing bathroom window in Arlington Heights or Fairmount, that’s a meaningful difference.

Our Awning & Hopper Windows Process

Here’s how a typical Window Installation for an awning or hopper window goes with Juniper Windows Fort Worth, from first call to final walkthrough:

1. You call or request a visit online. A live person answers, asks a few questions about the opening size, the room, and what’s wrong with the current window. We book a time that works for you, and you’ll get a live arrival time on the day of the appointment, not a four-hour window.
2. We measure and assess the opening. The technician checks the rough opening dimensions, the condition of the surrounding framing, and whether the existing window has any water damage or rot. Fort Worth’s freeze-thaw cycles and occasional hail events aren’t kind to wood frames, so this step matters.
3. You get a written price before any work starts. Not a verbal range, not an estimate that might shift at the door. We quote the window, the install labor, any trim work, and disposal, in writing, line by line. That number doesn’t change unless you add to the scope.
4. We order the window and schedule installation. Most awning and hopper windows from our product lines arrive within two to four weeks, depending on size and glass options. We’ll tell you the real lead time when we quote, so there’s no surprise delay.
5. Installation day. A background-checked, uniformed technician arrives at the scheduled time. The old window comes out, the opening gets inspected and prepped, and the new window goes in, gets insulated properly around the frame, and gets sealed and trimmed. You’ll see the finished result in before-and-after photos.
6. You pay from a digital invoice. No paper envelope, no check that floats in the mail. You get a link, review the final total against the written quote, and pay from your phone. The 365-Day Done Right Promise kicks in from the day we finish: if anything isn’t right within a full year, parts and labor, we make it right.

Awning & Hopper Windows Pricing in Fort Worth

In the Fort Worth market, you should expect a quality awning or hopper window to run from $450 to $1,200 per window installed as of 2025. The spread comes down to a few factors: glass package, frame material, size, and whether the opening needs any structural repair before the new unit goes in.

Here’s a closer look at what drives the price:

The most common install we do is a white vinyl awning window with Low-E glass in a bathroom or kitchen, which usually lands between $550 and $750 installed. Hopper windows for basements and garages tend to be smaller and less expensive, often $400 to $600 installed.

What we won’t do is throw out a low number to get a signature and then “discover” problems after the old window is out. The written price you approve is the number you pay. If we do find hidden rot or a framing issue mid-install, we stop, show you photos, explain what we’re seeing, and give you a number for the repair before proceeding. That’s the whole point of a written price and a one-year parts-and-labor guarantee: no surprises on either side.

Product lines we install include ES Windows, CGI, and CWS, depending on the opening size, whether you want Bay & Bow Windows or another style, and whether you want impact-rated glass. Each line has different strengths, and we’ll walk you through what actually matters for your specific wall and sun exposure instead of reading a catalog at you.

FAQs – Awning & Hopper Windows

Should I choose an awning or a hopper window for my Fort Worth home?

Awning windows hinge at the top and open outward, making them ideal for above-counter and above-tub spots where you want rain protection and easy crank operation. Hoppers hinge at the bottom and tilt inward, which suits basements, garages, and high wall placements where you want airflow without the sash projecting outside. If you’re replacing an existing unit, the easiest move is to keep the same hinge style, though some Fort Worth homeowners switch a hopper to an awning in a bathroom that faces a street for added privacy and weather protection. Call (682) 354-9300 and tell us the room and the opening size, and we’ll tell you which direction makes sense. Free estimates, no charge for the advice.

How much does an awning window cost in Fort Worth?

Most awning windows in Fort Worth run $450 to $1,200 installed, with the typical vinyl unit with Low-E glass landing between $550 and $750. The variables are size, frame material, and whether you want impact-rated glass, which can add $150 to $350 per window. We give every quote as a written line-item price before work starts, so the number you approve is the number you pay. Call (682) 354-9300 for a free estimate on your specific opening.

Are hopper windows good for basements in Fort Worth?

Yes, hopper windows work well in basements and below-grade openings because they tilt inward and don’t require exterior clearance for a crank or sash arm. In Fort Worth, where basements are less common than in the Midwest but do exist in older neighborhoods, hoppers are also a practical choice for utility rooms and crawlspace venting. They seal well, are mechanically simple, and cost less than most other operable window styles, usually $400 to $600 installed. We can measure and quote the same day you call.

Can I leave an awning window open when it rains?

Yes, and that’s the main reason Fort Worth homeowners choose them. The sash tilts out from the top, so an open awning window forms a canopy that sheds rain away from the opening. During a typical North Texas thunderstorm, you can keep a bathroom or kitchen awning window cracked for airflow without worrying about water streaming onto the sill or floor. This is a different animal from a double-hung, where an open sash during rain invites water in. If you’re tired of closing windows every time a cell rolls through Tarrant County, this is the window style that solves it. Call (682) 354-9300 and we’ll talk through what fits your wall.

How long does it take to get an awning or hopper window installed?

From the day you approve a written quote, most awning and hopper windows take two to four weeks to arrive from the manufacturer, and installation itself is usually a half-day or less for one or two windows. We’ll give you a realistic lead time at the quote stage based on the product line and glass package you choose, and we’ll schedule the install for a specific day with a live arrival time when the technician is on the way. Your written price stays fixed throughout.

Why Fort Worth Homeowners Choose Juniper for These Windows

Awning and hopper windows are simple, but installing them correctly isn’t just a matter of screwing a frame into a hole. A window that doesn’t get sealed and insulated properly around the rough opening will leak air, sweat in winter, and let water in during storm season. We’ve been installing Casement Windows and other replacement windows in Texas since 2001, and every job includes a written price before work starts and the 365-Day Done Right Promise on parts and labor for a full year.

We’re part of the Relay Home Co. family, which means every project runs on the Relay Standard: book in a tap, live arrival time, before-and-after photos of the completed work, a written price, and a digital invoice you can pay from a link. Our technicians are background-checked and uniformed, so the person at your door is someone you can identify at a glance. And if you call at midnight with a question, someone answers. That’s not a perk. That’s the baseline.

If you’re looking for a specific brand, we install ES Windows, CGI, and CWS, among the eight product lines we carry, and we’ll match the right window to the actual opening and sun exposure rather than selling you whatever’s in stock. A west-facing bathroom in Benbrook needs different glass than a north-facing garage window in Saginaw, and we’ll tell you if Garden Windows or another style matters for your wall.

Get a free estimate at (682) 354-9300. A live person picks up. You’ll get a straight answer on pricing, a real lead time, and zero pressure to sign anything before you’ve seen the number in writing.

Written by Sean Mackey, Owner at Juniper Windows Fort Worth, serving Fort Worth.