VLX 500 Sliding Window

VLX 500 Sliding Window in Fort Worth, TX | Juniper Windows Fort Worth

The VLX 500 Sliding Window is a high-performance aluminum sliding system built for homeowners in Fort Worth who want clean sightlines, easy operation, and a frame that won’t warp or swell in Texas heat. With a 1.97-inch profile and a 0.079-inch wall thickness, it’s slim enough to feel modern and strong enough to hold up for decades. Juniper Windows Fort Worth is an authorized ViewLux installation partner, which means you get the product backed by an installer who stands behind the work, not just the glass. Call (682) 354-9300 for a free on-site measurement and a written line-item quote.

Call (682) 354-9300

Product Overview – VLX 500 Sliding Window

The VLX 500 is what architects reach for when they want a horizontal run of glass without chunky frames interrupting the view. It’s a high-performance aluminum sliding system with a slim profile and an effortless glide, available in 2-track and 3-track configurations. The 3-track version lets you open two panels and leave the third fixed, which is a practical setup for wide openings in Fort Worth living rooms and patios that face the afternoon sun.

The series sits well in a few Fort Worth architectural camps. Modern builds in Arlington Heights and Fairmount get the clean, minimal look they’re after. Mid-century ranches in Wedgwood appreciate the horizontal emphasis. And newer construction in Walsh or Chisholm Trail Ridge uses the VLX 500 to frame outdoor space without visual clutter. The frame is aluminum, which matters in this part of North Texas: aluminum doesn’t swell with humidity like wood, doesn’t sag under repeated thermal cycles, and doesn’t require the maintenance schedule that painted wood frames do. The 0.079-inch wall thickness gives the extrusion enough structural backbone to resist flexing when panels are operated daily, and the 1.97-inch profile width keeps the whole assembly compact enough for replacement work without heavy reframing. Buyers choose this series because it feels solid when you move it. The track system rolls without dragging, even on wide 3-track units, and the hardware stays quiet over years of use.

Technical Specifications

Here’s the VLX 500 Sliding Window at a glance. We’ve reworded the manufacturer’s spec sheet in plain terms so you can compare it against other products without a decoder ring.

• Frame material: Extruded aluminum with a wall thickness of 0.079 inches
• Profile width: 1.97 inches, measured across the frame face
• Track configurations: 2-track (one fixed panel, one sliding panel) and 3-track (two sliding panels, one fixed or venting configuration)
• Glass options: Clear, frosted, Low-E, tempered, laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Retractable screen or standard sliding screen
• Performance ratings: NFRC-rated energy performance with thermal break technology; installed to AAMA 2400/2410 standards
• Perimeter sealing: AAMA 812 compliant low-expansion foam sealant on all perimeter joints

Performance Features

Thermal Efficiency – The VLX 500 uses thermal break technology in the frame, which creates a barrier between the inside and outside aluminum faces. That break cuts conductive heat transfer, and with Low-E glass specified for Fort Worth’s climate, the window can meet NFRC energy performance ratings that keep cooling bills in check through July and August.

Acoustic Performance – Sliding windows don’t have to mean noise bleed. Laminated glass is available for the VLX 500, and the difference it makes on a Fort Worth street with regular traffic or a nearby train line near the Near Southside is noticeable. The laminated interlayer dampens sound transmission and adds meaningful day-to-day quiet.

Airtightness & Weather Seal – The track design and perimeter weatherstripping work together to limit drafts. On our Fort Worth installations, every perimeter joint receives AAMA 812 compliant low-expansion foam sealant, which fills voids without bowing the frame. That detail is where most heat and air leakage actually happens on a sliding window, not through the glass.

Waterproofing – North Texas gets real thunderstorms, and a sliding window’s weakest point is always the track. The VLX 500 has a weep system that directs water out of the track, and our installation process includes a perimeter water test before we call a job done. Proper sloping, proper flashing, proper sealant placement. No shortcuts.

Wind Resistance – Fort Worth sees wind-load requirements on new construction that generic window packages often ignore. The VLX 500 is engineered and can be wind-load rated for local climate requirements. We verify the spec on every order based on the opening size and the home’s location.

Security & Hardware – The sliding panels ride on a track with a locking mechanism that resists lifting out when closed. For extra security and impact resistance, laminated glass is the option we recommend most often in Fort Worth, especially on ground-level windows or homes where kids practice sports against the back of the house.

