New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Door Installation: The Fort Worth Owner’s Guide
ECO Window Systems door installation in Fort Worth typically runs $850 to $1,900 installed, depending on the door slab, hardware, and whether the frame needs realignment. We stock ECO-compatible parts on our trucks and can usually schedule the swap within the same week. Most Fort Worth homeowners call us after their door starts dragging on the threshold, the lock won’t line up, or the frame has shifted enough that daylight shows through the weatherstripping.
If you’re dealing with a door that’s sticking, sagging, or letting air through, this page covers exactly what you need to know before you spend a dollar. Sean Mackey and our crew have replaced enough ECO Window Systems doors across Tarrant County to know which parts fail first in Texas heat and which replacements actually hold up.
Which ECO Window Systems Models This Applies To
ECO Window Systems doors show up in a lot of Fort Worth homes built or renovated between roughly 2005 and 2020. The brand isn’t exclusive to high-end builds; you’ll find these doors everywhere from older Fairmount bungalows to newer developments near Alliance. The compatibility range matters because ECO used different hinge and threshold specs across their sliding patio, hinged entry, and French door lines.
The fastest way to identify your model: look for a small white or silver sticker on the door’s vertical edge or the top rail. It’ll show a series code, usually formatted like ECO-D-XXXX or similar. If the sticker’s gone (Texas sun eats those labels), measure the door slab. ECO’s most common entry doors run 36 by 80 inches, but their patio sliders are trickier because the roller assemblies changed between the 2014 and 2018 production runs. Slapping a new-generations roller into an older ECO frame doesn’t fit, and we’ve seen homeowners learn that the hard way after a YouTube tutorial.
On OEM versus aftermarket: ECO’s factory hinges and rollers are fine, but for anything involving weatherstripping or thresholds, we typically use aftermarket equivalents that perform better in Texas conditions. The factory door sweeps on ECO units tend to flatten and crack within four to six Fort Worth summers. The aftermarket versions we carry use denser vinyl and hold their shape longer. Juniper Windows Fort Worth is an independent installer, not an ECO distributor, so we don’t have to push a brand-specific part when a better option exists. We also stock parts for PGT, CGI, and CWS doors, which helps when a Fort Worth home has mixed-brand openings.
Signs Your ECO Window Systems Door Installation Is Failing
- Door drags or scrapes the threshold. The hinges have loosened or the slab has settled slightly. On ECO entry doors, the top hinge takes the most load and tends to pull away from the frame first. In Fort Worth’s clay-heavy soil, foundation micro-movement speeds this up, especially in older neighborhoods like Stop Six or Poly.
- Lock latch misses the strike plate. The frame has shifted, not the lock. You can file the strike plate as a stopgap, but the underlying issue is usually the frame itself pulling out of square. This is common after a season of extreme heat followed by a wet spring.
- Daylight visible around the door edges. Weatherstripping is compressed, torn, or the door is out of alignment. On ECO doors, the original weatherstripping is rated for roughly 5-7 years; after that, it loses compression and won’t seal.
- Condensation or fogging between glass panes. The insulated glass unit has lost its seal. This isn’t repairable in place; the glass insert gets replaced. ECO’s standard dual-pane units aren’t inherently fragile, but Fort Worth’s temperature swings between August and January stress the seal material over time.
- Slider door jumps the track or hangs up. The roller assemblies have worn down. ECO patio slider rollers are steel with nylon shells on some series, and once the shell cracks, the door grinds instead of glides. Left alone, this scores the aluminum track and turns a $40 roller swap into a full track replacement.
Replacement Cost & What’s Included
Here’s what we charge in Fort Worth, with the price locked in writing before any work starts:
| Service | Typical Installed Price |
|---|---|
| Entry door re-hang and realignment | $250 – $450 |
| Weatherstripping and threshold replacement | $180 – $350 |
| Roller assembly replacement (sliding door) | $200 – $400 |
| Strike plate and hinge replacement | $150 – $300 |
| Full door slab replacement (ECO-compatible) | $850 – $1,900 |
Every line item includes parts, labor, haul-away of the old material, and our 365-Day Done Right Promise: if the work isn’t right, we make it right, for a full year, parts and labor, in writing. The range on a full slab comes down to door size, glass configuration, and whether the frame needs re-shimming. We give you the exact number before the first screw turns, and that number doesn’t change unless you change the scope.
DIY or Call Us?
Here’s the honest split. If the issue is a loose hinge screw, a torn door sweep, or a dirty roller track, you can absolutely handle that in an afternoon with basic tools. Worth checking before you spend money. Where Fort Worth homeowners should pause is anything involving removing the door slab, adjusting the frame, or working with tensioned components like self-closing hinges. A full slab weighs 60 to 90 pounds depending on the glass package, and dropping one on a foot or a tile floor is expensive in ways that have nothing to do with door parts.
Frame realignment is the one we’d gently steer you away from. Getting a door frame square again means knowing how much to shim, where, and with what. Too much shim and the brick moldings split; too little and you’re back to the same problem in six months. If you’d rather have it done once and done right, call us at (682) 354-9300 and we’ll give you a written estimate before anything starts.
FAQs
Plan on 15 to 25 years for the slab itself, with weatherstripping and rollers needing replacement every 5 to 8 years in the Texas climate. The frame usually outlasts everything else unless water gets behind it. Call (682) 354-9300 and we’ll assess what’s worth replacing versus repairing.
Yes, in most cases. Hinges, rollers, sweeps, thresholds, and strike plates are all replaceable parts, and we do those swaps same-week in Fort Worth. Full replacement only makes sense when the slab is warped, the glass seal has failed, or the frame has structural damage. We’ll tell you which one applies before you pay anything.
Most part replacements and realignments take 90 minutes to 2 hours, measured from the time our technician starts work at your door. Full slab replacements usually run half a day. You’ll get a live arrival time and before-and-after photos, because standing around waiting on a contractor in August isn’t anyone’s idea of a good afternoon.
We carry ECO-compatible hinges, rollers, sweeps, thresholds, and strike plates on our trucks, along with parts for PGT, CGI, and CWS doors. Weatherstripping profiles vary by series, so we’ll match the part using the sticker on your door edge or the slab dimensions. If a specific part needs ordering, we’ll tell you the lead time up front, in writing.
Get the numbers right up front, and the install takes care of itself. Call (682) 354-9300 to schedule your free estimate, and we’ll put the price on paper before a single screw turns.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.