New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Door Installation: The Fort Worth Owner’s Guide
ES Windows door installation in Fort Worth typically runs $1,850 to $4,200 fully installed, depending on the door series, size, and whether the frame needs replacement work. If your existing ES Windows door is sagging, sticking, or letting daylight through the weatherstripping, we can usually get a factory-spec match ordered and on the schedule within 5 to 7 business days. Most Fort Worth homeowners discover the problem after a spring storm exposes a failed seal, or when the door starts dragging against the threshold and every close sounds like gravel on glass.
We stock ES Windows-compatible hinges, rollers, locking hardware, and weatherseal kits on our trucks, and we install ES Windows doors across Tarrant County. Juniper Windows Fort Worth is an independent installer, not affiliated with ES Windows, but we’ve worked with their product line long enough to know which parts interchange and which ones don’t. And around Fort Worth, where summer heat bakes door frames and spring thunderstorms test every seal, that knowledge matters.
Which ES Windows Models This Applies To
ES Windows makes sliding glass doors, hinged terrace doors, and stacking multi-panel systems. The compatibility gotcha we see most often in Fort Worth: ES Windows uses different roller assemblies between their 6000 series and their impact-rated 8000 series sliding doors. If you grab the wrong roller set, the door will sit too high or too low in the track, and the lock won’t line up. Getting the series number right before ordering parts is the difference between a one-visit fix and a two-week headache.
You can identify your ES Windows door series by checking the corner of the glass or the edge of the door panel for a small etched label. It’ll show the series number, glass spec, and a manufacturing date code that looks like a letter followed by four digits. If the label has worn off (common on Fort Worth doors facing direct west sun), we can still match the part by measuring the panel thickness, roller housing width, and the spacing between the lock set screw holes. ES Windows panels run thicker than many competitors’ units, typically 1-3/4″ to 2-1/4″ depending on whether they’re impact-rated, so a generic door part from a big-box store rarely fits correctly.
On the OEM-versus-aftermarket question: for rollers, hinges, and weatherstripping, we’re comfortable using quality aftermarket equivalents that match or exceed the original spec. For locking hardware, we recommend OEM ES Windows parts. Their lock geometry is specific enough that aftermarket substitutes tend to bind or wear the strike plate unevenly. We keep both on hand and we’ll tell you which one your door actually needs.
Signs Your ES Windows Door Installation Is Failing
- Door drags across the threshold or sticks halfway: This is almost always a worn roller assembly or a hinge that’s lost its bearing. Fort Worth’s fine clay dust works into the roller tracks and grinds the nylon wheels down until the panel rides on the aluminum rail.
- You can see daylight or feel air around the door edges: The weatherseal has compressed or torn. ES Windows doors use a two-fin vinyl gasket that hardens in Texas heat after 8 to 12 years, and once it hardens, it stops sealing.
- The lock catches but the door still rattles in the frame: The roller height is out of adjustment, which lets the panel sit crooked in its track. Left alone, this wears the strike plate and eventually the lock won’t engage at all.
- Condensation or fog appears between the glass panes: The insulated glass unit’s seal has failed. This isn’t a door parts swap; it means a new IG unit ordered to your ES Windows panel’s exact thickness and tint.
- The door gets harder to open every month: A gradual increase in effort usually points to a failing roller or a settling frame. In Fort Worth’s clay soil, slab movement shifts door frames by fractions of an inch, but that’s enough to throw off ES Windows’ tight clearances.
Replacement Cost & What’s Included
For a complete ES Windows door installation in Fort Worth, here’s what the numbers actually look like:
- Roller replacement (sliding door): $180 to $340 per door, including new rollers and track cleaning
- Weatherseal replacement: $120 to $260 per door, depending on door size and seal type
- Lock and strike plate replacement: $220 to $450, OEM ES Windows hardware
- Full door panel replacement (non-impact): $1,850 to $2,900 installed
- Full door panel replacement (impact-rated): $2,600 to $4,200 installed, depending on size and glass package
Every quote is a written line-item price before we touch the door. No change orders, no “we found more damage” phone call. If the part arrives and it’s wrong, that’s our problem to fix, not an extra line on your invoice. The installation itself is covered by our 365-Day Done Right Promise, in writing, parts and labor. If it isn’t right, we make it right for a full year.
If your door is dragging, sticking, or leaking air, call (682) 354-9300 for a free estimate on an ES Windows door repair or replacement in Fort Worth.
DIY or Call Us?
Here’s my honest split on this. If you want to check the visible stuff before calling anyone: look at whether the door sits level in its frame, whether the track has visible debris, and whether the weatherseal is cracked or flattened. That’s useful information for whoever does the work.
But actually pulling an ES Windows door panel off its track is a different animal. These panels weigh 150 to 300 pounds, and once they’re off the rollers, there’s no graceful way to put them back without lifting equipment and a second person. Getting the panel angle wrong can crack the glass or bend the frame, and a dropped door panel isn’t covered by any warranty I’ve ever read. Sean Mackey and the crew at Juniper Windows Fort Worth have the panel carriers, the correct shims, and the curse-word vocabulary for when a Fort Worth foundation has moved things just enough to make everything 1/16″ off. Call (682) 354-9300 and we’ll send someone who’s done this a thousand times.
FAQs
With proper installation and periodic roller cleaning, an ES Windows door in Fort Worth typically lasts 20 to 30 years before the panel itself needs replacement. The wear parts – rollers, weatherseal, locks – are the exception, and they typically need attention every 8 to 12 years, faster if the door faces direct afternoon sun or gets heavy daily use. Call (682) 354-9300 for an assessment of your specific door’s condition and a free estimate.
Yes, in most cases. If the panel itself is solid and the glass is intact, we can replace the rollers, weatherseal, hinges, or lock hardware and get the door operating like new for a few hundred dollars instead of a few thousand. Replacement only makes sense when the panel is bent, the frame is rotted or severely out of square, or the glass seal has failed. Call (682) 354-9300 and we’ll give you the repair-vs-replace math in writing before you commit to anything.
Most roller, weatherseal, and lock replacements take 1 to 2 hours on site once the part is in hand. If we need to order an OEM ES Windows part, add 3 to 7 business days for delivery before we can schedule the install. Full door panel replacements typically take half a day including the frame work. Call (682) 354-9300 to get your specific part checked and a timeline you can plan around.
We stock the most common ES Windows wear parts – rollers for the 6000 and 8000 series, standard weatherseal profiles, and lock sets – on our service trucks in Fort Worth. Less common parts, like impact-rated panel glass or specific hinge sets, we order directly so you get a factory-correct match rather than a close-enough substitution. Call (682) 354-9300 and we’ll check our inventory while you’re on the phone. A real person answers, every time.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.