New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ES Windows Door Replacement in Fort Worth: What to Know First
Replacing a door on an ES Windows product in Fort Worth typically runs $1,100 to $3,800 depending on the series, glass package, and hardware involved. Most single-panel ES Windows door replacements are completed in one visit, usually four to six hours from unload to final walk-through. We give you a written price before any work starts, so the number you approve is the number you pay.
If you own a home with ES Windows sliding patio doors or hinged entry doors and they’ve started sticking, leaking, or fogging between the glass, this page is for you. We’re Juniper Windows Fort Worth, an independent ES Windows service provider, and we handle door replacement jobs across Tarrant County every week. Call (682) 354-9300 and a real person answers, day or night.
How ES Windows Products Fail – and How We Fix Them
- Roller failure on ES Windows 900 Series sliding doors. The 900 Series is common in Fort Worth homes built from the late 1990s through about 2012, and its original steel rollers corrode in our humidity, eventually grinding flat against the track. You’ll feel the door drag, then seize. We replace the rollers with sealed-bearing stainless units and re-grease the track, and the door glides like it did from the factory.
- Fogged insulated glass on ES Windows hinged patio doors. Fort Worth’s temperature swings, from a 100-degree August afternoon to a 35-degree February morning, stress the sealant around double-pane glass on older ES Windows units. The seal breaks, argon escapes, and condensation collects inside the glass. You can’t buff that out. We replace the glass insert itself, matching the original tint and Low-E coating so the new pane doesn’t look like a patch.
- Warped door slabs on south-facing ES Windows installations. Any door facing south in Fort Worth takes direct sun for six-plus hours a day, five months a year. ES Windows vinyl-clad door slabs hold up better than most, but we’ve seen older units bow slightly at the handle side, making the deadbolt misalign. We replace the slab and re-shim the frame so the latch catches cleanly without forcing.
- Weep-hole blockage causing sill rot on ES Windows 600 Series. The 600 Series sliding doors rely on small weep holes along the bottom track to drain water that gets past the weatherstripping. In Fort Worth, cottonwood seed, dust, and hard-water scale clog those holes fast. Water pools, sits against the sill, and eventually rots the subfloor. We clear the weep system, replace damaged sill components, and show you where to glance quarterly so it never happens again.
- Brittle weatherstripping on ES Windows doors over eight years old. The original EPDM weatherstripping on ES Windows products hardens and cracks after years of Texas heat, leaving gaps that whistle during north winds and let in dust. We strip out the old seals and install new compression weatherstripping, tested with a smoke pencil at the end of the job to prove no air is moving through.
Our ES Windows Door Replacement Process
Here’s exactly how a door replacement works when you call Juniper Windows Fort Worth about an ES Windows unit.
- 1
You call, we answer. A live person picks up at (682) 354-9300, asks what the door is doing, and books a visit that fits your day. You get a live arrival time you can track from your phone.
- 2
We diagnose on site. Our tech checks the slab, frame, rollers, weatherstripping, glass, and hardware. About 40% of the ES Windows doors we look at don’t need full replacement, just a part swap. We’ll tell you straight.
- 3
We show you the numbers. You get a written price for the exact work we recommend, including parts and labor, before anything is ordered or removed. No verbal ballpark that moves later.
- 4
We source the right part. For warranty-sensitive ES Windows doors, we’ll use OEM parts when available and cost-appropriate. For older series where OEM support has thinned out, we use proven aftermarket components, always disclosed before ordering.
- 5
We install and test. The old door comes out, the new one goes in, square and plumb. We run a water test, check the hinges and latch, and adjust the weatherstripping until nothing rattles or leaks.
- 6
We walk you through it. You get before-and-after photos in your digital invoice, and we leave the work area cleaner than we found it. If anything isn’t right within 365 days, parts and labor, we return and fix it. In writing.
