PGT Door Replacement Nationwide

PGT Door Replacement in Fort Worth: What to Know First

PGT door replacement in Fort Worth typically runs $2,800 to $7,500 for a standard single entry door, and most jobs are completed same-day once the door is on hand. That price range covers tear-out, new door, hardware, sealing, and haul-away. We’re an independent PGT service provider, not a PGT dealer, which means we replace doors honestly: we tell you if a component repair makes more sense than a full replacement, and you get a written price before anything gets ordered. This page is for Fort Worth homeowners with a sagging, warped, or storm-battered PGT door who want straight answers on cost, timeline, and what the replacement actually involves. Call (682) 354-9300 and a real person answers.

Call (682) 354-9300

How PGT Products Fail – and How We Fix Them

We see the same failure patterns across Fort Worth neighborhoods, from Ryan Place to Fossil Creek. Here’s what actually goes wrong with PGT doors, and what we do about it:

• Sagging and binding on the hinge side. This is most common on older PGT WinGuard hinged doors, especially the heavier impact-rated models. The weight of laminated glass pulls on the top hinge until the door shaves the threshold or the strike plate stops lining up. Shimming and hinge replacement can buy time, but once the core shifts, a new slab or full unit is the honest fix. We’ll tell you which one before you spend a dollar.
• Roller failure on PGT sliding glass doors. Fort Worth heat dries out the nylon rollers on PGT 5500 and 7700 series sliders. The door gets harder to push, then grinds across the track. We pull the door, replace the rollers and the track cap, and reset the panel. If the track itself is gouged from years of that grinding, replacement beats a repair that fails again in a season.
• Compromised weatherstripping and air leaks. After five or six Texas summers, the corner seals on PGT doors shrink and split. You feel the draft before you see the gap. On some PGT frames, the original seal profile has been revised, and old-stock OEM weatherstripping doesn’t match the revision. We use the current-profile seal so the door actually closes tight.
• Impact glass seal failure. PGT doors with laminated glass carry a warranty on the glass unit itself, but argon gas can escape as the internal seal ages. You’ll see a cloudy film between the panes that never wipes clean. Glass replacement through PGT’s channel can take weeks; we can often source an IG unit locally and have the door back in service much sooner.
• Frame rot at the bottom corners. This one we see a lot in Tarrant County homes with irrigation overspray hitting the door. Even with PGT’s aluminum cladding, water creeps in around the sill and rots the wood behind it. We cut out the rot, rebuild the corner, and install a sill pan so the new door isn’t born with the same problem.

Our PGT Door Replacement Process

Here’s how a PGT job goes when you call Juniper Windows Fort Worth:

1. 1
   Call and talk to a person. You reach us at (682) 354-9300, 24/7. No phone tree. We ask what the door is doing, what model it is if you know, and when you’re available.
2. 2
   We measure and diagnose. A technician comes out, checks the door, frame, and reveal, and tells you whether you need a slab swap, a full unit replacement, or a component fix. No estimate games.
3. 3
   You get a written price. Parts, labor, haul-away, tax – all on one document before you approve anything. That number doesn’t move unless we find hidden structural damage, and we’d show you photos before we ever ask for more money.
4. 4
   We source the right parts. Where OEM PGT parts make sense for fit and warranty protection, we use them. Where an equivalent aftermarket component is the better value, we say so and explain why.
5. 5
   Install, test, clean. We hang the door, set the reveal, adjust the hardware, and run it through a full open-close cycle. Then we photograph everything so you see what we did.
6. 6
   You get the 365-Day Done Right Promise. If something isn’t right within a year, parts and labor are covered in writing. We come back and fix it. No charge, no argument.

What PGT Door Replacement Costs in Fort Worth

Straight numbers, because calling for a ballpark is a waste of your time. A PGT slab replacement, meaning the door panel only reusing your existing frame, runs $1,800 to $3,400 depending on size and glass package. A full PGT entry door replacement, frame and all, is $2,800 to $5,500. Impact-rated PGT WinGuard doors with laminated glass push higher, $6,000 to $9,500 for a full unit with installation. What moves the price: door width and height beyond standard, impact versus non-impact glass, sidelights, and whether the rough opening needs reframing. Call (682) 354-9300 and we’ll give you an exact written quote after measuring. The estimate is free, and you keep the written number.

Why Fort Worth Homeowners Call Juniper Windows Fort Worth for PGT Work

Because we treat a PGT door replacement like a real construction job, not a handyman stop. We carry eight product lines – PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux – so if a different brand or a more current PGT series fits your opening better, you get that recommendation instead of a sales pitch. Every tech on your job is background-checked and uniformed. You get a live arrival time you can track, before-and-after photos, and a digital invoice. And nothing leaves our shop without a written price and the 365-Day Done Right Promise behind it. Sean Mackey runs our Fort Worth team, and his rule is simple: get the numbers right up front, and the install takes care of itself.

FAQs