New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Installation: The Fort Worth Owner’s Guide
If your ECO Window Systems window is fogged, binding, leaking, or simply past its service life, we stock the parts and handle the install in Fort Worth. A full ECO Window Systems window installation typically runs $650 to $1,800 per window installed, depending on size, frame condition, and glass package, and most swaps are done in a single visit. Homeowners usually discover the need when condensation appears between the panes, when a crank or balance fails, or when the window won’t seal against a Fort Worth summer. The frame or sash may still look fine, but the operating hardware or the insulated glass unit has reached the end of its run.
Key Takeaways
- We install ECO Window Systems-compatible parts and match OEM specs for existing frames
- Typical installed cost: $650 to $1,800 per window in Fort Worth
- Most single-window repairs are done in one visit
- Written price before work starts, backed by the 365-Day Done Right Promise
Which ECO Window Systems Models This Applies To
ECO Window Systems builds a handful of product families on the hurricane coast and the Gulf Coast, and most Fort Worth homes we service carry one of three: the ECO Impact series, the ECO Vinyl line, or older ECO aluminum frames that predate the current impact-rated era. The part that needs replacing depends on which family you have, and that’s where compatibility gets real. An ECO Impact sash glass unit is not interchangeable with an ECO Vinyl double-pane unit, even when the dimensions match on paper. The glazing bead profile, the frame depth, and the balance system differ between series.
To identify your window, look for the manufacturer label on the inside of the frame or sash, usually a small white or silver sticker with the ECO logo, series name, and a serial number. If the sticker is gone, measure the visible glass width and height, then check the frame depth at the sill. ECO Impact frames typically sit deeper than 3.25 inches. ECO Vinyl frames usually run 2.75 to 3 inches. We use those two measurements to narrow the field before we even pull the sash. As an independent installer, we are not affiliated with ECO Window Systems, but we carry OEM parts and source quality aftermarket equivalents where they match or exceed the original spec. For TX heat and UV exposure, we lean OEM or aftermarket with a Low-E3 coating, because a bare double-pane unit in a Fort Worth west wall ages fast.
Signs Your ECO Window Systems Window Installation Is Failing
- Condensation between the panes. This means the insulated glass seal has failed and the desiccant is saturated. The window still opens, but it’s no longer insulating, and the fog won’t wipe off because it’s inside the unit.
- Hard cranking or a sash that drops. On casements and single-hung units, this points to a worn crank mechanism or a failed spiral balance. In Fort Worth’s dry, dusty summers, grit works its way into the crank gears and accelerates wear.
- Drafts you can feel around the sash edge. Weatherstripping compresses over time, especially on south and west exposures where afternoon heat cycles the material harder. The frame may be fine, but the seal path is not.
- Visible sealant separation or dry-rotted frame corners. On older ECO aluminum frames in wood rough openings, seal failure at the corners lets water in. This one matters in Fort Worth because spring storms and flash rain will find any gap.
- Glass that rattles in wind. A loose glazing bead or failed setting blocks means the unit is moving inside the sash. Left alone, it cracks or chips at the edge, and the whole unit has to go.
Replacement Cost & What’s Included
In Fort Worth, a single ECO Window Systems window installation runs $650 to $1,800, and the spread comes down to three things: glass package, size, and what the frame needs. A standard double-pane Low-E unit in a 36×48 vinyl frame sits near the bottom of that range. An impact-rated unit in a larger opening with frame-to-sill flashing, foam-insulated balance covers, and new weatherstripping lands near the top. We give you a written price before any work starts, and that number covers the part, labor, haul-away, and a full year of coverage through the 365-Day Done Right Promise: 365 days, parts and labor, in writing. No estimate that turns into a different invoice at the door.
| Job Scope | Typical Fort Worth Installed Price |
|---|---|
| Single ECO Vinyl sash glass replacement | $650 – $950 |
| ECO Impact sash glass replacement | $900 – $1,400 |
| Full ECO window install, standard size | $850 – $1,400 |
| Large or complex ECO window install | $1,200 – $1,800 |
Where you live in Fort Worth matters, too. Fairmount and the older historic districts often have non-standard rough openings that need custom trim work, which adds labor. Newer builds in Alliance or Walsh Ranch tend to have cleaner openings and faster installs. Get the numbers right up front, and the install takes care of itself. Sean Mackey and our Fort Worth crew price every job line by line before we touch a single screw, and we won’t change that number unless we find structural damage we couldn’t see, which we’ll document and price separately in writing.
DIY or Call Us?
Here’s the honest split. If the issue is loose weatherstripping, a dirty track, or a handle that wiggles, you can check those yourself in ten minutes. Tighten the hardware, clean the track, reset the weatherstripping. But anything involving the glass unit, the balance system, or a crank that binds is not a weekend project. The glass units are heavy, the balance springs hold real tension, and the sealant work has to be right or the window leaks in the next Fort Worth storm. We’ve pulled more than a few DIY jobs apart where the owner used the wrong sealant and the frame held water for a season before they noticed. That repair cost triple what the original fix would have. No judgment, but the math isn’t friendly. If you’re unsure, call (682) 354-9300 and we’ll talk it through.
FAQs
Realistically, 15 to 25 years for the frame and 10 to 20 years for the insulated glass unit, depending on exposure. West-facing walls in Fort Worth lose seals faster because the afternoon sun cycles the unit through bigger temperature swings than north or east exposures ever see.
Yes, often. If the frame and sash are sound, we can replace just the glass unit, the balance system, or the crank hardware without pulling the whole window. We’ll always quote the repair first and tell you if a full replacement is the better money. Call (682) 354-9300 for an exact quote, estimates are free.
Most single-window repairs or part replacements are done in 60 to 90 minutes once the right part is in hand. If we’re doing a full window replacement with frame work, plan for 2 to 3 hours. We’ll give you a live arrival time and photo updates as the work progresses.
We stock the most common ECO balance systems, cranks, handles, weatherstripping profiles, and setting blocks on our trucks. Glass units are cut and sealed to order for your specific frame, so those take a few days to source. We also stock PGT, CGI, and CWS parts for other windows in your home, so one visit can cover more than one brand.
If you’ve got an ECO Window Systems window that isn’t doing its job, call Juniper Windows Fort Worth at (682) 354-9300 for a free estimate. A real person answers the phone, we’ll ask the right questions, and you’ll have a written price before any work starts.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.