CGI Door Replacement Nationwide

CGI Door Replacement in Fort Worth: What to Know First

CGI door replacement in Fort Worth typically runs between $2,800 and $7,500 depending on the door style, glass package, and whether the frame itself needs rebuilding. We complete most CGI door replacements in 1 to 2 days once your door arrives, and every job starts with a written price before we order a single part. We’re an independent CGI service provider, which means we can source your door and hardware without pushing you through a manufacturer-mandated channel.

Call (682) 354-9300

This page is for Fort Worth homeowners who already own CGI doors (or are replacing them after storm damage) and want a straight answer on how this works. If you need a ballpark number for your specific door, call (682) 354-9300 and Sean or a member of our team will walk you through it. No voicemail maze, no callback queue.

How CGI Products Fail – and How We Fix Them

CGI builds a seriously tough impact door. We install and replace them across Fort Worth, and we’ve learned exactly where they wear down over time. Here are the failure modes we see most often, and what we actually do about them.

• Sentinel series threshold rot at the sill. On older CGI Sentinel doors, the sill track sits on a wood substrate that wicks moisture from Fort Worth’s clay-heavy soil. The door slab stays solid, but the frame rots underneath. We don’t patch this with caulk. We pull the entire unit, replace the sill with a rot-proof composite, and set the new door on a properly sloped pan. That fix holds through the freeze-thaw cycles we get every January.
• Estate Collection roller wear on heavy slabs. CGI’s Estate Collection doors run 30 to 40 pounds heavier than a standard hinged door because of the impact glass. Over time, the rollers flatten and the slab drags, which makes the door feel like it’s grinding itself open. Homeowners often assume the door is warped. It isn’t. We replace the roller assemblies with upgraded ball-bearing units, and the door glides again without a full replacement.
• Impact glass delamination on 10+ year old doors. CGI’s laminated impact glass has an interlayer that can begin to cloud or separate around the edges after a decade of Texas sun exposure. It’s a slow change, and most owners notice it first at eye level. Once delamination starts, the glass can’t be resealed. We replace the panel with current-spec CGI glass (or a certified equivalent) so the door still meets Fort Worth’s windborne debris requirements for coastal-adjacent code zones.
• Multipoint lock binding on the Targa series. The Targa line uses a three-point locking system that binds when the door slab settles even 3/16 of an inch. You twist the handle, and the top latch won’t retract. It feels like a lock failure. Usually, it’s the door sagging on worn hinges. We reset the slab, replace the hinges with heavy-gauge stainless, and the multipoint lock engages cleanly again. No new lock needed.
• Weep hole blockages causing interior water streaks. Every CGI impact door has weep channels at the bottom of the frame to drain water that gets past the outer seal. In Fort Worth, they clog with dirt, pollen, and oak debris. Water then pools inside the track and wicks up into the frame. We see this constantly on doors facing east. The fix is meticulous: clean the channels, verify drainage slope, and replace the weatherstripping if it’s compressed. We check this on every CGI door we replace, as part of the install, so you’re not dealing with the same issue two years later.

Our CGI Door Replacement Process

Here’s exactly how a CGI door replacement goes with Juniper Windows Fort Worth, from first call to final walkthrough.

1. 1
   You call (682) 354-9300 and describe the door. A live person answers, every time, 24/7. We ask for the door’s age, the symptoms, and a photo if you have one. That call tells us whether you need a full replacement or a component swap.
2. 2
   We measure and diagnose on site. We visit your Fort Worth home, measure the rough opening, check the frame for rot or settling, and confirm which CGI series you have. We test the lock, rollers, and glass. If it’s repairable, we tell you that instead of selling you a door you don’t need.
3. 3
   You get a written price before anything is ordered. We write the number down. It includes the door, hardware, labor, and disposal. The number on that sheet is the number you pay. No change orders, no “we found something” surprises.
4. 4
   We source the door and parts. For warranty-covered work, we use CGI-authorized components where required. For out-of-warranty doors, we’ll present OEM and quality aftermarket options side by side with real prices, so you decide with your eyes open.
5. 5
   Installation day: one crew, one goal. We remove the old door, repair or replace the frame as needed, set the new unit, and seal it. We flash it properly, including the sill pan. The install isn’t done until the door opens, closes, latches, and seals perfectly.
6. 6
   Test, document, and guarantee. We run the door through full cycles, check the lock engagement, and photograph the finished work. You get before-and-after photos and a digital invoice you can pay from a link. Every CGI door we replace is covered by our 365-Day Done Right Promise: if it’s not right, we make it right, parts and labor, in writing, for a full year.

Sean Mackey runs every Fort Worth install personally. He grew up learning the trade at Los Angeles Trade-Technical College and has spent nearly two decades on job sites, and he still checks each door himself before the truck leaves your driveway. As he puts it, “Get the numbers right up front, and the install takes care of itself.”

What CGI Door Replacement Costs in Fort Worth

Here are the numbers we’re quoting most often for CGI door replacement in Fort Worth right now. These are installed prices, not just materials.

What moves the price: whether the frame is salvageable, the glass package (clear impact vs. tinted or decorative), hardware finish, and whether we’re pulling permits for structural work. If your existing frame is solid, you’re looking at the lower end. If we’re rebuilding the sill and jambs, the number goes up because the labor does. Call (682) 354-9300 for an exact quote on your door. Estimates are free, and the price we give you is the price we honor.

Why Fort Worth Homeowners Call Juniper Windows Fort Worth for CGI Work

We’re not a general contractor who happens to hang a door now and then. Door replacement is what we do, and CGI is a brand we work with regularly across Fort Worth, from Fairmount bungalows to newer builds in Walsh Ranch. The difference shows in the details: we know which CGI models have the roller wear issues, which sills fail first, and which aftermarket parts hold up.

Beyond the CGI knowledge, you’re getting the Relay Standard on every job: a live arrival time you can track, before-and-after photo documentation, and a written price before anything starts. Our techs are background-checked and uniformed, so when we show up, you know exactly who’s at your door. And if your CGI door isn’t the right long-term fix, we’ll tell you. We also install PGT, CWS, ES Windows, and ECO Window Systems, so if another brand makes more sense for your opening, you get an honest recommendation instead of a forced sale.

Every install is covered by the 365-Day Done Right Promise. If the door isn’t right, we return and make it right. No charge, no argument. That’s been our standard since 2001.

FAQs