What ES Windows Door Replacement Costs in Fort Worth
Here’s what we actually see on Fort Worth jobs, in real dollar ranges.
- Sliding door roller replacement: $180 to $420 per panel, depending on whether we’re doing a single roller set or all four corners plus track work.
- Insulated glass replacement in an existing ES Windows door: $450 to $1,100, driven by glass size and whether it’s standard Low-E or impact-rated glazing.
- Full sliding door slab replacement (ES Windows 600 or 900 Series): $1,800 to $3,200, including demolition, new slab, hardware, and sealing.
- Full hinged entry door replacement with ES Windows product: $2,200 to $3,800, depending on sidelites, glass package, and hardware grade.
What moves the price: glass type, door size, whether the frame itself is compromised, and whether we’re matching existing hardware or replacing it. Impact-rated glass, required in some newer Fort Worth builds east of I-35W where storm codes tightened, adds $300 to $700 per door. Get a written quote for your specific door. Call (682) 354-9300 for a free estimate, and the number you see is the number you pay.
Why Fort Worth Homeowners Call Juniper Windows Fort Worth for ES Windows Work
We’ve been doing windows and doors since 2001 as part of the Relay Home Co. family, and we’re not a general remodeler dabbling in glass. Doors are what we do. Every ES Windows door replacement gets a written price before any work starts, and it’s covered by the 365-Day Done Right Promise: if it’s not done right, we make it right, parts and labor, for a full year. Your tech arrives in uniform, background-checked, and you can track their arrival live on your phone. And because we carry eight product lines including PGT, CGI, CWS, and ECO Window Systems, if an ES Windows door replacement isn’t the right call for your situation, we’ll tell you and offer the door that actually makes sense. No brand loyalty over your best interest.
Sean Mackey, our owner, grew up learning trade fundamentals at Los Angeles Trade-Technical College and has spent nearly two decades on job sites. He’s the one who insists every install is airtight before the truck leaves your driveway. Get the numbers right up front, and the install takes care of itself.
FAQs
In most cases, yes, we can replace only the insulated glass unit in your ES Windows door, typically for $450 to $1,100. If the door slab itself is warped, the frame is pulling away from the rough opening, or the rollers and track are beyond servicing, full replacement makes more sense. Call (682) 354-9300 and we’ll tell you which situation you’re in, with a written price either way.
It depends on the door’s age and what component failed. Many ES Windows glass and hardware warranties run 10 to 20 years from the original install, and if the door is still under warranty, we’ll help you understand what the manufacturer covers before you spend your own money. As an independent provider, we don’t file claims for you, but we’ll give you the documentation you need. If the warranty has lapsed or doesn’t apply, our 365-Day Done Right Promise covers our workmanship and parts for a full year.
Common parts like rollers, weatherstripping, and handle sets for ES Windows 600 and 900 Series doors are usually in hand within two to five business days. Custom glass panels take longer, usually seven to fourteen days depending on the Low-E or impact-rated spec. When you schedule, we tell you the expected parts timeline before we start, not after we’ve taken your door apart.
Sometimes yes, sometimes no. If the failure is limited to rollers, weatherstripping, or a handle set, a $200 to $500 repair buys you years more service. If the glass is fogged, the slab is warped, and the frame is soft at the sill, you’re looking at a repair cost that approaches replacement territory, and we’ll tell you that plainly. We never push a replacement when a repair will honestly do the job.
Yes. We work across Fort Worth and Tarrant County, from Fairmount and the Historic District to Wedgwood, North Fort Worth, Alliance, and outlying areas. If you’re in Fort Worth, we’ll come look at your ES Windows door, give you a written price, and get it handled.
Get Your ES Windows Door Replacement Started
If your ES Windows door is sticking, leaking, fogged, or just not closing like it used to, call (682) 354-9300 now. We’ll schedule a visit, diagnose the issue on site, and hand you a written price before any work begins. Free estimates, real answers, no surprises.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.