New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Replacement in Fort Worth: What to Know First
We replace Mr-Glass doors throughout Fort Worth as an independent Mr-Glass service provider, and most jobs are completed within 3 to 7 business days once we confirm the door specs. A typical Mr-Glass door replacement in Fort Worth runs between $1,200 and $4,800 depending on the model, glass package, and whether we’re replacing the slab, the frame, or both. We’re not authorized by or affiliated with Mr-Glass, but our technicians work on their products regularly, and every job gets a written price before anything gets ordered or installed.
If you own a Mr-Glass door that’s fogged, warped, dragging, or leaking air around the frame, this page covers what’s actually happening and what replacement looks like. Call (682) 354-9300 to talk through your door with a live person, any hour.
How Mr-Glass Products Fail – and How We Fix Them
Mr-Glass doors are common in Fort Worth homes built from the 1990s through the 2010s, and after enough Texas summers, certain failure patterns show up across whole neighborhoods. Here’s what we see most often, and what we do about it.
- Insulated glass seal failure in the Mr-Glass Classic series. The Classic line shipped with double-pane units whose edge seals break down under Fort Worth’s temperature swings. You’ll see fog between the panes that comes and goes with the weather. Once the seal is gone, the glass keeps doing its job structurally but the clarity never comes back. We replace the full glass pack and reseal it, rather than patching a failed seal that will fail again.
- Framing rot at the bottom corners of Mr-Glass entry doors. This is a Fort Worth-specific problem driven by sprinkler overspray and hard rain hitting west-facing doors. The bottom rail wicks water upward into the stile joints and the wood composition starts to soften. If we catch it before the frame itself compromises, we can replace the slab and weather-strip and save the frame. If the corner has gone soft, we pull the whole unit.
- Roller and track wear on Mr-Glass sliding patio doors. The nylon rollers Mr-Glass used in their mid-range sliders flatten out over time, which makes the door drag, jump the track, or fail to latch. Slab replacement is rarely the right fix here, but once the rollers are gone and the door has been forced open and closed, the bottom rail often bends. That’s when full door replacement makes more sense than rebuilding hardware on a worn panel.
- Warped slabs on Mr-Glass doors with western exposure. We see more warped Mr-Glass door slabs in Fort Worth neighborhoods like Wedgwood and Ridglea Hills than anywhere else in Tarrant County, because those houses face the full afternoon sun. The slab bows and the weather-strip gaps open at the top or the strike side. Shim adjusting buys you a season, not a fix. A new slab with a higher-density core or a different glass package solves it.
- Failed multi-point locks on Mr-Glass hinged patio doors. The multi-point lock mechanism inside the slab has small linked rods that bind and snap after years of use. When the handle turns but the top or bottom bolt doesn’t engage, that’s the linkage. It’s repairable in many cases, but the parts are discontinued for several Mr-Glass series, so we’ll tell you honestly if replacement is the cheaper long-term move.
Our Mr-Glass Door Replacement Process
Get the numbers right up front, and the install takes care of itself. That’s how Sean Mackey runs every Mr-Glass job in Fort Worth, and the process reflects it.
- 1
Call or book online. A live person answers, any hour, and schedules a visit at a time that works for you.
- 2
We measure and diagnose. The tech confirms the exact door dimensions, identifies the Mr-Glass series, and checks for frame damage, water intrusion, or structural issues behind the slab.
- 3
You get a written price. We quote the job in writing before anything is ordered. No change orders, no arrival-day surprises. If we discover something mid-install, we stop and show you before spending another dollar.
- 4
Parts decision. If your Mr-Glass door is still under a transferable warranty, we use OEM parts and document the work so your warranty stays intact. If it’s out of warranty, we discuss whether OEM or a quality aftermarket equivalent makes better sense for your home and your budget.
- 5
Installation. We remove the old door, correct any rough-opening issues, set the new unit, and seal it properly. The tech runs through the full operation with you before leaving: open, close, lock, latch, and light test.
- 6
Cleanup and documentation. We haul the old door away and leave the entry as clean as we found it. You’ll get before-and-after photos and a digital invoice you can pay from a link.
What Mr-Glass Door Replacement Costs in Fort Worth
Here are the real price ranges we quote in Fort Worth, not the phone-number-first estimates you’ll get elsewhere. Prices reflect labor, materials, haul-away, and the 365-day warranty.
- Replace glass pack only (seal failure): $450 – $900
- Replace slab only, standard Mr-Glass entry door: $1,200 – $2,200
- Replace full pre-hung Mr-Glass entry unit: $2,400 – $4,800
- Replace Mr-Glass sliding patio door (standard 6-foot): $1,800 – $3,600
What moves the number: door size, glass package, frame replacement versus slab replacement, whether the existing rough opening needs correction, and OEM versus aftermarket parts. Every estimate includes a written line-item breakdown before you approve anything. Call (682) 354-9300 to get your exact price, free.
Why Fort Worth Homeowners Call Juniper Windows Fort Worth for Mr-Glass Work
We’re the windows-and-doors specialist in the Relay Home Co. family, and Fort Worth homeowners call us for Mr-Glass work because we’ve been doing it since 2001 without the runaround. Every Mr-Glass replacement we install carries the 365-Day Done Right Promise: if it’s not right, parts and labor, we make it right for a full year. That’s in writing on every project.
Our techs are background-checked and uniformed, and they know Mr-Glass hardware well enough to tell you in the first visit whether a door should be repaired or replaced. We don’t upsell replacements when a $50 hinge rebuild solves the problem. And if Mr-Glass isn’t the right product for what your home needs now, we also install PGT, CGI, CWS, and ES Windows doors, so the right fit is never a compromise.
FAQs
Yes, and we protect the warranty by using OEM parts and following manufacturer install procedures whenever a Mr-Glass door is still covered. We document the work so your claim stays valid. If your warranty has lapsed, we’ll show you the price difference between OEM and quality aftermarket parts before you decide. Call (682) 354-9300 and we’ll check your model’s warranty status for free.
In most Mr-Glass doors with a failed seal, we can replace the insulated glass pack without touching the frame, which keeps your cost well under $1,000. If the frame is warped, rotted, or the slab is bent, a full door replacement is the only honest fix. We’ll tell you which route makes sense during the free estimate, and the price you approve is the price you pay.
Most stock Mr-Glass door replacements are installed within 3 to 7 business days of your approved quote. Custom sizes or special glass packages add lead time, and we’ll give you a firm install date in writing before you commit. If your door won’t close or lock, call (682) 354-9300 and we’ll prioritize your visit.
OEM parts come from Mr-Glass’s manufacturing line and match your original door exactly, which matters if the door is still under warranty. Aftermarket parts are made to the same dimensions by third-party suppliers and usually cost 20 to 30 percent less. We recommend OEM for warranty doors and aftermarket when your priority is getting a solid, long-lasting replacement at the best price. Either way, the workmanship carries our 365-Day Done Right Promise.
No. The written price we give you before work starts is the price you pay, unless you ask for additional work or we uncover damage that was hidden behind the old door, which we’ll show you and get your approval on before proceeding. No surprise invoices, no door-day adjustments. That’s how Juniper Windows Fort Worth has operated in Fort Worth for more than two decades.
Get Your Free Mr-Glass Door Replacement Estimate in Fort Worth
If your Mr-Glass door is dragging, fogging, leaking, or just past its prime, call (682) 354-9300 and we’ll come measure it, diagnose it, and hand you a written price. That price holds. The install is clean, the warranty is real, and the door will close like it should. Juniper Windows Fort Worth serves all of Fort Worth and the surrounding Tarrant County area.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.