Color & Glass Options

The VLX 500 comes in six finishes. Premium Black is the one we see most in Fort Worth right now, particularly on modern farmhouse builds across Tarrant County where black frames against white brick or stucco read as crisp and intentional. Pure White suits traditional brick homes in areas like Ridglea Hills or Monticello, where the goal is for the window to blend into the trim rather than stand out. Anodized Silver is the honest-aluminum look, popular in commercial or minimalist straights and increasingly on mid-century modern rehabs. Bronze warms up the frame without going dark, and pairs well with Texas limestone. Champagne is a light warm tone that works in transitional interiors. Teak Wood gives you the look of stained wood from a distance but performs like aluminum in every way that matters in Texas.

On glass, Low-E is our default recommendation for Fort Worth: it reflects a meaningful share of radiant heat before it enters the room. Clear works for covered porches or sunrooms where you want maximum light. Frosted is a solid choice for bathrooms or sidelight placements where privacy matters more than view. Tempered glass is code-required in certain locations, like within 24 inches of a floor or adjacent to a pool. Laminated glass adds safety, sound dampening, and impact resistance in one sheet.

Installation by Juniper Windows Fort Worth in Fort Worth

A sliding window is only as good as the day it went in, and in Fort Worth, that day matters more than most places. Clay-heavy soils move. Foundations shift. A window that isn’t installed level, plumb, and square will bind in the track a year after the house settles another fraction of an inch. We’ve pulled out poorly installed sliding windows in Fort Worth where the panel wouldn’t roll past the halfway point.

Our installation process starts with a pre-install inspection of the opening, the existing flashing, and any water intrusion evidence. From there, we shim and set the VLX 500 level and plumb before fastening. Every perimeter joint gets AAMA 812 compliant low-expansion foam sealant, which fills the gap without expanding hard enough to warp the track. Flashing is layered to shed water outward, not trap it. After the interior and exterior trim are in place, we run a water test on the sill and track, then clean up the glass, the tracks, and the job site. The whole process complies with AAMA 2400/2410 installation standards.

Here’s the practical part: the ViewLux manufacturer warranty assumes correct installation. An improperly set track, a skipped flashing detail, or a sealant failure at the rough opening is how warranty claims get denied. When Juniper Windows Fort Worth installs the VLX 500 in Fort Worth, you have one accountable party for the product and the installation. If something’s not right three years in, you call us, not a manufacturer’s 800 line. Call (682) 354-9300 to schedule a free estimate.

Frequently Asked Questions – VLX 500 Sliding Window

What is the lead time for the VLX 500 Sliding Window in Fort Worth? Most VLX 500 orders are ready for installation in three to five weeks from the date the order is confirmed, depending on glass type, finish, and track configuration. Custom sizes and laminated glass can push that toward six weeks. We confirm the timeline in writing when you place the order, and we don’t start the installation clock until the windows are physically in-hand at the Fort Worth warehouse. Call (682) 354-9300 for a current lead time on your specific configuration.

Does the VLX 500 qualify for energy tax credits? Qualification depends on the specific glass package and whether the window meets the current ENERGY STAR requirements for the South-Central zone. With Low-E glass and thermal break frames, most VLX 500 configurations clear the bar, but the exact credit hinges on your glass selection and the efficiency rating of the unit as built. We can walk you through which options give you the best shot at a credit during the estimate.

What warranty comes with the VLX 500 Sliding Window? The VLX 500 carries the ViewLux manufacturer warranty on the frame and glass, and Juniper Windows Fort Worth provides a workmanship warranty on the installation. The specifics of the manufacturer warranty depend on the glass package and finish you select, and our installation warranty covers the labor and sealing work for as long as we specify in your contract. We put warranty terms in writing before any work begins.

Can I customize the size of the VLX 500 Sliding Window? Yes, the VLX 500 is ordered to exact opening dimensions, not sold in stock sizes. That means it works for both new construction rough openings and retrofit replacements in older Fort Worth homes where nothing is perfectly square. We measure every opening twice before the order goes in.

How do I maintain aluminum frames in Fort Worth’s climate? Aluminum frames need very little maintenance compared to wood or vinyl. Wipe the tracks with a dry cloth every few months to keep them free of grit, and clean the glass with a standard non-abrasive cleaner. Fort Worth’s hard water can leave mineral spots on glass, so a vinegar-based cleaner helps if you notice buildup. The track rollers are designed to run without lubrication in normal conditions.

Get a Quote – VLX 500 Sliding Window in Fort Worth

If you’re pricing the VLX 500 Sliding Window in Fort Worth, start with a free on-site measurement from Juniper Windows Fort Worth. We’ll confirm your sizes, walk through glass and finish options that suit your home, and give you a written line-item quote with no surprise change orders. Call (682) 354-9300 to schedule yours, or request a call back through our website.

Written by the team at Juniper Windows Fort Worth, authorized ViewLux installation partner serving Fort Worth and surrounding Tarrant County.