New windows and doors improve comfort, cut energy bills and add long-term value to your home. Juniper Windows Fort Worth pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Sliding & Patio Doors: The Fort Worth Owner’s Guide
We stock and install CGI-compatible sliding and patio door parts across Fort Worth, with most roller, track, and lock replacements running $180 to $640 installed depending on the part and your door’s series. If your CGI slider is grinding, sticking, or letting a Texas dust gust through the seam, you’re usually looking at worn rollers, a scored bottom track, or a latch that’s given up after a few thousand open-and-close cycles. The typical Fort Worth homeowner discovers the problem the hard way: the door suddenly takes two hands and a hip to move, the lock no longer catches, or you see daylight at the top corner where the panel has sagged off its plumb. We keep the common CGI parts on the truck, so most sliding door repairs in Fort Worth happen same day when you call (682) 354-9300.
Which CGI Models This Applies To
CGI has produced sliding and patio door lines under several series names over the years, and the parts are not universal across all of them. The classic lines in Fort Worth homes include the CGI Estate, Sentry, and the later impact-rated versions built for the Texas storm corridor. The easiest way to identify your door is to check the bottom edge of the operable panel or the head track for an etched AAMA label, which lists the series, glass type, and impact rating if applicable. If the label is worn off, a photo of the roller assembly and track profile sent to us usually narrows it down. Here’s the compatibility gotcha most homeowners don’t know: CGI changed roller housing sizes between series, so a roller that fits a Sentry will not seat correctly in an Estate track. Many online parts sellers don’t flag that distinction. We do. When you order from us, we match the physical part to the door after looking at your photos or, better, after one of our techs pulls the panel and sees it in person. For Fort Worth owners deciding between OEM and aftermarket, the honest summary is this: OEM CGI parts preserve original fit and finish, while quality aftermarket rollers with sealed bearings often outlast the factory nylon wheels that shipped with older doors.
Signs Your CGI Sliding & Patio Doors Is Failing
- The door drags or needs two hands to slide. This is almost always a roller failure. The nylon or steel wheels wear flat on one side after years of bearing the panel’s weight. Once a wheel stops rolling and starts skidding, the track gets chewed up, which makes the problem worse every month you wait.
- You feel a bump or clunk mid-track. A worn roller that has flattened creates a dead spot. The door hops over it, then drops. That drop is what eats the aluminum track and eventually breaks the roller housing.
- Daylight or air leaks through the top or side of the closed panel. A sagging panel is typically a roller adjustment issue at first, but if left alone, it distorts the weatherstripping and pulls the locking hardware out of alignment. In a Fort Worth summer, a quarter-inch gap at the top of a sliding door moves a measurable amount of cooled air out of the house.
- The latch or handle flops loosely and won’t secure. Internal lock rods and the handle spring wear out on high-use doors. On CGI patio doors built before roughly 2010, the locking hardware was frequently a weak point, and the internal linkage simply snaps with enough cycles.
- The door feels heavier than it used to. Sliding panels are heavy, but a properly rolling CGI panel glides with one finger. When it feels like it doubles in weight, the rollers have seized and the panel is now dragging metal on metal, which is also loud enough that you’ll hear it across the room.
Replacement Cost & What’s Included
In Fort Worth, most CGI sliding door part replacements land between $180 and $640 installed. Roller swaps run on the lower end, around $180 to $340 per panel, while a full track replacement with new rollers and realigned lock hardware can reach $500 to $640. Here is what that includes: the part itself, the labor to remove and reset the heavy panel, track cleaning and lubrication, lock alignment, and a written line-item price before we touch the door. You’ll never hear an estimate on the phone and a different number at the door. That written price is the price. The variables that push cost are panel size (a 12-foot patio slider costs more to handle than a standard 6-footer), track condition, and whether we’re matching an older CGI series whose parts must be ordered. Every repair carries our workmanship warranty, and if a part we install fails within the covered period, the second service visit is free.
DIY or Call Us?
Sliding door panels are heavy. A standard CGI glass panel weighs anywhere from 120 to 300 pounds, and lifting one out of its track without the right technique is how homeowners end up with shattered glass, bent frames, or a pulled back. What you can safely do yourself: vacuum the track, inspect for obvious debris, and send us photos if the lock seems loose. What we don’t recommend: pulling a panel to reach the rollers without an extra set of hands and a clear understanding of the adjustment screws. The risk and the back strain usually cost more than a tech call. If you’re in Fort Worth and the door is already binding, call (682) 354-9300 and we’ll get it sorted before the panel does real damage to the track.
FAQs
On a Fort Worth home, expect 8 to 15 years from factory rollers depending on use and how often the track is cleaned. North Texas dust is fine and abrasive; once it works into the roller bearings, the wear accelerates. Doors on busy patio routes, think the one that leads to the grill, wear out closer to the 8-year mark.
If your door is in its second decade and rolling rough, that is not premature failure. That is normal service life. Call (682) 354-9300 and we’ll quote the roller swap at no charge.
Most sliding door problems are repairable without replacing the door. Rollers, tracks, weatherstripping, and lock assemblies are all serviceable parts. You only get into full door replacement territory when the frame itself is bent, the glass is compromised, or the panel has been jumped out of square by a foundation shift. In Fort Worth clay soil, foundation movement is real, and a door that was fine for years can suddenly bind if the slab shifts underneath it. We’ll tell you straight which situation you’re in.
Most single-panel roller and track repairs finish in 60 to 90 minutes once our tech is at the house. A full track replacement on a large multi-panel CGI setup can run two to three hours. You’ll get a live arrival time before we show up, and before-and-after photos of the work when it’s done.
Yes. We keep the most common CGI roller assemblies, track sections, and lock hardware on the truck for same-day service in most Fort Worth neighborhoods, including Fairmount, Ridglea Hills, Arlington Heights, and the newer builds out toward Walsh Ranch. For less common CGI series parts, we order direct and have them within a few business days. We also carry parts for PGT, CWS, and ES Windows sliding doors, so if you have a mixed house, we can address it in one visit.
Written by Sean Mackey, Owner, Juniper Windows Fort Worth at Juniper Windows Fort Worth, serving Fort Worth and nearby areas.
Six Reasons Homeowners Choose Juniper Windows Fort Worth
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.